Use QUIKRETE® PowerLoc jointing sand in place of play sand to simulate mortar joints. Sweep the polymer-modified sand into the joints, mist with water, and Powerloc will harden in place. Coloring gives molded concrete a more natural looking finish and is great for blending your path or walkway into your landscape design.
What is polymeric jointing sand?
Polymeric Jointing Sand. QUIKRETE® HardScapes Polymeric Jointing Sand (No. 1175-56) is a polymer-modified graded sand for filling joints up to 2” wide between interlocking pavers, brick, natural stone and concrete slabs. Simply sweep the sand into the joints and saturate with a water mist.
What kind of sand do you use for pavers?
PowerLoc™ Jointing Sand QUIKRETE® PowerLoc™ Jointing Sand is a polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once PowerLoc™ Jointing Sand is swept into the paver joints and dampened with a water mist it hardens, locking pavers into place.
What is powerloc jointing sand?
QUIKRETE® PowerLoc™ Jointing Sand is a polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once PowerLoc™ Jointing Sand is swept into the paver joints and dampened with a water mist it hardens, locking pavers into place. Designed for commercial or homeowner applications.
How do I apply modified sand to my joints?
Simply sweep the sand into the joints and saturate with a water mist. The polymer modified sand hardens as it dries and resists erosion, weed growth and insects.
How do you use quikrete polymeric jointing sand?
1:565:20How to use Polymeric Sand - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep 1 clean the surface with broom. And blower to remove all dust and debris from the surface. StepMoreStep 1 clean the surface with broom. And blower to remove all dust and debris from the surface. Step 2 open the bag and spread the sand evenly over the surface.
How do you use quikrete patio paver jointing sand?
APPLICATION – Jointing Sand Replace the paver and tap with a rubber mallet or similar tool until the paver is level with the surrounding pavers. Sweep QUIKRETE ® Patio Paver Jointing Sand into the paver joints. Dampen the sand with a fine spray. Repeat as needed to completely fill the joints.
How do you lay jointing sand?
Pour the sand onto the pavers and sweep it into the joints. Using a broom handle or some other blunt object, tap on the pavers. This will cause the sand to consolidate. Sweep more sand into the joints until the sand is within 1/8” of the top of the paver.
Does quikrete jointing sand Harden?
QUIKRETE® PowerLoc™ Jointing Sand is a polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once PowerLoc™ Jointing Sand is swept into the paver joints and dampened with a water mist it hardens, locking pavers into place.
What is the best sand to put between pavers?
Polymeric sandPolymeric sand is a material used to fill paver joints, the empty spaces found between each paver, tile or natural stone. It is sometimes called jointing sand, paver sand or hardscape sand.
When should you not use polymeric sand?
1. Polymeric sand hardens quickly. This can be a benefit—you don't have to worry about it creating a mess that you can't get rid of, and it makes the finishing process simple. However, you should NEVER install polymeric sand when it is raining!
Why is my polymeric sand not hardening?
If your polymeric sand didn't harden up, it's pretty much guaranteed there's a moisture issue. If the joints remain wet after the installation, they will remain soft until they dry. So getting one initial complete drying "set" is very important to the long-term performance and lifespan of the product.
How long does polymeric sand need to set before rain?
Most poly sands are considered “rain proof” after one hour, but I wouldn't bet the bank on that. You really want at least 24 hours of warm, dry air to ensure that the poly sand completely sets. Sustained dampness prior to setting may damage the poly sand to the point it will never set.
Does water drain through polymeric sand?
Polymeric sand, if installed properly, will harden to lock you pavers in place and create a more effective weed and insect deterent while still allowing water to drain freely.
What if it rains on polymeric sand?
Installing polymeric sand on a damp or wet surface could cause the sand and polymers to stick to the surface and become difficult to remove. After installation, a hard rain on polymeric sand that has not fully set up could result in polymeric sand all over the top of the pavers.
Should you wet paver sand?
#1 - Damp Pavers or Joints You must ensure that the pavers and joints are completely dry before installing polymeric sand. If there is any moisture present, it will cause the polymers to prematurely activate, leaving a haze on the surface or the sand won't set up properly.
How do you keep sand from washing between pavers?
You can protect the joint sand from washing out by sealing the paver surface. Sealing restores the beauty of your pavers. The paver sealer also serves as glue between the joint sand particles hence holding them together, and preventing the sand from being washed away when it rains or during pressure washing.
What is the difference between paver sand and polymeric sand?
Polymeric sand is the more reliable and durable option for filling in the paver gaps. It outperforms regular sand when a homeowner is looking to lock the paver joints properly and wants a steady and stable path. It also provides a better appearance with its cleaner look and availability in varied colors.
Is quikrete paver sand polymeric?
QUIKRETE® HardScapes Polymeric Jointing Sand (No. 1175-56) is a polymer-modified graded sand for filling joints up to 2” wide between interlocking pavers, brick, natural stone and concrete slabs.
Can you use quikrete to set pavers?
Tap and level the pavers in place with a rubber mallet. Fill the joints with either QUIKRETE PowerLoc Jointing Sand or QUIKRETE HardScapes Polymeric Jointing Sand to hold the pavers in place. TIP: QUIKRETE PowerLoc Jointing Sand is recommended for paver joints of up to ½ inch wide.
What is quikrete paver sand?
QUIKRETE Patio Paver Sands are properly graded aggregates for the installation of patio pavers. Used as an underlayment to provide a firm, stable base for interlocking pavers, flagstone, brick and patio block. Spread patio paver sand to a depth of 1 to 2 inches over the compacted base. Dried sand.
Comes in a rich array of colors
Once considered as a mere “filler”, jointing sand is now available in a wide variety of colors to add aesthetic value to your paving project. That’s why there’s a tool on every Unilock paver web page that lets you play with different shades of jointing sand – so you can envision what the finished product will look like. See for yourself.
Not right for all paving stones
It’s important to note that polymeric jointing sand is not recommended for all paving stones, particularly those that are heavily textured such as Il Campo or Series. The deep grooves can trap the polymer particles.
