The proper procedure for using the NanoSkin pads are as follows, by hand using no pressure you want to concentrate on an area that is about 2ft x 2ft to ensure thorough surface prep. Apply Glide mixed 7:1 with R/O or DI water liberally to the surfaces, do not skimp out to ensure proper lubrication and minimize marring.
Full Answer
What is nanoskin and how does it work?
Nanoskin promote the re-epithelialization of the wound bed. Several clinical cases and studies have demonstrated the efficacy and safety of NanoSkin. All chronic wounds can be treated with Nanoskin with the ultimate goal to close the wound.
What types of wounds can be treated with nanoskin?
All chronic wounds can be treated with Nanoskin with the ultimate goal to close the wound.
What is the role of the nanoskin extracellular matrix?
This is ideally supported by the Nanoskin extracellular matrix as it promotes the release of oxygen, provides an optimal moisture balance and stimulates the synthesis of growth factors, glycosaminoglycans and fibronectin. All this helps to form the new extracellular matrix (ECM).
Are nanoskin antiseptic wipes safe to use?
Happy Thanksgiving! Nanoskin Antiseptic wipes can be used as a skin disinfectant and ideal for cleansing wounds. They are effective against bacteria, viruses, and fungi. #alcohol #wipes #cleaneating #detailing #cardetailing #housecleaning #covid_19 #safe
How do you use Nanoskin pads?
Mist sufficient GLIDE onto the surface evenly. Work the surface with dual action orbital polisher (Low Speed) using light pressure or by hand with Hand Strap Applicator (AS-007) using light pressure. Wipe off residue with clean dry microfiber towel. Note: Do not allow the lubricant to run dry on the surface.
How do you use a clay pad?
5:287:23Clay Eraser Disc - Chemical Guys Clay Bar Car Care - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace it right on the interface pad. Itself. And now you are ready to spray the surface. Down. AndMorePlace it right on the interface pad. Itself. And now you are ready to spray the surface. Down. And then easily clay it by hand so it gives you a lot of versatility on how to use the product.
How do I use AUTOSCRUB?
Wipe off residue with clean dry microfiber towel.Spray sufficient amount of lubricant on the vehicle glass surface. ... Side the Autoscrub across the lubricated paint surface using a back and forth motion with light to medium pressure.Wipe and buff dry residual lubricant off the paint surface using light pressure.More items...
What is better clay bar or clay mitt?
First, since clay bars tend to be smaller, you get less use out of them. They typically last up to about 20 applications, while clay mitts can last closer to 100. In addition, you have to keep clay bars covered with plastic or inside a container so they don't dry out, while clay mitts don't need to be covered at all.
How does a clay bar work?
How do clay bars work? Automotive clay will be gently moved across the surface of a vehicle and 'lifts' any foreign bodies that protrude from it due to the tacky surface of the clay. These small particles of contamination will then be suspended within the clay bar itself and not deposited back on the surface.
Can you use clay lube as a pad conditioner?
You can use it as an alternative if you run out of Pad Conditioner however, it will be your best as far as lubrication for your pads.
How do you clean Nanoskin?
Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it.
What can I use instead of a clay bar?
What Are Alternatives To Using a Clay Bar?Clay Mitts. Clay mitts provide the same services as a clay bar, but they are much easier to use. ... Using Clay Mitts. Clay bars should be replaced whenever you drop them on the ground as they can quickly absorb too many contaminants. ... Clay Towels. ... Clay Pads.
How do you store Nanoskins?
Re: best way to store nanoskin I've found that one of the cheapest and easiest ways to store them is in a large ziplock bag. If you use a large enough bag or other type of container, you won't have to fold the towels and can mitigate it sticking to itself and or the container.
Do you use clay bar on wet or dry car?
Before using a clay bar, your car should be washed and dried to remove a majority of contamination on your vehicle. The more contaminated the paint is the more likely imperfections can be added during the clay bar process.
Do I use a clay bar before or after washing my car?
Timing is Key – When to Clay Bar Claying should always come after a good wash. You want to get as much of the dirt out as possible, by scrubbing and brushing and scrubbing some more. Your choice of cleaning agent will also ensure that your vehicle is ready for the use of a clay bar.
Do you clay bar wet or dry?
I have found if you clay the car when its wet, your towel for drying up the clay lube gets saturated faster and i find that more annoying than taking the time to dry it first personally. BUT if you plan to wash it again after claying, then you don't even need to wipe. But give claying the car wet a try!
What is the best surface to do clay on?
It's best to work on a smooth surface, like on your kitchen counter or a marble slab. Laminate countertops make a great option for working with polymer clay.
Do you clay bar in circles?
Using clay without enough lubricant can cause marring and leave small, difficult to remove, pieces of clay behind. Here we demonstrate the proper use of a clay bar towel – lubricating well with a quick detail spray. The clay should be moved across the surface in straight, overlapping lines – not circles.
How do you use a speed clay bar?
0:222:03Mothers Polish -- Using Speed Clay 2.0 (How To Video – Part 2 of 2)YouTubeStart of suggested clipEnd of suggested clipPerformance lightly glide the tool across the surface and linear overlapping motions if you listenMorePerformance lightly glide the tool across the surface and linear overlapping motions if you listen closely you can actually hear the contaminants being removed from your car's paint.