Is the Stihl FS 56 a good Trimmer?
The STIHL FS 56/56R/56C/56RC occasional use trimmer is ideal for homeowners with large or difficult areas to trim. Read this instruction manual carefully to reduce the risk of injury while using this STIHL FS 56 Trimmer.
How do you open the fuel tank on a kn FS56?
001BA220 KN FS 56, FS 56 R, FS 56 C, FS 56 RC English 7 marks on the grip of the cap and on the fuel tank opening lining up. Using the grip, press the cap down firmly while turning it clockwise as far as it will go (approx.1/4turn).
Which way do you turn the fuel cap on a FS56?
FS 56, FS 56 R, FS 56 C, FS 56 RC English 26 N Turn the cap counterclockwise (approx.1/4turn). N Remove fuel filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank.
Can a FS 56 be used with a longer mower line?
FS 56, FS 56 R, FS 56 C, FS 56 RC English 13 Using the Mowing Heads Do not use with mowing line longer than the intended length. With a properly mounted deflector, the built-in line- limiting blade will automatically adjust the line to its proper length.
How do you start a Stihl fs56c?
0:271:16Starting Procedures on the Stihl FS40 and FS56C/RC | Rental VillageYouTubeStart of suggested clipEnd of suggested clipSure not to press the throttle lockout or trigger. With your right hand pull up the slack in theMoreSure not to press the throttle lockout or trigger. With your right hand pull up the slack in the line. And then give it a brisk pull on versions would be easy to start pull the string. Steadily.
What kind of gas does a Stihl FS 56 RC use?
Only from STIHL - This patented 50:1 fuel mixture combines non-ethanol, high-octane fuel and premium STIHL HP Ultra Oil.
How does Stihl auto feed work?
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
How much line does a Stihl FS 56 RC take?
Comes with 0.95 cutting line diameter - but can take 0.80 or up to . 105 cutting line diameter.
What fuel does STIHL recommend?
STIHL recommends the use of STIHL MotoMix® premixed fuel which is pre-mixed with STIHL HP Ultra synthetic oil. STIHL MotoMix® contains no ethanol and has a storage life of up to two years.
How much oil do I need for a 50 to 1 ratio?
2.6 fluid ouncesFor a 50:1 ratio of gas to oil, use 2.6 fluid ounces of oil per gallon of gas. For a 40:1 mixture, use 3.2 fluid ounces of oil per gallon of gas.
How do you use a Stihl speed feed head?
0:081:24How to Easily Load Speed Feed® Trimmer Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou simply align the arrow on the knob with the eyelet. Then feed approximately 20 feet of trimmerMoreYou simply align the arrow on the knob with the eyelet. Then feed approximately 20 feet of trimmer line through the eyelet. Be sure to line up the two lengths to ensure an even feed.
What does FS stand for Stihl?
MS= Motosäge = Chainsaw. FS= Freischneider = Line Trimmer. BG= Blasgerät = Handheld Blower. BR= Blasgerät Rückentragbar = Backpack Blower. TS= Trennshleiffer= Cut Off Machine.
Why does my trimmer line run out so fast?
Your trimmer line runs out so fast because the cap is broken, the spool is too short, or the guard is damaged. The cap holds all of the trimmer lines, so it loosens and damages the string if it's chipped or malfunctioning. A short spool provides a shorter, inadequate trimmer line.
What kind of string does a Stihl FS 56 RC take?
It uses dual . 095-inch cutting lines.
How do you grease a Stihl FS 56 RC car?
0:172:11HOW TO GREASE 'STIHL TRIMMER' - YouTubeYouTubeStart of suggested clipEnd of suggested clipAbout four or five turns. Just want it to get a little bit snug so your grease doesn't shoot outMoreAbout four or five turns. Just want it to get a little bit snug so your grease doesn't shoot out right there and then basically all you're going to do is just give it a squeeze.
What size string does a Stihl FS 56 use?
0.105-inchIt uses dual 0.095 or 0.105-inch cutting lines on a 16.5-inch diameter head.
What spark plug does a Stihl FS 56 RC take?
Stihl Spark Plug ChartNGKNGKFS 40 (new), 50, 56, 70, 94, 130, 240, 310, 360, 460CMR6HBPMR7AFS38, 45, 46, 55, 75, 80, 85, 120, 200, 250, 350, 360, 450, 550, 560BPMR7ABPMR7AFS 83CMR7AFS90, 100, 110CMR6H33 more rows
How do you grease a Stihl FS 56 RC car?
0:172:11HOW TO GREASE 'STIHL TRIMMER' - YouTubeYouTubeStart of suggested clipEnd of suggested clipAbout four or five turns. Just want it to get a little bit snug so your grease doesn't shoot outMoreAbout four or five turns. Just want it to get a little bit snug so your grease doesn't shoot out right there and then basically all you're going to do is just give it a squeeze.
How do you adjust a carburetor on a Stihl trimmer?
Start the trimmer and hold the throttle trigger in all the way to get the trimmer head spinning at maximum speed. Turn the H screw clockwise with a carburetor adjustment tool until the head is spinning as fast as it will go, then back off the screw carefully until the RPMs start to decrease.
How do you load a Stihl Autocut 26 2?
2:376:18New STIHL AutoCut C 26-2 - Review and Analysis - YouTubeYouTubeStart of suggested clipEnd of suggested clipOut you twist until your line lines up with your arrow. You cut off a 26 foot piece of line youMoreOut you twist until your line lines up with your arrow. You cut off a 26 foot piece of line you insert it into this hole.
How to operate a FS 56?from stihlusa.com
FS 56, FS 56 R, FS 56 C, FS 56 RC English 10 During Operation Holding and Controlling the Power Tool Always hold the unit firmly with both hands on the handles while you are working. Wrap your fingers and thumbs around the handles. Working Conditions Operate and start your power tool only outdoors in a well ventilated area. Operate it under good visibility and daylight conditions only. Work carefully. Operating Instructions Warning! To reduce the risk of injury from loss of control, never work on a ladder or on any other insecure support. Never hold the cutting attachment above waist height. Warning! Never attempt to operate your power tool with one hand. Loss of control of the power tool resulting in serious or fatal injury may result. To reduce the risk of cut injuries, keep hands and feet away from the cutting attachment. Never touch a moving cutting attach- ment with your hand or any other part of your body.
Can you use a STIHL power tool with an incorrect idle?from stihlusa.com
Warning! To reduce the risk of personal injury from loss of control and / or contact with the running cutting tool, do not use your unit with incorrect idle adjustment. At correct idle speed, the cutting tool should not move. If your power tool shows an incorrect idle adjustment, have your STIHL dealer check your power tool and make proper adjustments and repairs.
Can improper use of instruction manuals cause serious or fatal injury?from stihlusa.com
Read and follow all safety precautions in Instruction Manual – improper use can cause serious or fatal injury.
Can you use a deflector with a brush knife?from stihlusa.com
The deflector may be used in combination with brush knives. The deflector must not be used in combination with mowing heads. The deflector must not be used in combination with grass cutting blades. The deflector must not be used in combination with brush knives.
How to operate a FS 56?
FS 56, FS 56 R, FS 56 C, FS 56 RC English 10 During Operation Holding and Controlling the Power Tool Always hold the unit firmly with both hands on the handles while you are working. Wrap your fingers and thumbs around the handles. Working Conditions Operate and start your power tool only outdoors in a well ventilated area. Operate it under good visibility and daylight conditions only. Work carefully. Operating Instructions Warning! To reduce the risk of injury from loss of control, never work on a ladder or on any other insecure support. Never hold the cutting attachment above waist height. Warning! Never attempt to operate your power tool with one hand. Loss of control of the power tool resulting in serious or fatal injury may result. To reduce the risk of cut injuries, keep hands and feet away from the cutting attachment. Never touch a moving cutting attach- ment with your hand or any other part of your body.
How to stop a FS 56?
FS 56, FS 56 R, FS 56 C, FS 56 RC English 11 In the event of an emergency, switch off the engine immediately – move the slide control / momentary stop switch to 0 or STOP. To reduce the risk of eye and other injury always wear proper eye protection (see the chapter on "Proper Clothing") and ensure that bystanders are at least 50feet (15m) away. To reduce the risk of damage to property, also maintain this distance from such objects as vehicles or windows. Any coworkers who must be in the restricted area should also wear goggles or protective glasses. Stop the engine immediately if you are approached. Warning! The cutting attachment continues to rotate for a short period after the throttle trigger is released (flywheel effect.) Warning! The rotating cutting attachment may fling foreign objects directly or by rico- chet a great distance.
Can you use a STIHL power tool with an incorrect idle?
Warning! To reduce the risk of personal injury from loss of control and / or contact with the running cutting tool, do not use your unit with incorrect idle adjustment. At correct idle speed, the cutting tool should not move. If your power tool shows an incorrect idle adjustment, have your STIHL dealer check your power tool and make proper adjustments and repairs.
Can improper use of instruction manuals cause serious or fatal injury?
Read and follow all safety precautions in Instruction Manual – improper use can cause serious or fatal injury.
Can you use a deflector with a brush knife?
The deflector may be used in combination with brush knives. The deflector must not be used in combination with mowing heads. The deflector must not be used in combination with grass cutting blades. The deflector must not be used in combination with brush knives.
What size string does a Stihl FSA 56 have?
On an 11-inch diameter head, it uses dual 0.080-inch cutting lines. This Stihl 36-volt battery string trimmer weighs 7 pounds and has a straight shaft.
What is the best way to feed a Stihl trimmer line?
As the cutting line is worn down to the point where 2 1/2 inches or less extends from the head, raise the trimmer head slightly off the ground. Allow new line to feed automatically from the spool by holding the trimmer head above the ground with the trigger throttle.
What happens to the string trimmer line?
Trimmers toss small bits of nylon into yards, gardens, golf courses, and roadsides on a daily basis. Birds and animals, both domestic and wild, mistake the plastic as food.
What size line does my Stihl trimmer use?
The standard string for the TrimCut head is 0.105 inches in diameter, but you can install 0.095-inch string on this head. Some versions of the AutoCut head use 0.095- to 0.105-inch string, and some use 0.080- to 0.095-inch string; check the user’s manual for the trimmer head if you aren’t sure about yours.
How do you change the line on a Stihl FS 56?
More videos on YouTube Depress the two tabs on the side of the cutting head to release the cover. Remove the old spool and clean grass, dirt and debris from the inside of the cutting head. As you hold the new spool, guide each line into the holes on the side of the trimmer head and push the spool into place.
Is Thicker trimmer line better?
Trimmer line comes in many different line weights and diameters. A larger diameter will increase your cutting power and durability against thicker grasses and weeds. A lighter weight should be used on areas where there are a minimum of weeds.
What size line does a Stihl AutoCut 25 2 use?
For example, the Stihl AutoCut 25-2 requires either a . 08-inch line or a . 095-inch line.
How much line does a Stihl FS 56 RC take?
It uses dual . 095-inch cutting lines. This Stihl 27.2-cc, gasoline-powered string trimmer has a straight shaft and weighs 12.5 lbs. It uses dual .
What size line does a Stihl FS 50 use?
SPECIFICATIONS Engine Displacement : 27.2 cc Line Diameter : 0.08 in Line Type : Nylon Material : Polymer Sound Level : 108 dB.
What size trimmer line is best?
For light work, such as trimming grass, 0.065″-0.085″ should be sufficient. For thicker grass and weeds, a line in the 0.085″-0.110″ range will get the job done, and for thicker underbrush, anything thicker than 0.110″ will work.
