Here is a brief synopsis of how to operate a Tommy liftgate:
- Read the operator’s manual. ...
- Before operating liftgate with a load, operate it empty through its full range up-and-down as a pre-check to verify it is in position to provide a good landing area for the freight.
- Before loading the freight, place the proper devices were wheels under it for safe handling. ...
- Position the load, using the chocks under the wheels to prevent it from rolling.
How do I operate a Tommy liftgate?
A liftgate should only be used by those with the proper training and familiarity with the device. Here is a brief synopsis of how to operate a Tommy liftgate: Read the operator’s manual. Follow all the directions provided. Pay attention to and follow all safety warning labels.
What kind of liftgates does Tom Tom offer?
Tommy Gate offers a full line of liftgates for any personal, commercial, or industrial application. Depending on your particular cargo-handling needs and your vehicle, certain liftgates may be more suitable than others. Browse our different products to learn more.
Where can I buy a liftgate?
Tommy Gate offers a full line of liftgates for any personal, commercial, or industrial application. Depending on your particular cargo-handling needs and your vehicle, certain liftgates may be more suitable than others. Browse our different products to learn more. When you're ready to buy, find the dealer nearest you.
Does Tommy Gate offer a rear camera&sensor bar?
Tommy Gate offers a Rear Camera & Sensor Bar for the most popular (and recent) pickup models and will be adding applications for newer pickup models as they are released. Most pickup truck owners require the use of a tow hitch. Some liftgate installations are compatible with factory-installed hitches and some are not .
See more
How do you activate the Tommy Gate lift gate?
To activate the control, press the "LIFTGATE ACTIVATED" hidden switch twice within one second (located under the Tommy Gate logo). You should see the red "LIFTGATE ACTIVATED" light when the control is activated. To lower the platform, push the control toggle switch down.
Why wont my lift gate go up?
Your Lift gate won't lift off the ground Lift gates are run by a motor/pump and when they malfunction, it could be due to issues involving the motor/pump itself. Your lift gate may have a problem with a defective switch or a broken wiring connection.
How do lift gates work?
0:372:11How to Operate Truck Lift Gate - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are three buttons that operate the lift the top button makes lift go up the bottom buttonMoreThere are three buttons that operate the lift the top button makes lift go up the bottom button makes lift go down pressing the top and middle button together will tilt the lift.
How does a tuck under lift gate work?
A tuck-under lift gate is meant to stay out of your way until you need to engage it. As the name implies, a tuck-under lift gate tucks right under and away from the cargo entrance, allowing for you to back up vehicles to loading docks without a lift gate getting in the way.
How do I turn on my power liftgate?
OPEN YOUR HANDS-FREE POWER LIFTGATE. With your key fob in your hand, pocket or bag, approach the liftgate. The logo projection will automatically turn on as you get within 6 feet of the rear of your vehicle. Kick straight over the logo, or at the sensor for older vehicles.
What kind of fluid does a Tommy Gate use?
With the liftgate platform at the bottom of its travel, the fluid should be two-thirds full. BE SURE THE CYLINDER IS COMPLETELY COLLAPSED. Add Tommy Gate Winter Grade, ISO grade, 32 hydraulic, or Dexron III/Mercon ATF if needed.
How do you unfold a liftgate?
Unhook these before using the liftgate. Lower the Liftgate: Standing to the side of the truck, press the control button to lower the platform. Continue until it touches the ground. Unfold the Platform: Using the built-in handhold, unfold the flip-over section of the platform.
Can you manually open a power liftgate?
When operating the power liftgate after you have programmed a lower height than fully open, you can fully open the liftgate by manually pushing it upward to the maximum open position.
What is a gate lift?
Liftgate delivery service involves a truck affixed with a piece of hydraulic or electric equipment that is installed on the back of a truck, enabling freight to be lifted several feet from off the ground to the tailgate of the truck, or lowered from the truck's tailgate to the ground.
How much weight can a lift gate hold?
Most liftgates can handle freight that is equal to or less than 96 inches wide, and 48 inches deep. This means that standard-sized pallets can easily be used with a liftgate. The weight limit on a standard liftgate is 2500 lbs.
What cars have hands free liftgate?
Top Sports Utility Vehicles with a Hands-free Power LiftgateToyota. Sienna, Highlander, and Venza are the three 2021 Toyota models with hands-free rear power liftgate features at higher trim levels. ... Mazda. The 2021 Mazda CX-9 has a hands-free power liftgate at higher trims. ... Mercedes-Benz. ... Kia. ... Subaru. ... Chevrolet. ... Honda.
What is the difference between tailgate and liftgate?
You lift a liftgate upwards, while you lower a tailgate. A tailgate is lowered for loading or unloading. Tailgates are found on pickup trucks and on a few SUV's. Liftgates are very common on SUVs, crossovers, and hatchback sedans.
Does a liftgate have a fuse?
Your vehicle should have a fuse that controls the power to the lift gate. If the gate suddenly stops working entirely, it is possible you have a blown fuse. Simply replacing the fuse in question will restore normal power.
Can you manually open a power liftgate?
When operating the power liftgate after you have programmed a lower height than fully open, you can fully open the liftgate by manually pushing it upward to the maximum open position.
How do you bleed a hydraulic lift gate?
0:191:4590 Second Know How: Filling and Bleeding a 2 Post Lift - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace a 5/8 inch wrench on the bleeder screw and place a rag on top to catch excess hydraulic fluidMorePlace a 5/8 inch wrench on the bleeder screw and place a rag on top to catch excess hydraulic fluid slowly open the bleeder leave the bleeder open until all the air has escaped.
How do you reset the tailgate on a Jeep Grand Cherokee?
How do I reset my liftgate? Remove the key from the ignition and wait for 15 seconds. Press and hold the liftgate release button located on the driver's side of the liftgate while you insert your key into the ignition.
What is a Tommy Gate cantilever?
The Tommy Gate Cantilever Series is a modern hydraulic lift that is specifically designed to operate seamlessly with commercial vans.
What is a G2 liftgate?
A dual-cylinder, parallel-arm design liftgate. The G2 Series is versatile, popular, and modern.
Does Tommy Gate have liftgates?
Tommy Gate offers a full line of liftgates for any personal, commercial, or industrial application. Depending on your particular cargo-handling needs and your vehicle, certain liftgates may be more suitable than others. Browse our different products to learn more. When you're ready to buy, find the dealer nearest you.
Why is it called Tommy Gate?
Woodbine Manufacturing Company was founded in 1965, in Woodbine, Iowa by Delbert “Bus” Brown. Working alone, Bus designed and constructed the original Tommy Gate Hydraulic Lift, which he named after his son.
What is the difference between tailgate and liftgate?
The Difference Between A Liftgate And A Tailgate – You lift a liftgate upwards, while you lower a tailgate. A tailgate is lowered for loading or unloading. Tailgates are found on pickup trucks and on a few SUV’s. Liftgates are very common on SUVs, crossovers, and hatchback sedans.
Are power liftgates worth it?
From a convenience standpoint, power liftgates are extremely helpful if you access your vehicle’s cargo area frequently. Additionally, the ability to open the hatch or tailgate without needing to put down whatever you’re carrying can be a huge plus.
Can you put a hitch on a truck with a lift gate?
We have many hitch options for a truck that has a lift gate, but very few of them are a simple bolt on custom application. Because the locations for attaching lift gates vary, you will need to use a weld on option like the Class V Universal Weld-on Receiver Hitch # 15903.
Can you add a power liftgate to a SUV?
Power liftgates are installable on SUVs, CUVs, and vans —vehicles that have back doors that operate in an up-and-down, hinge-like motion.
What is hands free power liftgate?
Available Hands-Free Power Liftgate with logo projection and programmable height, if equipped, lets you open and close your liftgate with a simple kicking motion below the bumper. On some vehicles, an illuminated logo projection will appear on the ground to show you where to kick.
How does Tommy Gate work?
Your Tommy Gate is connected to your vehicle battery. The vehicle battery powers a motor, coupled to ahydraulic pump. This motor and pump combination is called a power unit. Flow from the pump extends acylinder to provide tension to the lift chains that lift the gate platform. A check valve blocks return flowfrom the cylinder to the pump and a pressure relief valve prevents the gate from being overloaded. The gateplatform is lowered by gravity after the "lower" solenoid valve is activated and opened at the pump. !Warning: Liftgate is not to be used as a scale. Liftgate may lift more than its rated capacity. Be aware of how much is being lifted and never exceed the rated capacity of the liftgate. Be aware of how much is being hauled and never exceed the rated capacity of the vehicle.
What is the number to Tommy Gate?
at 712-847-8000. authorized distributor. If additional assistance is needed, call Tommy Gate Use only Tommy Gate Do not modify lift or its safety service parts installed by an
Why is my liftgate low voltage?
Caution: Continuing to operate the the liftgate in the "Low Voltage" condition may result in failure of electrical components in the power unit. The low voltage condition may be caused by a weak battery, loose or corroded connections, improper ground, or bad electrical cables. This condition may be corrected by just starting the vehicle or replacing the battery. Lift Chains and Pulleys in Mainframe Pump, Motor, and Cylinder in Mainframe Slider with Roller Wheels The terms used to describe parts of the railgate in this manual can be found in (Figure 1). Control Shield Tie Down Rings
What causes premature failure of lift chains?
cause premature failure of lift chains. Failure to lubricate properly could Use clean, high-quality, nondetergent,
Can a liftgate exceed its rated capacity?
never exceed the rated Be aware of how much is being hauled and capacity of the vehicle. capacity of the liftgate. is being lifted and never Be aware of how much exceed the rated used as a scale. Liftgate is not to be Liftgate may lift more than its rated capacity. Before removing box cover do the following: 1) Lower platform to ground or close and latch. 2) Disconnect positive battery cable(s).
Can you ride on the platform on a Tommy Gate?
Tommy Gate does not recommend that you ride on the platform while operating the liftgate. However, if you must ride in order to safely move your cargo, follow the safety precautions listed in the owner's manual. Center and secure load on platform side to side and front to back. Stand in a safe position away from moving parts while the liftgate is in use.
Can you show children how to operate the railgate?
Never show children or unauthorized personnel how to operate the railgate.
