To vape with ARIZER Extreme Q Forced-Air, follow this process:
- Install the ARIZER Extreme Q Vaporizers plug.
- To adjust the temperature, use the LCD display or the remote control.
- Give the machine 15 minutes to warm up.
- Grind your herbal concoction.
- Slide the mini whip into place to fasten it to the bag.
Do the arizer air vaporizers come with screens?
A: Arizer, the maker of the products, does not supply screens with their Air (or Solo) portable vaporizers. These devices are designed to be used with medium to coarsely ground dry herbs.
How do I Turn my arizer air on?
A: To turn your Air vaporizer on just press and hold the center of the up and down buttons for a few secs. Q: How to enable and disable the sound or beep on my Arizer Air?
Can I put essential oils in my arizer portable vaporizer?
A: The Arizer Portable Vaporizers are suitable for dry herbs use only. However, it comes with a potpourri dish in the kit. You can put a couple of drops of essential oil in the glass bowl, heat it up and enjoy the aroma. Q: Where can I find the Serial Number of this device?
Which stems can I use with the arizer air?
You can use the Arizer Solo straight and curved glass stems with the Arizer Air (long straight and curved stems are not included in the Arizer Air kit). Q: How much herbs can I put into the Arizer Air chamber?
How do you use a arizer vaporizer?
Simply press one of the three control panel buttons and it will start heating up to the last used temperature. To change the target temperature, press the plus (+) or minus (-) buttons. A short press adjusts it in 1-degree increments, while a long press adjusts it in 10-degree increments.
How do you smoke an arizer?
How to use your new Arizer Solo Vaporizer!Step 1: Turn on the Solo. To turn on the unit press both the up and down buttons for a few seconds. ... Step 2: First Use Instructions. ... Step 3: Select a Temperature. ... Step 4: Pack the Solo. ... Step 5: Begin Use. ... Step 6: End Session.
What is the best way to use the arizer solo 2?
Arizer Solo 2 Tips & TricksLoading. ... Tamp down for taste. ... Heat soak for bigger clouds. ... Pack less, draw more. ... Stop stirring. ... Keep it clean. ... Customize.
How do you use arizer solo 2 for the first time?
– Before the first use, do the so-called burn-off. Switch on the device (don't install the glass mouthpiece in it yet), set the temperature at the highest possible level and let the vaporizer work like this for about 15 minutes.
How many hits can you get of a arizer solo 2?
Depending on the heat and herb used, I'll usually get 6-12 good draws per session. On the higher end if I'm flavor chasing with lower temps, and less if I'm cloud chasing with higher temps. It is also very effective for micro-dosing, the stem doesn't have to be full.
Can you use shake in a dry herb vaporizer?
Use It With a Dry Herb Vaporizer Vaporizing the shake removes the element of direct heat. The flavor and cannabinoids will withstand a vaporizer much better. If you don't have a dry herb vaporizer, don't go out and buy one just to use for shake.
What is the best dry herb vaporizer 2022?
The 12 Best Weed Vaporizers to Buy in 2022Most Popular Vape. PAX 3 PAX Labs. ... Best Overall Vaporizer. Elite Vaporizer G Pen. ... Best Budget Vaporizer. APX 3 Pulsar. ... Smartest Vaporizer. Era Pro PAX Labs. ... Most Covert Vaporizer. MIQRO DaVinci. ... Best Mid-Tier Vaporizer. Starry V3 X-Max. ... Best Pro-Level Vaporizer. ... Most Stylish Vaporizer.More items...•
Is arizer solo 2 a good vape?
Today we're taking a peek at the Arizer Solo 2, which is a portable vaporizer made by Arizer. It's a much improved version of the original Solo and is definitely worth checking out. Update for 2021: We still think the Solo 2 is one of the best vaporizers available, especially for the price.
Does arizer solo 2 smell?
Does the Arizer Solo 2 smell? Vaporizers can smell when they heat up, and any used vaporizer can smell until cleaned. The nice thing about the Solo 2 vaporizer is the smelly part is easy to clean. All the extracts gather in the separate glass stems, while the base unit stays relatively mess free.
How do you use arizer solo 2 vaporizer?
2:243:50Arizer Solo 2 : Unboxing & How to use - YouTubeYouTubeStart of suggested clipEnd of suggested clipFace then you'll just use the up and down buttons to select the temperature of your choice. FurtherMoreFace then you'll just use the up and down buttons to select the temperature of your choice. Further to temperature control on the unit.
How do you set up Arizer?
1:233:46Arizer Air Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply put the botanical inside your glass to feed your stem. Then hold it upside down. Turn theMoreSimply put the botanical inside your glass to feed your stem. Then hold it upside down. Turn the unit upside down. And place it on top of the glass diffuser stem.
How does the arizer solo 2 work?
The Arizer Solo 2's heating system expertly combines methods of conduction and convection. The hybrid system allows for even heating of your dry herbs, contributing to awesome vapor quality in every session. It boasts the speed of convection heating with the power of conduction heating.
What is the best way to use the arizer Extreme Q?
How to Use ARIZER Extreme QPlug in the Extreme Q.Use the remote or the LCD screen to set the temperature.Allow the unit to heat up for 15 minutes.Use a herb grinder for your herbal blend.Place the blend in the Cyclone Bowl and put the bowl on the warming unit.More items...
What temperature should I set my arizer Extreme Q?
Temperature on the Extreme Q can be set anywhere between 50° C – 260° C (122° F – 500° F) which gives users with a very wide range for vaporizing dry herbs. For best performance it is recommended to set the Extreme Q around 180 - 220°C.
How do you elbow pack arizer?
Elbow Pack – how to use much less material The idea is to leave the Cyclone Bowl empty and load the herb into a small screen located in a glass elbow in the silicone tube. The herb should be very well-ground and tamped down well enough to stay inside the screen when you turn it upside down.
How do you use arizer Extreme Q?
1:0210:02Arizer Extreme Q Vaporizer Review and Tutorial - Vaporizer WizardYouTubeStart of suggested clipEnd of suggested clipPress the M in the upper left corner to get to the menu here. You can adjust the sound. You can alsoMorePress the M in the upper left corner to get to the menu here. You can adjust the sound. You can also adjust the sleep timer which ranges from 30 minutes to 4.
What's in the box
The number of parts and accessories may be a bit overwhelming but Arizer included everything you could need for your Extreme Q, and more.
Multiple controls
While you can control everything from the onboard display, Arizer went a step further and included a remote for your desktop vape. You can preheat it with specific temperatures, or with the remote’s preset temps from all the way across the room, change fan speeds, set the session timer, and even adjust the light settings.
Heat it up
Press the bottom left power button on the unit to fire up the heater. Use the up and down buttons to the right of the display to set the temperature to 390° F (199° C) for this first session. If you’re looking for thicker hits out of the gate, start out at 420° F (215° C).
Medium grind
The Extreme Q is pretty flexible when it comes to grinding your herbs, but we suggest a medium consistency for this session. Grind up some herbs and fill the cyclone bowl loosely, anywhere from a quarter to three quarters of the way up to the bottom of the black protective coating. Anymore than that, and you won’t get a consistent roast.
Hit the whip
The whip is great for long, drawn out sessions. Connect the end with the glass adapter to the bowl, and draw just hard enough to move the herbs around. Shoot for a good 10 to 15 second draw. The cyclone bowl is designed to toss your herbs around as you draw, to reduce stirring, but as with any convection vape, stirring can help.
Blow up a bag
The Extreme Q is one of the few desktop vapes that lets you choose between a whip or a bag. To blow up a bag, pack the bowl as before, attach the mini whip to the bowl, then plug the bag’s mouthpiece into the mini whip. Turn the fan on, either level two or three, and fill up the bag.
Cleanup
After you’re done with your session, turn the heater off and clear out the bowl and whip of any leftovers. It’s easier to do this while it’s still warm, but be careful not to burn yourself. The black protective coating will be warm to the touch, but the glass below will stay plenty hot for a bit.
Charging
While the Solo II may come out of the box with some amount of charge on it, we recommend fully charging the battery before your first use. This could take over four hours the first time, but won’t take as long on subsequent charges.
Burnoff
Once the battery is charged, it’s a good idea to run a burnoff cycle with the Solo II, to make sure there aren’t any leftover residues from manufacturing or shipping. With an empty oven, turn the power on, set the temperature to 428° F (220 ° C), and let it run until it shuts off on its own, which should take 10 minutes by default.
Controls
Hold down the middle and top buttons to turn on the Solo II. You can use the up and down arrows to set the temperature, which will initiate the heater, and the heating icon will turn on. The small numbers on the bottom are the target temperature, and the upper numbers are the current temperature.
Advanced settings menu
The Solo II has a number of more specific settings to customize your sessions. Press the center Menu button to enter the settings menu, then use the up and down arrows to change the settings. Click the center menu button again to cycle through the menu options, or don’t press anything for a few seconds to go back to regular operating mode.
Coarse grind
When grinding for the Solo II, we recommend a medium to coarse grind, or none at all. The Solo II is more than happy to handle even full chunks of herb without any grinding, but if it’s too fine, some of the bits can pull through the screen and into your mouth.
Packing
To load the Solo II, plunge the open end of one of the stems into your ground herbs. Gently tamp it down, just enough to stay in place, so that the herbs don’t fall out mid-session. You want to leave about one millimeter of space at the end of the stem, so you don’t singe any materials that sit too close to the heater.
Your first session
Before you start heating the Solo II, you’ll want to insert the glass stem. With the herbs facing towards the oven, carefully wiggle the stem into the top of the vape, just enough so it fits snugly inside. We recommend starting out at 390° F, or 199° C the first time around.
How to use the Arizer Extreme Q Vaporizer
Hello, everyone! This is Milad for Toronto V TV. Let’s have a look at the Arizer Extreme Q Vaporizer. This is another unit that I personally recommend, and it’s assembled right here in Canada, and at its price point, and even far above, probably the best home vaporizer money can buy.
Video Transcript
Hello, everyone! This is Milad for Toronto V TV. Let’s have a look at the Arizer Extreme Q Vaporizer. This is another unit that I personally recommend, and it’s assembled right here in Canada, and at its price point, and even far above, probably the best home vaporizer money can buy.
Q: How can I turn my Air on?
A: To turn your Air vaporizer on just press and hold the center of the up and down buttons for a few secs.
Q: How to enable and disable the sound or beep on my Arizer Air?
A: To manage your Audio/Beep sounds, simply power on the device, then press and hold the Up Arrow button for approximately 2 seconds.
Q: How tight do you need to pack your Arizer Glass Stems?
A: Always pack it loose to ensure that the hot air can easily circulate through your dry herbs as you take a draw.
Q: I lost my instructional manual, can I request a copy?
A: Definitely. Please feel free to contact Arizer directly and they will be in touch as soon as possible and help you out.
Q: What makes the Arizer Air easier to draw compared with the Arizer Solo?
A: Both models, the Arizer Air and Solo come with the same stainless steel chambers and heating mechanism. So the Air’s easier drawing experience comes down to the smaller (shorter) glass aroma tubes, which provide better airflow in comparison to the Solo. Please note, all Air glass stems can be used with the Solo and vice versa.
Q: Can I use the Air for oils or wax?
A: The Arizer Portable Vaporizers are suitable for dry herbs use only. However, it comes with a potpourri dish in the kit. You can put a couple of drops of essential oil in the glass bowl, heat it up and enjoy the aroma.
Q: Where can I find the Serial Number of this device?
A: The serial number of your Arizer Air is located on the bottom of the device, on the battery cap.
