AttiCat Blown-In Insulation System Adding insulation to your attic is a blast with the AttiCat® Insulation Blowing Machine! It conditions the AttiCat® Expanding Blown-In PINK Fiberglas® Insulation by breaking it up and fluffing it, adding millions of the tiny air pockets that give the material its insulating power.
How do I use atticat® machine?
AttiCat®machine . • Direct the hose toward the eaves, and begin by blowing insulation at the point furthest from the attic opening . Insulation should flow out of the hose and fall onto the surface 8 to 10 feet away . • As each attic section is filled, move slowly backward toward the attic opening .
What is atticat expanding blown-in insulation?
AttiCat Expanding Blown-In Insulation is designed for your attic insulation project in new or existing homes.
What is atticat® blowing machine?
3) the bags of expanding loosefill insulation . The AttiCat®blowing machine consists of the feeder and the base . The feeder is the portion of the system where the operator inserts the insulation; a gravity feed guides the insulation down onto the agitator bars in the base .
How long does atticat insulation take?
The specially designed AttiCat machine conditions the insulation by adding millions of tiny air pockets that give the material its insulating power and energy-saving R-value over time. Blowing the insulation should take less than 1.5-hours and the whole job can be completed in less than 4-hours based on a 1,000 sq. ft. attic at R-30.
How do you use AttiCat blown in insulation?
11:0112:46DIY Attic Insulation with the Owens Corning AttiCat® Expanding Blown ...YouTubeStart of suggested clipEnd of suggested clipAnd fall onto the surface eight to ten feet away as each attic section is filled move slowlyMoreAnd fall onto the surface eight to ten feet away as each attic section is filled move slowly backward toward the attic opening repeat. This process until the Attic is fully insulated.
Is AttiCat insulation itchy?
It's user-friendly; very intuitive with simple controls; it's safe; and it's virtually itch free.” While insulation is inherently a product that causes human skin to become itchy when they come into contact with each other, AttiCat is “loose in nature with no binder.”
How do you spray blown in insulation?
0:222:07The Right Way to Insulate Attics with Blown-in Insulation - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlways try to blow with not across the joists. As you blow work your way back toward the atticMoreAlways try to blow with not across the joists. As you blow work your way back toward the attic access point whenever possible hold the hose parallel to the floor. For the best.
Can I do my own blown in insulation?
You can do it yourself for about $500. Blowing attic insulation isn't hard, but it's dusty, sweaty work. To make insulating an attic easier, grab a helper and set aside two days: one for attic prep and the second to actually blow the insulation.
Can you have too much insulation in your attic?
It's possible to over-insulate an attic as too much will cause moisture buildup and eventually result in mold. Eventually, adding more insulation leads to diminishing returns in trapping heat as well.
Can you touch insulation with bare hands?
In most situations, touching the material without proper protection will result in a sharp stinging, burning and itching sensation. The good news is that skin irritation caused from touching fiberglass tends to go away, but the bad news is that it can last for days if you continue to wear the same tainted clothes.
Where should you not use spray foam insulation?
For areas too close to ceiling light boxes: You should not use spray foam to insulate areas around recessed ceiling canister lights. If you spray too close to the top of ceiling light boxes, you can trap heat and increase the risk of a fire.
What are the disadvantages of spray foam insulation?
List of the Cons of Spray Foam InsulationSpray foam insulation does not always fill every possible cavity. ... Spray foam insulation might encourage water damage for some homeowners. ... Spray foam insulation can sometimes shrink. ... Spray foam insulation requires a lot of experience to get it right.More items...•
Is spray in insulation worth it?
If you see the benefit of insulating your new construction home correctly from the start for long-term comfort, energy savings month after month, and fewer headaches while you live in the house, then spray foam insulation may very well be worth the extra cost to you.
How many inches of blown insulation should be in my attic?
about 10 to 14 inchesThe recommended level for most attics is to insulate to R-38 or about 10 to 14 inches, depending on insulation type.
How thick should blown in insulation be?
How thick should blown attic insulation be? To get the most benefit from blown in insulation, you should have no less than ten inches and a maximum of fourteen inches. Choose a high R-Value for the best thermal performance, experts recommend R-38.
Should I remove old insulation before blowing in new insulation?
Expert contractors that specialize in insulation advise that removing old fiberglass insulation is best before installing new cellulose insulation because of possible mildew, mold, or rodent excrement.
What kind of insulation is itchy?
fibreglass insulationThroughout history, fibreglass insulation has been known to cause itchiness due to the small glass fibres falling off the batts during installation. Earthwool insulation is a type of fibreglass/glasswool insulation, however it is manufactured with a revolutionary ECOSE binder.
Can insulation make you itchy?
The most common health risk of fiberglass insulation is skin irritation. This occurs when your skin gets in contact with fiberglass particles, resulting in itchiness and skin rashes. Particles may come in contact with your skin and trigger allergies, especially if you have sensitive skin.
How do you stop itching after installing insulation?
How To Get Rid Of Insulation Rash:Take a cold shower and avoid rubbing the skin (this may cause shards to get embedded)Wash clothing separately.Use an anti-itch cream or powder for relief.Change bed sheets for a few days.Seek medial attention if rash continues.
Does Rockwool make you itch?
Stone wool fibers are not classifiable as OSHA irritants. Coarse fibers and dust from mineral wool products can cause emporary and reversible irritation (itching, redness) of the skin and eyes.
How much will you need?
Please note: calculations are estimates and can only be made using whole numbers.
Product Overview
The attic is 1 of the easiest places to add insulation to improve the comfort and energy efficiency of your home. AttiCat Expanding Blown-In Insulation is designed for your attic insulation project in new or existing homes.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
