How to operate your Mendota Fireplace Remote
- Push the on/off button
- The remote control will show all active icons on the screen
- Press the thermostat button you wish to use by pressing the thermostat button. Off indicates manual mode On means normal...
- Off indicates manual mode
- On means normal mode
- Smart indicates smart mode
- In manual mode, the fireplace will start on the...
How do I operate my Mendota fireplace remote control?
How to operate your Mendota Fireplace Remote Push the on/off button The remote control will show all active icons on the screen Press the thermostat button you wish to use by pressing the thermostat button.
Why won't my Mendota fireplace turn on?
This is why Mendota states you should have your fireplace in CPI mode during fireplace season. Make sure backup batteries are not installed and shut off power to the fireplace. Power the remote ON for 2 seconds. Power the remote OFF for 2 seconds. Power the remote ON for 2 seconds. Then power OFF again.
What is lockout mode on a Mendota fireplace?
Lockout mode (electronic ignition fireplaces and inserts only) prevents the fireplace or insert from not lighting, and is caused by three failed ignition attempts in a row. This is why Mendota states you should have your fireplace in CPI mode during fireplace season. Make sure backup batteries are not installed and shut off power to the fireplace.
What to do when your Mendota fireplace pilot light goes out?
Then, test them and re-ignite the pilot light. If still your fireplace pilot light won’t stay lit, replace the thermopile and the thermocouple. The pilot light of your Mendota Fireplace goes out if the thermopile and the thermocouple get faulty. The thermopile delivers all the necessary voltage your fireplace requires to run flawlessly.
What does the remote control show?
How long does it take to power off a remote?
How to turn on accent lights on a sprite?
Does smart mode allow heat customization?
Mendota remote issues | Hearth.com Forums Home
Have had Mendota for 4 months. no issues. now remote not working and pilot out? Tried to restart it but no success.
Mendota – tagged "remote-controls" – Fire-Parts.com
General Enquiries [email protected]. Parts / Technical Enquiries [email protected]. Return / Mailing Address 9145 General Court Plymouth MI 48170
Mendota CPI Mode | Hearth.com Forums Home
Morning. I have a newly installed Mendota M47 linear propane fireplace. The FP has been installer for about 2 months. It is currently in CPI mode (continuous pilot light). Yesterday I noticed the pilot light was out but didn't think anything of it. I hit the power button to turn the FP on...
MENDOTA GAS DIRECT VENT FIREPLACE
2 SAFETY AND WARNING INFORMATION READ and UNDERSTAND all instructions carefully before starting the appliance.FAILURE TO FOLLOW these instruc- tions may result in a possible fire hazard and will void the warranty. Any safety screen or guard removed for servicing must be replaced before operating this appliance.
What does the remote control show?
The remote control will show all active icons on the screen
How long does it take to power off a remote?
Power the remote OFF for 2 seconds.
How to turn on accent lights on a sprite?
To turn on the accent lights, press the mode icon until the aux icon is available .
Does smart mode allow heat customization?
Keep in mind, smart mode does not allow heat customization
Why does my Mendota fireplace beep?
Both of them have batteries. It will turn off your fireplace if the batteries of your receiver are getting low. The beep you hear is generally the low signal battery.
Can a remote control on a gas fireplace transmit a signal?
Your fireplace remote control will not transmit a signal if the manual switch of your gas hearth is flipped to On position. So, check it and set it to OFF position. Now, try and test your remote control.
What does the remote control show?
The remote control will show all active icons on the screen
How long does it take to power off a remote?
Power the remote OFF for 2 seconds.
How to turn on accent lights on a sprite?
To turn on the accent lights, press the mode icon until the aux icon is available .
Does smart mode allow heat customization?
Keep in mind, smart mode does not allow heat customization
