- Wear vinyl gloves.
- Hold the glasses facing away from you, with one hand holding onto the frames.
- Pour a gumdrop-sized dollop of Armour Etch on each lens, then rub it in circles with your fingers. It'll feel sort of gritty and textured. Rather relaxing, really.
- Avoid rubbing Armour Etch onto the frames — my wife's glasses didn't experience problems with some slop, but others have reported discoloration and other adverse affects.
- Keep rubbing for about a couple minutes or so.
- Rinse the glasses under warm water, taking care to remove as much residue as possible. This is tricky.
- Dry your glasses off with a soft cloth. Don't make the mistake of using paper towel as I initially did, because not only is it composed of abrasive wood fiber, ...
- Hold your glasses up to the light to view the results.
How do you use armour etch cream on glass?
You must apply a thick layer of etching cream in order for the chemical to react properly on the glass or mirror. Thick enough so that you cannot see the design of the stencil through the Armour Etch Cream. Stay within taped area. Allow ARMOUR ETCH Cream to remain on glass for one minute only.. No longer!
Does armor etch remove scratches from glasses?
Armor Etch Removes Scratched Coating from Glasses. Armor Etch is a cream normally used for glass etching, but it's also a truly handy repair tool for badly scratched glasses that have a UV or anti-glare coating.
How do I Etch A mirror or glass?
You must apply a thick layer of etching cream in order for the chemical to react properly on the glass or mirror. Thick enough so that you cannot see the design of the stencil through the Armour Etch Cream.
What is the best scratch remover for eyeglasses?
The Glass Etching Method If you have a deep scratch on your lenses, you may have to use a glass etching substance—a more powerful form of glass scratch remover. There are several different brands to choose from, but Armor Etch is one of the most popular and has consistently positive user reviews.
Does Armor etch remove scratch coating from glasses?
5:368:04Eyeglass Scratch Removal With Armour Etch - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I did make sure that I had a prior pair of glasses I could use as a substitute in case these wereMoreSo I did make sure that I had a prior pair of glasses I could use as a substitute in case these were ruined. The armour etch rinse. Right off no scrubbing. Required.
How do you clean glasses with Armour etch?
1:293:12Remove anti-reflective coating using Armour Etch - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter five minutes I'm going to rinse it off with warm. Water. After a majority of the etching creamMoreAfter five minutes I'm going to rinse it off with warm. Water. After a majority of the etching cream just washed away you know use your hand gently remove leftover particles on the lens.
Can you buff out scratches on prescription glasses?
Mix one to two tablespoons of baking soda with warm water until it forms a thick paste. Apply the baking soda-water mixture directly to the scratched part of your lenses using a cotton ball or a clean microfiber cloth. Use a consistent, circular motion and gentle pressure without pushing down too hard.
How do you get scratches out of anti glare glasses?
All you need is a non-abrasive and non-gel based toothpaste. Put a dollop of toothpaste on the scratched area of glasses and gently rub it in soft circular motions by using a cotton ball or cloth. Keep rubbing in small circular motions for a few seconds and see the scratches vanish.
What happens if you leave Armour etch on too long?
It can weaken your stencil making it even harder to get off, it can also scorch your glass as it is “eating” away at it. So be sure to not leave the glass etching cream on too long.
How long do you leave armor etch on glass?
Let the Etching Cream Sit Finally, you want to make sure you leave the etching cream on the glass for a few minutes. Armor Etch's directions say 1 minute, but I have found that a thick layer of etching cream left on for 4-5 minutes gives a better, deeper, and more defined etch.
Does WD 40 remove scratches from glass?
You should not use WD 40 in an attempt to remove scratches from glass. WD 40 isn't a polish; it's a lubricant that contains petroleum and oils.
Does WD 40 remove scratches?
No matter how careful you are with your car, a scratch or scuff mark is going to appear. While WD-40 Multi-Use Product cannot help in situations where the metal has been damaged, it can help with scuff marks, where another car has come into contact with yours and left some paint residue.
How does baking soda remove scratches from glasses?
To get scratches out of glasses using this technique, simply combine baking soda with water until it forms a glue-like paste. Apply the paste to the glasses using a lint-free cloth and use a circular motion to rub it into the scrape.
Can optometrists buff out scratches?
Can a professional help with eyeglass scratches? In terms of repair, probably not. Katsikos doesn't advise going to an optician or optometrist to try to fix a small scratch. Chances are, they won't be able to get rid of small scratches.
How do you remove anti scratch coating from plastic lenses?
Mix 5 parts of isopropyl alcohol with one part of saltwater. Place your glasses onto a plate and pour out the prepared solution just enough so the lenses are entirely submerged. Let it sit in the solution for an hour to soften the anti-reflective coating. Scrape off the anti-reflective coating using a plastic scraper.
How do you buff out scratches?
0:4211:57How to Remove Scratches from Car PERMANENTLY (EASY) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you know where the scratch is at the third step is to sand the scratch with 3000 grit. And thenMoreSo you know where the scratch is at the third step is to sand the scratch with 3000 grit. And then 5000 grit sandpaper. The fourth step is to use polish. And the final step is to buff it with wax.
How do you clean etching cream from glass?
Immediately wash off all the etching cream under luke warm water. Some of the stencil will be removed during this rinse, but it is OK. After all traces of the etching cream are washed away, remove all the remaining tape and stencil pieces. Clean the glass using window cleaner and dry completely.
How do you get etching cream off glass?
Mix a small amount of toothpaste with baking soda and apply the paste to your glassware with your finger, a soft cloth, or a toothbrush. Dissolve denture cleaning tablets in hot water and soak the item, then use a bottle brush or toothbrush to scrub the item clean.
How do you remove coating from glasses with etching cream?
How to Remove Coating from Plastic Glasses?With a cotton swab, scoop a little bit of etching cream. Carefully apply it to the whole surface of the lens. ... Let it sit for 5 minutes.With another cotton swab, do a little scrubbing around the surface of the lens. (both front and back).Wash thoroughly with soap and water.
How do you remove anti glare coating from plastic glasses?
There are two primary ways to remove the anti-reflective coating:For plastic (CR-39) or polycarbonate lenses, use an etching cream.For lenses made of glass, use a solution of isopropanol and saltwater to soften the coating, and then remove it with a plastic scraper.
How to make glasses feel textured?
Hold the glasses facing away from you, with one hand holding onto the frames. Pour a gumdrop-sized dollop of Armour Etch on each lens, then rub it in circles with your fingers. It'll feel sort of gritty and textured. Rather relaxing, really.
Can you fix scratched eyeglasses with armor etch?
Armor Etch can be a cheap fix for your scratched eyeglasses. Home » Frugal Living » DIY » Armor Etch can be a cheap fix for your scratched eyeglasses.
Is Armour Etch mentioned on Cool Tools?
Armour Etch mentioned on Kevin Kelly's Cool Tools - KK is an influential voice if he quotes you, and not just because one of his books was required reading for the stars of The Matrix: at times, he's like a high-tech Heloise.
Can you use Armour Etch on glasses?
Many reviewers have suggested using Armour Etch to remove glasses' antiglare coating, and thus, the scratches. Note that this ONLY applies to plastic/polycarbonate lenses in general — do NOT use it on actual glass glasses, because it'll "frost" and RUIN them.
What is armor etch?
Armor Etch is a cream normally used for glass etching, but it's also a truly handy repair tool for badly scratched glass es that have a UV or anti-glare coating. David Gulbransen of the CoolTools blog had a pair of glasses that were serviceable, save for where the specialty coatings on the lenses has become so covered with micro-scuffs ...
How to make brown paper soft?
Just don't rub the paper, blot only. One trick to making the commercial brown paper softer and more absorbent is to crush it in your hands, roll it into a ball. That breaks open more water absorbent fibers and softens the paper. See all replies.
How to remove etching cream from glass?
Immediately wash off all the etching cream under luke warm water. Some of the stencil will be removed during this rinse, but it is OK. After all traces of the etching cream are washed away, remove all the remaining tape and stencil pieces. Clean the glass using window cleaner and dry completely.
How to use etching cream on mirror?
Shake the ARMOUR ETCH Cream thoroughly. Work in a well lighted and well ventilated area near a water source. Wear plastic gloves and protective eye-wear. You must apply a thick layer of etching cream in order for the chemical to react properly on the glass or mirror.
How to get fingerprints off glass?
Clean the glass or mirror. Clean the glass or mirror thoroughly to remove all grease, dust and fingerprints. Avoid cleaner solutions that advertise Finger print resistant, as these cleaners leave a film on the glass that hinders the etching process. Avoid finger prints on the glass where you are going to etch. Dry glass or mirror completely.
How to get scratches out of glasses?
To get scratches out of glasses using this technique, simply combine baking soda with water until it forms a glue-like paste. Apply the paste to the glasses using a lint-free cloth and use a circular motion to rub it into the scrape.
What is the best way to remove scratches from glass?
The Car Wax Method. Vehicle wax products are also commonly used to remove scratches from glass. People often recommend trying Turtle Wax or Meguiar’s, since these brands have high reviews. Before applying the wax, it’s important to read up on how to get rid of scratches using this technique.
Does toothpaste damage glasses?
The danger of using toothpaste for removing scratches from glass is that many brands have granules or microbeads in them, which can diminish the surface of the glass in your lenses. Thus, it’s essential to find a toothpaste that has a low RDA rating to ensure you do not further damage your glasses.
How to remove etching cream from glass?
Immediately wash off all the etching cream under luke warm water. Some of the stencil will be removed during this rinse, but it is OK. After all traces of the etching cream are washed away, remove all the remaining tape and stencil pieces. Clean the glass using window cleaner and dry completely.
How to get fingerprints off glass?
Clean the glass or mirror. Clean the glass or mirror thoroughly to remove all grease, dust and fingerprints. Avoid cleaner solutions that advertise Finger print resistant, as these cleaners leave a film on the glass that hinders the etching process. Avoid finger prints on the glass where you are going to etch. Dry glass or mirror completely.
How to stencil on glass?
Place stencil sheet on the glass with the blue (tacky) side touching the glass. Secure stencil sheet temporarily to the glass with masking tape. Using the wood stick enclosed, transfer the stencil from the sheet to the glass surface by rubbing firmly over the design with smooth, even strokes.
Can you see stencils through armor etching cream?
You must apply a thick layer of etching cream in order for the chemical to react properly on the glass or mirror. Thick enough so that you cannot see the design of the stencil through the Armour Etch Cream. Stay within taped area.
How to clean Armour Etch glasses?
Clean your glasses thoroughly. Wash them with a mild cleaning solution or liquid soap and warm water. Use a soft cloth or sponge to scrub any residue that may be on the glasses and rinse off all traces of soap.
What is armor etch?
Armour Etch is a brand of fast-acting, specially formulated glass etching compound. It is meant to create permanent etched designs on glass and mirrors. Because the cream strips the glass of its UV coating, it can also be used as an inexpensive solution to strip eyeglasses of their UV protection or other coating.