To install a molly bolt, drill a hole in the wall at least one half inch in diameter. Drill a pilot hole, if necessary, and insert the molly bolt. Then, screw the item to the wall. When hanging heavy objects on plaster walls, plastic wall anchors won’t work. To use an anchor that will hold up plaster, choose metal anchors.
Full Answer
How do you attach molly bolts to walls?
Insert the Molly bolt into the predrilled hole and use a small block of wood and a hammer to tap the bolt in so that it’s flush with the wall. Use a drill or screwdriver to tighten the screw to expand the anchor in the wall. Remove the fastener to connect your object to the new anchor.
How do you use Molly drywall anchors?
Molly anchors are unique in that the underside has sharp tips that help them grip the drywall. Insert the Molly bolt into the predrilled hole and use a small block of wood and a hammer to tap the bolt in so that it’s flush with the wall. Use a drill or screwdriver to tighten the screw to expand the anchor in the wall.
How do you drill a molly bolt?
Using the drill create a hole ensuring that it is big enough to drive the Molly bolt through. The hole should be slightly larger than the anchor. If the hole is too small then the bolt may get stuck and it will be difficult to pull it back out without damaging the wall.
What are molly bolts used for?
Molly bolts are fasteners with expandable, threaded sleeves used to secure objects of various weights to a surface. When one is inserted into a pre-drilled hole and the bolt tightened, the sleeves flatten to provide a firm anchor. Molly bolts come in many grip lengths and diameters for varying wall thicknesses and loads.
How to install Molly bolts?
Insert the molly bolt, pointed-end first, into the pilot hole and lightly tap the head using a hammer. The amount of force that you need to drive it in depends on the size of your pilot hole. If the diameter of the pilot hole is the same as that of the diameter of the molly bolt, then you only have to apply little force. If the pilot hole is considerably smaller, then you will need to expend more effort. This is why a pilot hole only slightly smaller is recommended. It will provide the best hold with the least trouble.
What is a Molly bolt?
Molly bolts. Hammer or mallet. Screwdriver. Molly bolts are fasteners with expandable, threaded sleeves used to secure objects of various weights to a surface. When one is inserted into a pre-drilled hole and the bolt tightened, the sleeves flatten to provide a firm anchor.
What are anchor bolts used for?
Note: Although these anchor bolts are commonly used to affix light and heavy objects on drywall, there are also some for other surface types such as sheet metal.
Can Molly bolts be used in drywall?
Molly bolts come in many grip lengths and diameters for varying wall thicknesses and loads. Installing these in drywall is easy, but you should always make sure you are using the right materials and procedures for the most effective result. Continue reading below Our Video of the Day.
Can you use Molly bolts on a mirror?
Reversing about two full turns should be all you need regardless of whether you are hanging picture frames or a heavier objects like a mirror. You can use molly bolts to fasten even heavier objects such as small shelves. Simply choose heavy-duty bolts with a large diameter for heavy objects rather than the normal size.
How does a plastic anchor work?
How it works: plastic anchors or steel anchors are reinforcements inserted in drywall to add support to screws. Added support prevents screws from falling out of drywall or hollow surface walls .
What is toggle bolt?
Purpose: A toggle bolt has a spring-loaded nut that butterflies open when inserted into the wall. Once tightened, it creates tension to clamp to the back of the drywall.
What are toggles for drywall?
Toggles offer the most muscle of any traditional drywall anchors and mollies, sold to accommodate the heaviest of items you need to hang. They come in a variety of lengths and thicknesses making it possible to secure both heavy items and into thicker drywall or through other materials, such as lathe and plaster.
What are drywall anchors made of?
There are many different types of drywall anchors sold in different sizes and thicknesses, and are made of various materials including plastic and steel, so keep in mind that traditional fasteners can support a range of weights and will come in handy in different-use scenarios.
Can you drill a hole for a toggle bolt?
Follow manufacturer directions to predrill a hole to the correct width. The hole you drill for any toggle bolt is likely wider than any other drywall anchor, so be sure that the item you’re attaching will fully cover the hole.
Can you pop a plastic wall anchor into a hole?
They’re easy to install and — as a matter of fact — if you’re looking to upgrade or replace an existing plastic wall anchor, you can easily pop one of these into the existing hole so that it can hold more weight.
Can you reverse a butterflied bolt?
It is rare that they would break inside the wall or pull through the drywall if you’re using hardware suitable for the weight of your item. Once inserted into the drywall through the predrilled hole, you cannot reverse course and retrieve the butterflied nut.
How to get Molly bolt out of wall?
Mark the spot you have chosen with a marker. Using the drill create a hole ensuring that it is big enough to drive the Molly bolt through. The hole should be slightly larger than the anchor. If the hole is too small then the bolt may get stuck and it will be difficult to pull it back out without damaging the wall. If this happens then use pliers to dislodge the anchor.
What is a Molly bolt?
Molly bolts are wall anchors that can be used to hang moderate weights on walls. They are sturdier than other anchors since the anchor expands at the back once lodged in the wall. This allows for a firmer hold in the wall and the bolt can then take a heavier weight without dislodging. Molly bolts can be made of plastic or metal depending on your ...
Can you use plastic Molly bolts in hollow walls?
Plastic molly bolts are more difficult to use and are preferred by professionals. They are also fairly easy to install though they do need to be installed in hollow walls since the anchor needs a place to expand at the back. Continue reading below Our Video of the Day.
Can you use Molly bolts on plaster?
The Molly bolt is now ready for use. You can hang your desired object but make sure it’s not too heavy for the bolt or it may rip the plaster and the whole thing will come crashing down. You can now clear the space of clutter and enjoy your handy work. Fasteners.
