Lighting is easy with the Rapid Fire Chimney Starter:
- Measure out the amount of charcoal specified in the recipe using the briquette scoop (which was included free with your Weber charcoal barbecue) and pour into the Chimney Starter.
- Light three lighter cubes on the coal grate.
- Position the Chimney Starter over the cubes.
- Wait until flames appear at the top of the Chimney Starter. This is a sign that the coals are glowing.
Full Answer
Can the chimney starter be used with a Weber Performer?
For those of you with a Weber Performer (with gas assisted electronic ignition) the Chimney Starter can be used in conjunction with the Touch and Go™ electronic ignition system to get the coals going even faster.
How do you use a chimney starter on a grill?
Fill the chimney starter according to your grilling needs (see chart below). Place two lighter cubes on the charcoal grate and then place a chimney starter over the lighter cubes and ignite through the holes in the bottom.
What is the purpose of the swinging handle on a chimney?
The swinging handle is there to help you lift the chimney starter and safely aim the coals just where you want them. Once the burning coals have been arranged (indirect or direct), set the cooking grate back into place, and put the lid on.
How long does it take to pre heat a Weber grill?
Once the burning coals have been arranged to your liking, set the cooking grate back into place, put the lid on, and once the grill has heated up sufficiently you’ll be all set to cook. It should take about 10-15 minutes to reach 500-550°F, at which point the grill is considered pre-heated.
What is a rapidfire chimney starter?
How to use a circle medium grill?
How long does it take to cook a charcoal grill?
Can you use newspaper to burn coal?
Can you put chimney starter on a grill?
Does Rapidfire chimney starter burn faster?
See 3 more
About this website
How do you use a Weber BBQ chimney?
Set the lighter cubes on the charcoal grate and light them. Then you'll need to set the Chimney Starter directly on top of the lighter cubes, on the charcoal grate. The fire from the cubes will begin burning the charcoal and the flames will grow upwards from there.
How do you use a Weber rapid fire chimney?
To use your Rapidfire Chimney Starter, simply place it over a lighter cube or crumpled newspaper, light your preferred fire starter, and you're well on your way to burning red-hot briquettes—in less time and completely lighter fluid free.
What does the top vent on a Weber do?
The vent on the bottom of the basin controls how much oxygen gets inside the grill, while the vent on the top determines how much heat exits the grill. Even when you're grilling with the lid off, you need to think about the bottom vent.
How do you use a chimney?
0:161:41How to Use a Charcoal Chimney - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a long step match or utility lighter and light the newspaper in multiple spots throughout theMoreTake a long step match or utility lighter and light the newspaper in multiple spots throughout the vents around the bottom of the chimney the burning newspaper will then catch the charcoal on fire.
How do I know when my charcoal chimney is ready?
Allow Coals to Burn Let the charcoal chimney get your coals ready for about 15 to 20 minutes. Check regularly to make sure you see a little smoke. Your coals are ready to use when they're about 50 percent burned and white ash forms around the edges.
How long should coals burn before cooking?
Depending on how much charcoal you're lighting, make sure to set 15-20 minutes aside to let your charcoal properly heat up before pouring it into the base of your grill.
Should Weber vents be open or closed?
Most Weber barbecues have vents on both the lid and the bottom bowl. If you are a beginner, leave both the top and bottom vents fully open. As you become more experienced, try permanently leaving the bottom vent fully open and using the lid vent to control the temperature.
Do I leave grill vent open or closed?
For extra air flow, keep the vents open when lighting and preheating the grill. If it seems like your food is cooking too quickly, try closing the vents a bit to lower the temperature. Or if you want to raise the heat, try opening the vents a bit.
Do you grill with the vent open?
Grilling on high heat is the best way to get that perfect sear on the outside while keeping the inside juicy. To increase the temperature, open the vents to let in more oxygen. To decrease the temperature, close the vents — but not completely, or the fire will go out.
How do you start a chimney?
OverviewStart with a safe fireplace and chimney with a spark screen and a grate.Gather the three essential fuels to prepare for ignition.Open the flue damper.Set up logs, kindling, and tinder using the upside-down fire method.Light the kindling; be on the watch for smoke spillage.More items...•
How do you start a BBQ chimney?
0:080:32How to Use a Charcoal Chimney Starter - YouTubeYouTubeStart of suggested clipEnd of suggested clipRed. Now just pour these over the unlit coals in your komodo. And you have a perfect start for lowMoreRed. Now just pour these over the unlit coals in your komodo. And you have a perfect start for low and slow cooking.
How do you use the Weber chimney starter with newspaper?
0:031:58How to Light Charcoal, Weber Grill, Newspaper only, No Lighter FluidYouTubeStart of suggested clipEnd of suggested clipIt's very easy to use put it upside down on your grill with the vents open and put two pieces ofMoreIt's very easy to use put it upside down on your grill with the vents open and put two pieces of newspaper on the bottom of the cuff of the chimney.
How do you use a Weber lighter cube with a chimney?
0:000:29How To Use Weber Lighter Cubes | Weber Grills - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd my starter cubes fill the chimney all the way to the top with briquettes place the cubes on theMoreAnd my starter cubes fill the chimney all the way to the top with briquettes place the cubes on the fuel grate. And light then place the chimney back over the cubes they're going to burn for about 15.
How does a charcoal chimney starter work?
The chimney starter is used by placing kindling—typically paper—under the grate and charcoal over it. When the kindling is lit, it ignites the charcoal and creates a draft. Since the coals are held together, radiation heats adjacent coals, and convection heats coals higher in the stack.
How do you start a fire on a Weber grill?
0:528:01How to Manage a Fire in a Weber Kettle for Beginners - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we'll get eight to twelve. Briquettes. Going so i've just got ten briquettes here in ourMoreAnd we'll get eight to twelve. Briquettes. Going so i've just got ten briquettes here in our charcoal chimney. And i'll place them straight over these fire lighters.
How do you use a lighter Cube without a chimney?
0:345:03How To Light Charcoal Without Fluid or Chimney - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd now that we got the fire going. Let's go ahead and place the charcoal. On top of the fire. AndMoreAnd now that we got the fire going. Let's go ahead and place the charcoal. On top of the fire. And remember if you experience any wind you can use the BBQ.
How to use a Weber Chimney Starter - YouTube
A Weber Chimney starter is a easy way to light your fuel prior to a BBQ. It also takes less time to ensure your briquettes are ready to cook with - you can ...
How Tpo Use A Weber Chimney Starter - The Easy Way! - Better Grills
By using this method you can also shut the hood of your grill and use your air vents to control the temperature for low and slow cooking.. I hope this small explanation on how to use the Weber Chimney starter and showed how easy it is to use it and how fast your charcoal will be ready to use.
Charcoal Chimney – Tips And Tricks On Using It
Charcoal chimneys, also called chimney starters, are an inexpensive addition to your charcoal grilling toolkit.These simple devices can remove a lot of the hassle of getting a good charcoal fire started. Read on to find out what they can do for you, and how to use one properly.
How long does it take to get a Weber charcoal chimney ready?
That is all you have to do to get your charcoal ready to use on your grill. This is the Weber Chimney in action and getting my charcoal ready in about 10 minutes. This is basically the whole process to get your charcoal started with the Weber charcoal chimney.
How to use charcoal on a grill?
There is a roster down in the chimney starter. You put charcoal at the top and news paper at the bottom. Fill the chimney with charcoal. Crumble the newspaper at the bottom. Light the news paper. Wait till charcoal is ready. That is all you have to do to get your charcoal ready to use on your grill.
Can you use a hood on a grill to control the temperature?
By using this method you can also shut the hood of your grill and use your air vents to control the temperature for low and slow cooking.
How to ignite a charcoal grill with a chimney starter?
Fill the chimney starter according to your grilling needs (see chart below). Place two lighter cubes on the charcoal grate and then place a chimney starter over the lighter cubes and ignite through the holes in the bottom.
What is a swinging handle on a chimney?
The swinging handle is there to help you lift the chimney starter and safely aim the coals just where you want them. Once the burning coals have been arranged (indirect or direct), set the cooking grate back into place, and put the lid on.
How long does it take to light a charcoal grill?
Depending on weather conditions, in about 15 minutes the coals should be sufficiently lit to pour into the grill.
How to clean ash from a bowl?
Empty any ash in the bottom of the bowl into the ash catcher by sliding the One-Touch cleaning system from side to side, sweeping the ashes through the bottom vents. Slide the damper blades on the bottom of bowl to the fully open position. Remove the cooking grate.
What is the best way to light charcoal?
The chimney starter is the easiest and fastest method for lighted any kind of charcoal. Getting started is really easy! First, here is what you need. Weber Briquettes. Chimney Starter or Compact Chimney Starter. Lighter Cubes. Now, let's fire up the chimney starter. Open the damper fully on the lid of your grill and place the lid on the side ...
How long does it take for charcoal to burn on a grill?
The fire from the cubes will begin burning the charcoal and the flames will grow upwards from there. Depending on weather conditions, in about 10 to 15 minutes the coals should be sufficiently lit to pour into the grill. You’ll know the coals are ready when the ones on top have started to turn a bit gray with ash.
How long does it take to cook a grilled chicken on a gas grill?
It should take about 10 to 15 minutes to reach 500 to 550 F, at which point the grill is considered pre-heated.
Can you light a chimney starter on a charcoal grate?
Set the lighter cubes on the charcoal grate and light them. * Make sure to always light your chimney starter on a charcoal grate. It shouldn't be lit on a concrete surface, as moisture trapped in the concrete can heat up and expand rapidly, causing it to crack.
Can you use charcoal on a chimney starter?
Then, fill your Chimney Starter all the way to the top with charcoal (you can use less if you aren’t cooking as much food).
Can you use newspaper to start a chimney?
Using a chimney starter is very easy. You can use either newspaper or lighter cubes to get the coals going. Newspaper works great, but nothing beats a lighter cube. Lighter cubes even burn in the rain! We also make a compact chimney starter that can be used with our smaller model grills. It makes a perfect addition to anyone’s list ...
Can a Weber chimney starter be used with a Weber performer?
For those of you with a Weber Performer (with gas assisted electronic ignition) the Chimney Starter can be used with the Touch and Go™ electronic ignition system to get the coals going even faster. To do so, all the previously mentioned instructions apply, just make sure the Chimney Starter is placed directly above the burner tube, ...
What is a rapidfire chimney starter?
It’s basically a hollow metal cylinder with holes on both ends, a small wire grate inside, and a set of handles to hold the starter and to pour the charcoal. Using one couldn’t be easier.
How to use a circle medium grill?
arrow. circle-medium. arrow. arrow. First, you’ll need to take out the cooking grate from your grill. Then, fill your Chimney Starter all the way to the top with charcoal (you can use less if you aren’t cooking as much food). Set the lighter cubes on the charcoal grate and light them.
How long does it take to cook a charcoal grill?
It should take about 10-15 minutes to reach 500-550°F, at which point the grill is considered pre-heated.
Can you use newspaper to burn coal?
You can use either newspaper or lighter cubes to get the coals going. Newspaper works great, but nothing beats a lighter cube. They even work in the rain! I prefer to use two at a time to get the coals burning even faster.
Can you put chimney starter on a grill?
Also, remember to put that Chimney Starter somewhere safe once you’ve poured the coals into the grill, you don’t want pets or guests bumping into it while it’s still hot.
Does Rapidfire chimney starter burn faster?
Simply put, nothing gets coals burning faster and more evenly than a Rapidfire Chimney Starter. I’ve gotten a real kick out of watching my friend’s faces when they’ve seen me use it in front of them for the first time, and they always tell me that they are going to get one before the next time they grill. As for myself, there hasn’t been a single day when I’ve missed using lighter fluid.
