PEX One Hand Pinch Clamp Fastening Tool
- After you have cut your PEX and placed the pinch clamp ring over it and attached the fitting, place the jaws of your clamp fastening tool around the nub of ...
- The clamp now needs to be ratcheted 7 times until the LED light on your tool turning on. ...
- Now, you have to rotate the tool’s release lever at the side of your Apollo tool to release it.
What is the apollopex one hand pinch clamp tool?
The ApolloPEX One Hand Pinch Clamp Tool provides extreme versatility. It is designed for the creating secure stainless steel pinch clamp connections in combi... AboutPressCopyrightContact usCreatorsAdvertiseDevelopersTermsPrivacyPolicy & SafetyHow YouTube worksTest new features
How do you use a PEX pinch clamp?
Slip PEX pinch clamp over tubing and insert fitting. Place pinch clamp 1/8” below edge of tubing. 3. Place PEX pinch clamp nub between tool jaws and ratchet the clamp until the PEX Pinch Clamp Tool auto-releases. This action will assure that the PEX pinch clamp is fully engaged. 4.
What kind of tool do you use to pinch PEX?
The Apollo PEX Pinch Clamp Fastening Tool fastens 3/8″-3/4″ stainless steel pinch clamps. Use with Apollo PEX Pinch Clamps or Pro Pinch Clamps. Apollo’s One Hand PEX Pinch Clamp Fastening Tool provides one-hand ratcheting action to pinch PEX clamps.
How do I calibrate Apollo PEX tools?
Apollo PEX tools are pre-calibrated for up to 10,000 uses. After repeated use of this tool, it may require calibration. A calibration gauge and bar is provided with the tool. 69PTKG1096 1 1. Insert the Calibration Bar into the tool as shown. Ratchet the Pinch Tool to the closed position (tool jaws should be biting into the bar). 22.
How do you use Apollo pinch clamps?
0:071:34ApolloPEX Pinch Clamp Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipPosition the open jaws of the tool over the knuckle of the pinch clamp and squeeze the tool handlesMorePosition the open jaws of the tool over the knuckle of the pinch clamp and squeeze the tool handles taking advantage of the patented ratcheting action to pinch the clamp into.
How do you install Apollo PEX pro pinch clamps?
0:181:41ApolloPEX One Hand PEX Pinch Clamp Tool - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the fitting has been inserted fully position the properly sized pinch clamp approximately 1/8MoreOnce the fitting has been inserted fully position the properly sized pinch clamp approximately 1/8 to 1/4 of an inch away from the end of the tube around the fitting.
How do you pinch pinch clamps?
0:414:04Procedure 2203: Pinch-On Clamps - YouTubeYouTubeStart of suggested clipEnd of suggested clipInsert the fitting fully into the hose. Slide the clamp over the fitting shank. Position the clampMoreInsert the fitting fully into the hose. Slide the clamp over the fitting shank. Position the clamp in this case the correct position is midway between the mark on the hose. And the hose end.
How do you use Apollo PEX?
0:535:26Apollo PEX-B - How To Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipSlide the crimp ring over the end of the tubing. And insert the fitting. Move the crimp ring untilMoreSlide the crimp ring over the end of the tubing. And insert the fitting. Move the crimp ring until it's approximately an eighth of an inch to a quarter of an inch from the end.
How do you install PEX pinch clamps?
0:021:21How to Make PEX Clamp Connections - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp take the ring and slide it over the tubing insert the clamp fitting. And place the jaws of theMoreUp take the ring and slide it over the tubing insert the clamp fitting. And place the jaws of the clamp tool over the small tab on the outside of the ring. Squeeze. The tab to tighten the ring.
Which way does arrow go on PEX pro pinch clamps?
The arrow is to point toward the pex piping and not the metal pex fitting. So therefore the water flow may go either way. Just point the arrow toward the flexible pex piping at each joint. These instructions are also on the packaging.
What are the arrows on PEX clamps?
A: These plastic tabs create the perfect offset between the end of pex tube and clamp, it's the reason they are there. The arrow is meant to point away from end of tubing because the other side has the longer gap setting tab.
How do you use a PEX pinch clamp without tools?
1:413:14Shark bite clamps and How to crimp pex connections without crimp tool!YouTubeStart of suggested clipEnd of suggested clipAnd as you can see work perfectly so if you want to do this without buying the hundred dollar toolMoreAnd as you can see work perfectly so if you want to do this without buying the hundred dollar tool and just use a pair of diagonal cutters to crimp into this little guy here.
How do you adjust a PEX clamp tool?
Adjustment Screw Use a standard screwdriver to loosen the locking screw. Turn the tool over and locate the adjustment dial. Turn the adjustment dial right or left as needed to change the size of the jaw gap. When adjustment is complete, tighten the locking screw.
Is Apollo PEX type A or B?
Apollo offers PEX-A (Expansion PEX) and PEX-B tubing. PEX-A tubing (Expansion PEX) is produced using the Peroxide or Engel method. Molecules of HDPE polymer are cross-linked during the extrusion process. PEX-B tubing is produced using the Silane or moisture-cured method.
What is an Apollo fitting?
0:113:08Apollo PEX Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipFit is an innovative line of pipe fittings that can be used with pecs copper. And SI PVC pipe fluffyMoreFit is an innovative line of pipe fittings that can be used with pecs copper. And SI PVC pipe fluffy fittings can be installed without tools glues or soldering.
Are sharkbite and Apollo interchangeable?
Apollo manufactures both Pex-A and Pex-B. If your supplier is selling Sharkbite fittings, all sharkbite fittings will work on all three types of Pex. I have only seen Apollo expansion fittings and all Pex expansion fittings will only work with Pex-A due to the I.D. If you have Uponor, you have Pex-A tubing.
What is a clamp on PEX pipe?
Clamps are normal tools for holding something tightly together; however, the PEX pipe has a specialized tool for clamping purposes. If you do not have the necessary tool, you can go to the market and collect metallic clamp rings of various sizes. The size, along with the thickness or thinness does have an impact.
What is a crimp tool?
Understand the basics first; the crimping tool is for cutting or pressing purposes. The crimp has a set of teeth on its edges that you can use for cutting, pulling, or pressing. Keep the image of the teeth or edges in your mind, and you will understand the crimp that you are going to customize for the home tasks in the future.
What tools do plumbers use?
The way it changed the business competition also changed the tools that were required. While professional plumbers use brand new PEX crimping or cinching tools , you or any other DIY guy may not find that suitable to work with.
Can you use rubber bands on ring clamps?
Strong metal wire can also be used and improvised into ring clamps. You must have seen professional plumbers use rubber bands to hold something tight, though the improvised clamps are just a temporary option and not a durable solution.
Is improvised tool permanent?
Conclusion. That said, the tools that you improvised are not a permanent option. It clarifies your concepts regarding the tools, but the best choice is the real thing. Durability by handmade tools is luck, and many professionals, even though they can improvise, claim to go for the real thing.
Can you use glue to crimp metal?
Use any type of glue or adhesive material so that the metal wire remains in place and is not disturbed during the crimping process. However, we strongly recommend using crimp rings as this kind of metal wire won’t give you a permanent solution. The crimping can also be achieved with tools that have teeth to hold on to.
