How To Use Spot Putty
- Apply Putty. Properly mix your putty and make sure it’s the right consistency. Spread evenly over the problem area and apply thinly using a plastic spreader.
- Practice. Remember that less is more and don’t be afraid to practice. ...
- Avoid the Bullseye. Many beginners make the all too easy mistake of using build up spot sandpaper to featheredge spot putty.
What is spot putty used for?
Bondo Glazing & Spot Putty is a 1-part putty that fills imperfections, pinholes in body filler, scratches, paint chips and minor dings. Can be used with other auto body repair materials.
How do you use glazing and spot putty?
How to Use Glazing & Spot Putty 1 Select the glazing and putty compound you will use. You can find compounds at your local auto parts store. 2 Once you have selected a glazing putty, you must prepare your area. Be sure that your glazing compound, rags and putty knife are available. 3 Prepare the surface you will be working on. ... More items...
Can you use spot and glazing putty on body filler?
This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces. About the 3M™ Body Repair System
Can you use glaze putty over primer?
You can use glaze putty over primer. I know a lot of people use it during priming, but go ahead and use it in body filler. Spray some Guide Coat or put the Dry Guide Coat on there. It comes in two different methods and it just helps you identify any lows or things like that before you get to the priming stages.
What is the purpose of spot putty?
This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces.
Can I use spot putty without hardener?
Applying Spot Putty It is very easy to sand, dries fast and doesn't need a hardener to cure. You can just apply it from the tube. I usually use Glazing & Spot Putty by 3M. Use a plastic spreader to put a thin coat of spot putty on the sanded area.
How long does it take for spot putty to dry?
Unlike many 2-part putties which can require longer to dry, Bondo Glazing & Spot Putty is sandable in as little as 30 minutes. It is non-staining, so it won't affect the color of paint or finishes around the repair area.
What is the difference between body filler and spot putty?
“The difference between putty and filler is basically the “talc” in the product. Most of our Rage line of fillers have Eco-Resin technology. With that, we use similar ingredients to putty. Therefore, when using it, the putty is no longer necessary in the repair process.”
How thick can you apply spot putty?
Filler should not be applied more than 1/4″ thick, any more and there is a risk it will crack. With that said, any damage less than 1/4″ deep may not need to be hammered out.
Can you put spot putty over primer?
Glazing putty can be mixed up and applied with a razor blade over pinholes in body filler or primer. Simply force the glazing putty into the holes as you spread it over the effected area. This should leave just the holes filled and very little filler on the surface.
Can Spot Putty get wet?
It's waterproof. Glaze has better adhesion properties to handle non bare metal and even painted surfaces. Filler is primarily for bare metal. So yeah, the talc in the filler will absorb a little water.
Do you need to prime Bondo glazing and spot putty?
5:009:11Priming Bondo. Cabinet Painting Tips. - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut once again um do you need to prime over your bondo. No but if you're concerned about coverage.MoreBut once again um do you need to prime over your bondo. No but if you're concerned about coverage.
Can you use spot putty on paint?
Spot repairs and other small repairs to auto body panels can be done with this spot and glaze putty. You can use it to fill pinholes in body filler as well as to cover minor scratches on metal, fiberglass, and wood, as well as to paint and prepare sanded, primed, or sanded and painted surfaces.
How do you use spot putty and glaze?
0:301:58Glazing & Spot Putty Application - YouTubeYouTubeStart of suggested clipEnd of suggested clipStep use 180 grit sandpaper or finer to prepare the surface remove the dust. And clean the area. TheMoreStep use 180 grit sandpaper or finer to prepare the surface remove the dust. And clean the area. The surface must be completely clean and dry before applying the glazing and spot putty.
What is the easiest body filler to use?
Polyester Glaze Polyester glazes can be used to fill scratches and very small dents. They can be applied over bare metal, fiberglass, other fillers, and cured 2K Coatings. They are thin and easy to work with.
Can you paint over glazing putty?
The glazing must set a skin for at least 7 -14 days before you can prime and paint. The glass should be cleaned so that all of the putty oils are removed. It is important that in painting the glazing, the paint flows onto a small part of the glass to make a weather tight seal.
Where do I want to use spot putty?
Most common surface problems for spot putty service are smaller paint chips or pits caused from oxidation. Sanding marks or scuffs that are imperfections that might stick out like sore thumbs on your new paint.
Apply Putty
Properly mix your putty and make sure it’s the right consistency. Spread evenly over the problem area and apply thinly using a plastic spreader. Keep the mixture and application thin, and work in fast and sport strokes. Because putty is fast acting and will cure quickly, make sure to go over the area and work quickly.
Practice
Remember that less is more and don’t be afraid to practice. The better you become at how the putty reacts and it’s viscous properties, the easier you will apply and cure your putty.
Avoid the Bullseye
Many beginners make the all too easy mistake of using build up spot sandpaper to featheredge spot putty. While this seems good in principle, it creates a tapered effect and can lead to a depression that’s commonly referred to as the bull’s-eye.
What is two part glazing putty?
Two-part glazing putty is already combined with a hardener and will therefore not absorb any other products you are working with. This will prevent the compound from swelling from absorption and then shrinking as it dries.
How long does it take for glazing putty to dry?
Allow the glazing putty to dry. If you are using a two-part (catalyzed) glazing putty, this should not take longer than an hour. If you are using one-part, it can take up to a day. Using a fine grit sandpaper (320 or up) sand the area once again, taking care to keep the sandpaper level and pressure applied equally.
How to prepare a glazing area?
Be sure that your glazing compound, rags and putty knife are available. Arrange the sanding material and spray-on primer in an organized fashion around your work area .
What is spot and glazing putty?
This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded ...
What is bondo putty?
Big Benefits for Smaller Auto Repairs#N#Applied directly from its easy dispensing tube, Bondo® Glazing & Spot Putty is formulated for quality auto body repairs in less time. Its 1-part nitrocellulose formula eliminates mixing and helps to keep small vehicle repairs simple, efficient and on schedule. It is non-staining, so it won't affect the color of paint or finishes around the repair area. It also shrinks very little over time, helping to ensure lasting repairs without rework.#N#This spot and glazing putty is ideal for spot repairs and other small repairs to auto body panels. Use it for filling pinholes in body filler as well as for covering minor sand scratches, and more on metal, fiberglass and wood as well as sanded and primed or sanded and painted surfaces.#N#About the 3M™ Body Repair System#N#Even a small repair can seem complex at first. So 3M's Body Repair System simplifies the entire automotive body repair process by dividing it into four stages: