How to embroider on paper cards
- Step 1: Hoop a piece of stabilizer.. I think you can really get away with any type of stabilizer for this project. I...
- Step 2: Float the card. If you are using adhesive-backed tearaway stabilizer, score the inside edge of the stabilizer...
- Step 3: Start stitching on your design. Hearing the needles pierce through the card is very...
What is a color card for embroidery?
You can also use a color card to easily match embroidery floss to a piece of fabric, a paint color, or any other item of decor. Here's how to use and make the most of a thread color card.
Can I embroider on cards?
Embroidering on a cards is a great way to get comfortable with your embroidery machine. What type of cards should you embroider on? There are basically two ways to embroider on a card. You can either embroider on paper and then glue it to the front of a plain notecard.
How do you embroider on a cardstock?
Simply cut a piece of cardstock slightly smaller than 5″x7″, apply glue or two-sided tape along the perimeter then center the cardstock over the back of the design. When you see how beautiful these machine embroidered greeting cards turn out, you’re gonna want to make them for every special occasion!
What is the best paper for embroidery on greeting cards?
Watercolor paper or cardstock works well. Lovely greeting card machine embroidered by Nancy Dawson of Paper Dreams & Creative Wishes. Photo used with her permission. Keep in mind that if you stitch out an embroidery design on the front of a folded card, the ugly, backside of the embroidery will be on the inside of the card.
See 7 key topics from this page & related content
How do you do embroidery cards?
3:598:13Hand Embroider a Greeting Card: Learn with Me Series - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you basically come up at the top and down at the bottom then you're going to come up on the rightMoreSo you basically come up at the top and down at the bottom then you're going to come up on the right-hand. Side. And you're going to go back down on the bottom left.
How do you machine embroider Christmas cards?
9:1021:06Machine Embroidered Greeting Cards - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first step stitches a line around the outside which shows where to place the cardstock for yourMoreThe first step stitches a line around the outside which shows where to place the cardstock for your card. Okay remove the hoop from the machine carefully.
How do you make embroidered note cards?
0:3915:55How to make Machine Embroidered Greeting Cards ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipA metal ruler. And a pencil my embroidery scissors. I also like to use a little sewing needle or penMoreA metal ruler. And a pencil my embroidery scissors. I also like to use a little sewing needle or pen actually a bone folder that helps you get a nice crease in your card.
How do you sew on card stock?
12:1538:22Stitching on Cards - YouTubeYouTubeStart of suggested clipEnd of suggested clipI pull the thread tight around the needle because it's wrapped around that needle. And then I justMoreI pull the thread tight around the needle because it's wrapped around that needle. And then I just pull the needle completely through and I end up with a French knot that holds my sequin in place.
Can I machine embroider on paper?
You can embroider on paper when running your machine at full speed, but if you have the option to reduce the speed, do so. It might be a personal preference, but I've found that I get a cleaner, crisper result when embroidering on cardstock at a slower speed. What kind of needle should I use? Definitely a sharp needle.
What can I machine embroider on?
5 Easy Embroidery Machine Projects for BeginnersTerry Cloth Towel. Towels are stable and easy to embroider, especially if you're only adding a simple monogram or design to a good-quality terry cloth towel. ... Woven Cotton Fabric. ... Fleece Jacket or Fleece Blanket. ... Linen Embroidery Machine Projects. ... Canvas.
How do you embroider on paper?
4:077:39Handi-hour Crafting: Embroidery on Paper - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut many times it's best to just leave I would say at least an eighth of an inch if not more betweenMoreBut many times it's best to just leave I would say at least an eighth of an inch if not more between each stitch. You won't be able to have tight tiny little stitches like you would in fabric.
How do you make sewing cards?
0:097:12Making Greeting Cards with Fabric and Paper - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith stitching of course I did a sneaky trick I taped down the edges first with double stick tape.MoreWith stitching of course I did a sneaky trick I taped down the edges first with double stick tape. And then of the horizontal lines and then I wove in the vertical lines.
What are stitch cards?
Lori Holt of Bee in My Bonnet released a new addition to her Stitch Card Series with Stitch Card Set H. This farm-friendly set features four ridiculously cute animals, that are sew much fun to stitch up. You can mix and match each card into other projects, or stitch them together as one big piece!
Can you sew card on a sewing machine?
You don't need an industrial machine to stitch through unconventional materials like plastic, paper, and cork. A basic home machine can easily handle these and many others, as long as the material fits under the presser foot and the needle can pierce it.
How do you attach a cross stitch card?
3:036:52Mounting cross stitch in an aperture card - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe best way to line it up is to make sure you've got the same amount of space top and bottom leftMoreThe best way to line it up is to make sure you've got the same amount of space top and bottom left and right and then once you're sure it's in place as i've done there give it a good rub.
Can you use a sewing machine on cardstock?
2:224:21Sewing on Cards - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd helps keep my needle clean and my machine clean as well I place the cardstock into my machineMoreAnd helps keep my needle clean and my machine clean as well I place the cardstock into my machine and I line up the edge of my cardstock with the side of my presser foot.
Does sewing paper ruin the sewing machine?
Thicker paper or cardstock works well when sewing on a machine. I have successfully stitched printer paper, wallpaper, and old maps on my sewing machine many times. Thin flimsy paper such as book pages can tear easily. If you still want to use this kind of paper, consider using fusible stiffening paper.
The 5 biggest reasons to buy a floss color card
You can easily find the best matching alternative in your stash or swap the entire color palette of a pattern.
Why you need a floss color card with true colors
The biggest advantage of a real thread color card compared to a printed color card, photo’s or an online color card is simple. The colors are accurate.
Learn which types of threads are available per each floss color
The DMC floss color card comes as a booklet. Once opened you will see all 500+ colors in neat rows of color families.
Find embroidery floss color families and shades
The DMC floss color card is arranged in color families and shade groups rather than numerical order. This makes it really easy to find a range of shades of a particular color. You can find color families in a collumn with different shade groups combined.
Find floss color by its number
Sometimes you may look for a floss color by its number. The color card includes a handy table that will help you.
How to embroider on cards?
To embroider on cards, you’ll need to prick tiny holes in your card stock, and this is done with a paper-piercing tool. These tools can be purchased specifically for paper piercing, but you don’t need to make the investment if you have a few household items on hand.
What do you need to make paper embroidery?
The supplies for paper embroidery are fairly simple. You’ll need embroidery floss or thread, something to pierce card stock with, a piercing mat of some sort, scissors, needles, card stock cut to the size you want to stitch on, decorative paper to back your embroidery or blank cards to mount your embroidered on, a glue stick or strip glue, and tape.
How to stitch a card?
Some prefer using heaver threads for bolder lines that cover the holes pierced in the paper. Some crafters prefer keeping their stitches tight and close together, to create finer lines. Any approach works. Just experiment for the look you want! Thread one strand of floss into the eye of a needle. Do not knot the thread. The threaded needle should fit in the pierced hole, without being too tight. If the needle is too tight, it won’t pass through the hole without tearing the paper. You might need to adjust the size of the needle you use to pierce your paper or the size of the needle you are stitching with, if the holes are too small. Insert the needle from the back of the card to the front, and pull the thread through, but stop before pulling all the way through. Use a small piece of tape to secure the end of the thread. You can tape the ends outside the stitching area, but by the time you finish the whole design, you’ll probably have tape everywhere inside and outside the stitching area. Don’t stress over the mess on the back! Just try to tape away from unstitched dots in the pattern, so that you don’t have to pass your needle and thread through the tape while you stitch. The stitch used in most paper embroidery is just a simple straight stitch. On lines that end in a tight swirl, I like to begin on the swirl. If there are no swirls, just begin where the design line begins, or, in cases of stitching circles, begin anywhere. When stitching lines and swirls, how many dots you skip on your pattern will determine the thickness of the line and how much the line fans out on any curves. For finer lines, skip two dots and go down in the third dot. For heavier lines that fan out even more on curves, skip three or four dots on your pattern. I like skipping three dots and going down into the fourth dot for most curves and swirls. It works out well, especially with the satin floss. When possible, begin your next stitch right next to where you ended the previous stitch. This isn’t always possible, because once you start to fill the line, the other stitches will be in the way. If you always look for the shortest route to begin your next stitch, you’ll conserve thread and won’t have as much thread covering the back of the work. Make sure as you progress around the design lines that you’re always skipping the same number of holes and always taking the thread down into the paper on the same side of the line. If you don’t want your curves to fan out as much, though, you can always reduce the number of dots you skip around the curves, making the line thinner. Continue stitching all the line in this manner, until it is finished. To end the thread, tape it out of the way on the back and snip it. When stitching with DMC satin floss, the resulting lines will be somewhat thick and nice and shiny. If your thread begins to fray or look dull at any point when stitching with it, end the thread and start a new one.
How to pierce a card?
Piercing the Paper. To pierce the paper that you’re going to stitch on, place the card stock that you want to stitch onto your piercing mat (or craft foam or styrofoam). Align the pattern on top of your card stock, so that the design is situated where you want it on your card.
What threads are good for sparkly accents?
These are great threads for adding sparkly accents to cards. DMC Diamant, which we discussed in an earlier tutorial also works well for the sparkly bits. You can also use DMC embroidery floss, which is great for a more subdued look for more muted or natural designs.
How to end satin floss?
To end the thread, tape it out of the way on the back and snip it. When stitching with DMC satin floss, the resulting lines will be somewhat thick and nice and shiny. If your thread begins to fray or look dull at any point when stitching with it, end the thread and start a new one.
How to personalize Christmas cards?
If you love to stitch, one of the best ways to personalize your Christmas cards and make each card a gift in itself is to embroider it. Sure, it takes a little more time - it’s not quite as quick as cracking open a box of store bought cards and signing your name to them - but it’s a great way to show that you care to send ...
What size cardstock should I use for embroidery?
A tri-folded piece of cardstock offers cover for the stitching. That also reduces the available area for embroidery. An 8.5 x 11” card leaves just 3.66” for the embroidered piece. A bi-folded 8.5 x 11” allows 4.25 x 11” for a vertical card and 5.5 x 8.5” for a horizontal fold. See examples below.
How to straighten embroidery?
Straight stitch close to side edges of embroidery and above top edge. Activate laser and set to desired width to keep the stitching line straight.
What is cardstock in Dream Machine?
Cardstock is a bi-folded, fancy 12 x 12” piece, embroidered with this feminine princess in a floral heart. The design caught my eye when I first got THE Dream Machine. At last I found my chance to stitch it. It is a built-in design into THE Dream Machine and THE Dream Machine 2.
What is the item number for Mickey Mouse cards?
The iBroidery.com design is the Classic Mickey Mouse Gives Minnie Flowers, Item Number: sef5 20L
What size envelopes can I use for a trifolded card?
Envelopes: tri-folded 8.5 x 11” will fit in business size envelope. Larger bi- or tri-folded cards can fit in specially sized purchased envelopes or self-made envelopes from larger card stock. So, let’s get started……
Where to sew fabric for trifold cardstock?
Sew fabric to center section of tri-folded cardstock or front of bi-folded.
Where to apply double sided tape?
Apply double sided tape generously to underside of section #2, around the perimeter and across the center.
What is a color card?
A color card is useful when you want to swap out colors specified in a design to make it your own, or if you don't have a particular color in your stash and want to make a substitution. You can also use a color card to easily match embroidery floss to a piece of fabric, a paint color, or any other item of decor.
What is DMC embroidery floss?
You may be most familiar with DMC's 6-strand cotton embroidery floss, but they also make pearl cotton, along with other specialty needlework threads. The DMC color card provides information on all these lines.
How is DMC thread organized?
At the store, DMC thread is typically organized by color number. That can make it really hard to see and compare all the colors in a particular shade because they are spread out across the rack. The color card shows them all together, so you can see at a glance what the options are.
Why is thread color important?
Thread colors on a color card are organized not by number but by shade. This is really helpful when selecting colors because it lets you compare neighboring shades. For example, you can scan the column of blue-green shades or pink-orange or purple to find just the perfect color.
Does DMC make real thread cards?
DMC makes both kinds. It used to be hard to find the real-thread cards, but DMC recently republished the real-thread version so they are (for now) more readily available. Color cards with actual thread samples are generally more expensive than those with printed color swatches, but they are also far more accurate.
