LED Neon Flex Instructions
- Cutting LED Neon Flex Locate the cutting mark on the side of the LED Neon Flex. This will be designated by a vertical dashed line. ...
- Connecting the Power Pin Position the LED Neon Flex so that as you look at the cut end the two exposed wires are located on your right hand side. ...
- Connecting the Power Cord, Connectors and Jumpers ...
- Heat Shrink Tubing Placement ...
- Step 1: Cut the LED Neon Flex tube. ...
- Step 2: Attach connectors to LED Neon Flex strip. ...
- Step 3: Connect the power light pin. ...
- Step 4: Connect the power cable. ...
- Step 5: Ensure the light connection is safe.
Why choose LED neon flex LED neon lighting?
LED Neon Flex lighting is naturally simple to install and the design allows the tube to be easily cut to size, extended and bent into the correct shape. Here are the steps you need to follow to create the ideal LED lighting fixture.
How do I connect the LED neon flex to my TV?
Holding the LED Neon Flex in one hand and the pliers in the other, push the power pin into the exposed wires of the LED Neon Flex with a steady amount of pressure until the clear plastic clip in the middle of the power pin meets the LED Neon Flex cut end.
What should I check before using my LED neon flex lighting?
Before using your LED Neon Flex lighting, you will need to check for any loose connections, exposed wires or damage to the outer jacket of the strip. If you spot any issues, you should not use the lighting. Finally, never operate the light with a voltage higher than the specified level.
How do I terminate the LED neon flex strip?
Once you have completed your run of lighting strips, you can terminate the LED Neon Flex by fixing an end cap over the exposed cut end, the other end will be where the power cord is connected. The Neon Flex strip should be positioned so that the exposed wires on the cut end are to the right-hand side.
How easy is neon flex lighting?
What is neon flex?
What equipment is needed to connect LED Neon Flex lighting?
How to put a power pin on a light strip?
What is the best sealant for external lighting?
How to terminate neon flex?
Where should neon flex be positioned?
See 2 more
Where do you cut neon Flex?
You must only cut the Flex on the housing in between each LED segment. Lengths of Neon Flex usually have marks on the silicone housing to indicate where it is safe to cut.
How do you pair neon Flex lights?
1:143:49You'll start with taking your two prong connector. And pushing it in to the metal cables encasedMoreYou'll start with taking your two prong connector. And pushing it in to the metal cables encased within the neon flex. Once you have your connector in carefully connect your power cable.
How long does neon Flex last?
The average life expectancy (in hours) for a neon glass tube is 10,000. LED neon flex lights, on the other hand, offer up to 30,000 or more hours of light.
How do you cut neon Flex strips?
In order to cut the strip with enough room to solder to it is best to first expose the cut line on the strip. To do this use a sharp razor blade and small snipping tool to cut a wedge out of the silicon cutting above the cut line. Disregarding this step can lead to a dead and non-conductive section of LEDs.
How does LED neon Flex work?
The light is produced by reactions with an inert gas that emit a fluorescent colour due to the release of energy. LED Neon signs are created with small light emitting diodes (LEDs) that are placed close together so that the light they emit overlaps to create a uniform glow.
What are neon Flex lights?
NEON FLEX is a family of linear neon LED that provides a versatile lamp source for the most interesting fixtures and applications. Vertical and horizontal flexibility lends itself to a variety of designs for both indoor and wet/outdoor lighting solutions.
Is neon Flex waterproof?
The LED Neon Flex tube is IP67 waterproof and therefore very resistant to water and moisture.
Do neon signs use a lot of electricity?
Neon is a very efficient form of lighting. The average cost of operating a neon sign 24 hours a day is around 20 cents a day, or less than the cost of running a 75-watt light. And because the sign doesn't get heated, leaving it on isn't a fire hazard.
Do neon signs need to be plugged in?
It turns out many people think they have to plug it in but don't worry, there's no electricity needed here. Neon lights work by releasing electrons which come together and make gas glow when excited with either electrical voltage or ultraviolet radiation.
How do you glue Neon Flex?
7:4622:56You apply this by wiping it on the back of your neon flex. And then you put the glue on the panel.MoreYou apply this by wiping it on the back of your neon flex. And then you put the glue on the panel. We do it in drops normally 20 to 25 millimeters apart.
How do you install LED Neon Flex?
How to connect LED Neon FlexStep 1: Cut the LED Neon Flex tube. ... Step 2: Attach connectors to LED Neon Flex strip. ... Step 3: Connect the power light pin. ... Step 4: Connect the power cable. ... Step 5: Ensure the light connection is safe.
Can you cut light strips and they still work?
Providing that you cut along the marked cut lines only, LED strips — including certain Hue lightstrips — will work after cutting. Many people experience issues with their light strips if they cut outside of these lines. The cut lines are also the safest place to cut LED strips, as the circuits here are closed.
How do you sync remote lights?
1:563:14Blue next all I do is hold the remote control to the receiver push. And hold the on/off. ButtonMoreBlue next all I do is hold the remote control to the receiver push. And hold the on/off. Button until that blue light flashes grapes are all synced up so we can turn the lights on now.
How do you pair neon?
Styling Neon Subtly. Pair your neons with neutrals for a balanced look. When styling neon, go with other neutral clothing if you don't want all eyes on you. Choose either light-colored neutrals like khaki and white or dark-colored neutrals like grey, brown, and black.
How do you sync light strips?
2:064:15So push and hold the button on the top light comes on blue press. And hold B on-off button on theMoreSo push and hold the button on the top light comes on blue press. And hold B on-off button on the remote. Until that flickers.
How do you connect party lights together?
0:373:25Make sure everything is lined up correctly. And then join them up together making sure it's a tightMoreMake sure everything is lined up correctly. And then join them up together making sure it's a tight tight fit and then screw up very tightly. Now this will allow you just to switch the lights. On.
How easy is neon flex lighting?
LED Neon Flex lighting is naturally simple to install and the design allows the tube to be easily cut to size, extended and bent into the correct shape . Here are the steps you need to follow to create the ideal LED lighting fixture.
What is neon flex?
LED Neon Flex lighting is ideal for both indoor and outdoor use, with it’s flexible yet robust design making it the perfect option for many spaces. These types of neon lighting strips are often used as an alterantive to traditional glass neon lighting, as the Neon Flex strip emits light from the top, bottom and side, makig them a popular alternative.
What equipment is needed to connect LED Neon Flex lighting?
Before you connect your lights, you will need to gather up the right tools and equipment. Firstly, you will need a few simple tools such as:
How to put a power pin on a light strip?
With the pliers in one hand and the lighting strip in the other, push the power pin onto the exposed strip pins. The clear plastic clip which is situated to the centre of the power pin will meet the cut end of the strip once it is correctly in place.
What is the best sealant for external lighting?
Silicone sealant is a great option for creating a more weatherproof seal. However, for additional waterproofing of external lighting, a heat shrink tube can be very useful. These can be placed at the connection joints and those which attach to the power cord so that the tube extends 3-4mm over the end of the flex lighting strip.
How to terminate neon flex?
Once you have completed your run of lighting strips, you can terminate the LED Neon Flex by fixing an end cap over the exposed cut end, the other end will be where the power cord is connected.
Where should neon flex be positioned?
The Neon Flex strip should be positioned so that the exposed wires on the cut end are to the right-hand side.
What is neon flex?
LED neon flex is a type of LED strip lighting made up of a series of Light-Emitting Diodes (LEDs) connected in a circuit and mounted on a strip. The word ‘flex’ refers to the fact that they are mounted on a flexible strip as opposed to a rigid one. Further, to protect the neon LEDs and the circuit board, LED neon flex lights are jacketed in a transparent PVC or silicone cover. These structural features make them highly versatile and easy to use.
Is neon flex good?
In many ways, LED neon flex lights represent the future of lighting. Not only are they eco-friendly but they deliver aesthetic value while offering users control options based on their preferences. To top it all off, they are affordable and durable as well. Simply put, with quality lights from a reputable LED neon flex manufacturer, your lighting experience will go from good to great.
How to install LED neon flex?
Then position the power cord over the end of the LED Neon Flex and align the rounded ends of the male power pin with the female pin openings in the power cord. Now push the pins into the power cord until a snug/tight fit is attained. If you wish to have a more weather tight seal, apply a continuous bead of silicone sealant around the perimeter of the LED Neon Flex prior to pushing it into the power cord assembly. Refer to our Outdoor Installation instructions.
What to do if you are off the mark on LED neon flex?
If you are off the mark the product can be damaged. It is imperative to use a very sharp cutting blade to make a straight cut. A sharp blade will help you avoid pulling the internal wires of the LED Neon Flex while making the cut. Stretching or pulling the wire may result in damaged or inoperable LED Neon Flex.
How to weatherproof LED neon connector?
Placing heat shrink tubing can provide additional weatherproofing at LED Neon Flex joint connections. Slide a piece of heat shrink tube over each connection point. Place the tubing evenly over the join area to be covered on the power cord. On all other connectors (end cap, X, T, L, Inside Corner, Outside Corner etc.) place the shrink tube so that it extends past the end approximately 1/8th of an inch. Once you have positioned the heat shrink tubing where needed, use a heat gun to shrink the tubing to wrap around the LED Flex Neon connection points.
How easy is neon flex lighting?
LED Neon Flex lighting is naturally simple to install and the design allows the tube to be easily cut to size, extended and bent into the correct shape . Here are the steps you need to follow to create the ideal LED lighting fixture.
What is neon flex?
LED Neon Flex lighting is ideal for both indoor and outdoor use, with it’s flexible yet robust design making it the perfect option for many spaces. These types of neon lighting strips are often used as an alterantive to traditional glass neon lighting, as the Neon Flex strip emits light from the top, bottom and side, makig them a popular alternative.
What equipment is needed to connect LED Neon Flex lighting?
Before you connect your lights, you will need to gather up the right tools and equipment. Firstly, you will need a few simple tools such as:
How to put a power pin on a light strip?
With the pliers in one hand and the lighting strip in the other, push the power pin onto the exposed strip pins. The clear plastic clip which is situated to the centre of the power pin will meet the cut end of the strip once it is correctly in place.
What is the best sealant for external lighting?
Silicone sealant is a great option for creating a more weatherproof seal. However, for additional waterproofing of external lighting, a heat shrink tube can be very useful. These can be placed at the connection joints and those which attach to the power cord so that the tube extends 3-4mm over the end of the flex lighting strip.
How to terminate neon flex?
Once you have completed your run of lighting strips, you can terminate the LED Neon Flex by fixing an end cap over the exposed cut end, the other end will be where the power cord is connected.
Where should neon flex be positioned?
The Neon Flex strip should be positioned so that the exposed wires on the cut end are to the right-hand side.
