How to use your wax & grease remover:
- Wipe the area you’d like to paint with the wax & grease removing wipe.
- Let it dry.
- Wipe the area with a chamois towel to make sure it’s dry and remove dust.
- Paint!
How do you use wax and grease remover to clean your car?
The best cleaning results are obtained by using one cloth dampened with wax and grease remover to initially wipe surfaces using one hand, followed by a clean dry cloth in the other hand to remove lingering residue and moisture. Kind of like Wax On Wax Off, if you’ve ever seen the Karate Kid movie.
What is wax and grease remover used for?
It allows the paint to bond effectively to the surface, which means for a smoother outcome with no residue left. Wax & grease remover is an effective surface preparation treatment that removes wax, grease, tar, grime, oil, glue, polish and other contaminants prior to sand and finishing.
Can you use wax and grease remover to remove silicone?
It is often used as a pre-painting surface cleaner, heavy-duty solvent cleaner and also is great in assisting with the removal of silicone. It is important to always test before using. When using wax & grease remover it is important to be cautious.
What happens if you don’t use a wax and grease remover?
IMPORTANT: Every part of any surface to be painted must be cleaned with a wax and grease remover product prior to the application of paint. If you don’t use such a type of auto surface cleaner, you run the risk of contaminants on the surface ruining an otherwise professionally applied paint job.
When should you use wax and grease remover?
0:584:59Why You MUST Use Wax and Grease Remover Before a Paint JobYouTubeStart of suggested clipEnd of suggested clipWhy do you need to use wax and grease remover. It. Absolutely takes off all traces of dirt greaseMoreWhy do you need to use wax and grease remover. It. Absolutely takes off all traces of dirt grease oil silicone. And any other surface contaminants.
Can I use wax and grease remover before painting?
IMPORTANT: Every part of any surface to be painted must be cleaned with a wax and grease remover product prior to the application of paint. If you don't use such a type of auto surface cleaner, you run the risk of contaminants on the surface ruining an otherwise professionally applied paint job.
What is automotive wax and grease remover?
What Are Car Wax Removers? Car wax removers are liquid solvents designed to strip wax, grease and other surface substances from vehicle paint. Some detailers claim sticky resin products, called clay bars, also work for wax removal, but there's some debate about this.
Can you use wax and grease remover on plastic?
Preparation of New Primed Plastic Parts Though new primed parts do not need the application of an adhesion promoter, they do need to be cleaned using the three-step method (hot soapy water, isopropyl alcohol, and wax-and-grease remover).
What do you wipe a car down with before painting?
0:124:04How To Prep Your Car for Paint with Kevin Tetz at Eastwood - YouTubeYouTubeStart of suggested clipEnd of suggested clipFinally before I shoot paint I use an alcohol wipe down in a pump sprayer the alcohol gets veryMoreFinally before I shoot paint I use an alcohol wipe down in a pump sprayer the alcohol gets very aggressive things like acidic fingerprints up off of the substrate.
Can I use acetone for grease and wax remover?
Saturate the spilled wax with acetone. On small spots, soak a soft cloth in the chemical and rub it directly onto the wax spot. Allow the acetone to sit on the surface for five minutes to soften the wax.
Should I remove old wax before waxing car?
Periodically, it is important to remove old car wax before reapplying a new coat. The previous wax could streak or the paint job may begin to look dull, both of which are signs that it is time to reapply.
How long does a car wax last?
For the average DIY wax job, expect a lifespan of about six weeks or so, and then it's time to strip the wax off, wash and decontaminate everything, and reapply once again. And while synthetic blends may last a tad longer, they too will lose their luster and begin to allow the elements to crap all over your car.
Do you need to remove wax before clay Bar?
Removing your car's wax, sealant or coating prior to claying will help the clay bar fully remove the contaminants without being impaired by the paint protection layer. However, in most cases the clay will be capable of removing both the wax/ sealant/ coating, as well as the contaminants.
How do you degrease plastic before painting?
InstructionsClean the Surface of the Plastic. Fill a bucket with warm water and a little dish soap. ... Sand Glossy Surfaces. Paint adheres far better to rougher matte surface plastics than to glossy plastics. ... Wipe Down the Plastic With Mineral Spirits. ... Spray the First Coat of Paint. ... Apply Subsequent Coats of Paint.
How do you get dried wax off plastic auto trim?
0:504:47HOW TO REMOVE CAR WAX FROM BLACK PLASTIC TRIM ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipStore. And buy one of these that's right it's a big eraser. Watch this find some black plastic trimMoreStore. And buy one of these that's right it's a big eraser. Watch this find some black plastic trim with some wax on it take your eraser. And start rubbing. Gently.
Do you need to scuff plastic before painting?
3:1010:35How To Paint Plastic - HD - The Basics - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat's not plastic that is that protective coating on the outside. And once you cut through it.MoreThat's not plastic that is that protective coating on the outside. And once you cut through it. That's all you really need to do you don't need to really get into the plastic that much you just want
How do you remove grease from paint primer?
Combine two parts cornstarch with one part rubbing alcohol to form a thick paste. Rub the paste onto the grease spot and allow it to air-dry completely. Brush the dried paste from the wall. The paste absorbs the grease on the wall and eradicates the spot.
Can you clean grease with vinegar?
Greasy Stovetop Vinegar's acidity helps cut through grease easily. Spray some vinegar and water mix onto a splattered stovetop, let it sit for 10 minutes, and then scrub down with soapy water. It should wipe right off. If not, leave it to sit a bit longer.
What is wax remover?
WAX REMOVER is an alkaline-based wax stripper for deep removal of organic dirt, greasy surface stains, and greasy dirt, even if stubborn or old. It is also effective on mould, algae and bio residues. It can also be used to remove existing surface treatments and old layers of wax.
What is in panel wipe?
Panel wipe, also known sometimes as panel prep, is traditionally a solution made up of distilled water and Isopropyl Alcohol. Panel wipe is often known as an IPA wipe because of the main active ingredient being Isopropyl Alcohol.
What is wax and grease remover?
Wax & grease remover is an effective surface preparation treatment that removes wax, grease, tar, grime, oil, glue, polish and other contaminants prior to sand and finishing. It is often used as a pre-painting surface cleaner, heavy-duty solvent cleaner and also is great in assisting with the removal of silicone.
What is prepsol wax and grease?
Wax & grease remover also known as prepsol is a mixed hydrocarbon. The flashpoint of wax & grease is -30ºC and the boiling range is 50-200ºC with a specific gravity of 0.76. Wax & grease is the perfect mixture of different solvents in order to produce a versatile product. It is a clear bright solvent with high solvency.
What to wear when using wax remover?
When using wax & grease remover it is important to be cautious. It is advised to wear safety glasses and use chemical resistant gloves. If you need any advice please do not hesitate to contact us as we are happy to help.
