how do you use nitromors paint remover

Here’s a quick summary of how to use Nitromors:

• Remove the overcap and prepare to fill it.
• Pour the Nitromors into the overcap (and immediately replace the cap on the Nitromors bottle).
• Apply a thick coat (2-3mm) onto the paint or varnish you want to remove, using a dabbing action to areas of up to 0.5m2.
• Leave for 5-10 minutes to allow the paint or varnish to blister and...

Full Answer

How do you apply Nitromors to paint?

You need to apply it with a stippling action and leave it to blister for 5 to 10 minutes. Once you see evidence of some action all over the surface you then have to stipple the Nitromors sitting on top of the blistered paint back down onto the paint layers below.

How long to leave Nitromors paint remover on for?

Now reapply another coat of Nitromors paint remover into the blistered paint and leave for about 30-40 minutes. It’s good to leave the work area to minimize getting in contact with fumes.

What is Nitromors all-purpose paint&varnish remover?

Their product named “Nitromors All-Purpose Paint & Varnish Remover” is still very popular and is being used by DIYers, painters, and professional contractors for removing many different kinds of paints, varnishes, and other coatings.

How do you stipple Nitromors?

Once you see evidence of some action all over the surface you then have to stipple the Nitromors sitting on top of the blistered paint back down onto the paint layers below. It won’t do it without help. This is the fundamental difference between the old and new formulations.

How do I use Nitromors?

Nitromors instructions Apply a thick coat (2-3mm) onto the paint or varnish you want to remove, using a dabbing action to areas of up to 0.5m2. Leave for 5-10 minutes to allow the paint or varnish to blister and then apply a second coat of Nitromors to the bolstered surface.

How do you use a paint striper?

0:331:37How to Video: How to use a Paint Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a plastic scraper. Begin to loosen and scrape away the finish the paint should begin to comeMoreUsing a plastic scraper. Begin to loosen and scrape away the finish the paint should begin to come off easily a stripping brush or steel wool are useful for any especially stubborn spots.

What has happened to Nitromors?

Nitromors was one of the most famous brands in the decorating industry. Then, due to EU legislation banning methylene chloride, it disappeared off the shelves.

How do you use multi strip paint remover?

0:241:03Multi Strip Professsional Safe Paint and Varnish Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou don't have to reapply multiple times to get the job done right. Pick up the paint. And varnishMoreYou don't have to reapply multiple times to get the job done right. Pick up the paint. And varnish remover the pros of use for years on places like the US Capitol the Pentagon.

What is the easiest way to strip paint?

The best way to remove paint stripper is with a plastic or bladed paint scraper. You also can use a putty knife and wire brush for hard-to-reach spots. Always guide the scraper at an angle.

How do you know when paint stripper is ready?

Depending on the strength of the product and the layers of paint this can take minutes or hours. If you see the stripper thinning out and starting to dry, apply a little more in those areas to keep it coated. Once the paint is thoroughly bubbled and starting to look like the picture here, it is ready to be scraped off.

How long do you leave Nitromors on?

Do not brush out. Only apply to areas up to 0.5m². When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes.

What do you do if paint stripper doesn't work?

Apply a generous amount. If it doesn't do the job in one hit, you can always give it a second go. Apply the stripping product with a brush then, after the recommended waiting time, remove it with coarse steel wool. This will help you cut into and remove the paint from the surface of the wood.

Is Nitromors safe to use?

Harmful by inhalation, in contact with skin and if swallowed. Harmful: possible risk of irreversible effects through inhalation, in contact with skin and if swallowed. Product will cause irritation or pain due to strong defatting action on skin. Will irritate eyes.

What is the best paint stripping product for wood?

The Best Paint Strippers of 2022Citristrip Paint & Varnish Stripping Gel.Best Overall. Smart Strip Advanced Paint Remover.Runner Up. Sunnyside 65732A Multi-Strip ADVANCED Paint & Varnish.Safety Pick. Safe 'n Easy Citrus Paint & Varnish Remover Gel.Fastest Working. ... Best for Wood. ... Best for Metal. ... Best for Concrete.More items...•

Do I need to neutralize paint stripper?

Paint stripper is a strong chemical that dissolves paint, allowing you to remove paint from a wall or other surface. However, once the paint is gone the stripper needs to be neutralized or it will stay on the surface and any further paint won't bond and will peel off.

What is the best product to strip paint from wood?

Best for Wood: MAX Strip Paint & Varnish Stripper This option from MAX Strip is free from methylene chloride, NMP, and other caustic chemicals but can still successfully remove paint from wooden items—even layers of paint.

What is nitromors varnish?

Nitromors is designed to remove paint and varnish without damaging wooden surfaces underneath. Even when Nitromors is used in thick layers (as instructed), wood should remain undamaged.

What is Nitromors?

Nitromors is a high-strength, all-purpose paint and varnish remover that’s designed for DIY use on wood, metal and masonry. It uses gel technology to break down and blister paint and varnish so that it can then be easily removed. It’s even water washable so that you can easily clean up after you’ve used it.

How long to leave nitromors on bolstered wood?

Leave for 5-10 minutes to allow the paint or varnish to blister and then apply a second coat of Nitromors to the bolstered surface.

What are the ingredients in Nitromors?

The main active ingredients of Nitromors previously included dichloromethane (which was the main ingredient) and methanol. However, the ingredients changed in 2009 when the EU introduced legislation banning methylene chloride – a solvent that Nitromors had previously used in their formulation. The current version of All Purpose Nitromors no longer contains dichloromethane.

How to remove blistered paint from a wall?

Remove the blistered paint or varnish using a scraper – or wire wool to remove any stubborn paint.

How to get the best results from paint?

To achieve the best results for your new paint, apply a primer to the surface first so that the paint can easily bond to it

What to wear when handling Nitromors?

Always wear protective gloves and safety goggles when handling Nitromors.

What is Nitromors paint remover?

Nitromors Paint and Varnish Remover is one of the most famous brands in the decorating industry. It has been around since the 1930s and has been used to remove many paints, varnishes and other coatings.

Can Nitromors be used on windows?

However, Nitromors is a non-drip gel consistency and can, therefore, be used on indoor vertical surfaces such as doors, stair spindles, and window frames etc.

Can you wrap paint in newspaper?

If you catch the Nitromors and paint in newspaper you can then wrap it up and dispose of it in an environmentally responsible manner. The whole process is a lot less intrusive than burning or sanding but should be done with the windows and doors open to provide good ventilation.

What is Nitromors paint stripper?

Nitromors All Purpose Paint and Varnish Remover is a fast acting, double strength paint stripper to make the removal of paint, varnish and lacquer quick and easy. It is suitable for use on wood, metal and masonry surfaces and the non-drip formula means it is perfect for vertical surfaces.

How many layers of paint can be removed from wood?

In a single application, 5 layers of paint can be removed within 50 minuets with the top coat blistering within 5 minuets. With just 2 - 3 applications, 15 layers can be removed from wood to bring it back to bare wood.

How long does it take for paint to blister?

Once paint is blistered (5 - 10 mins) apply second coat working into blistered paint. Do not attempt to remove paint yet, leave around 40 mins for it to work. Then remove blistered and soft paint with a scraper or shave hook.

How to score paint on recessed paint?

Rough it up with a wire brush, use a scraper to remove/score the paint. Run the scraper along the edges, top, bottom and sides. Use the corner of the scraper to score the paint inside the vertical recessed bits.

Can I use All Off for smooth coat?

All off for fresh smooth coat. If removing paint from metal, I would recommend this product.

Can you scrap paint off a front door?

I bought this to strip a front door with several layers of paint, it works but requires several goes, I would say dont be tempted to scrap it off too early, leave it a bit longer then advised, it worked much better, buy more than you think you need too! And use a scrap hook. I also tried Home Strip and Nitomors was way better.

Is varnish remover tough on wood?

This all purpose paint & varnish remover is tough on paint & kind to wood. An ideal solution for your DIY projects.