Achieve a beautiful and unique multi-speckled textured finish on your horizontal concrete & masonry surfaces with BEHR PREMIUM ® Granite Grip. For Best Results: Before applying, it is essential to have a properly cleaned and prepped surface. Must apply with 1/4" Adhesive Roller Cover or Texture Sprayer.
How do I apply Behr premium ® granite grip?
Achieve a beautiful and unique multi-speckled textured finish on your horizontal concrete & masonry surfaces with BEHR PREMIUM ® Granite Grip. Before applying, it is essential to have a properly cleaned and prepped surface. Must apply with 6.4 mm (1/4") Adhesive Roller Cover or Texture Sprayer. A minimum of 2 coats is required.
Can I use Behr paint on a concrete patio?
I used the paint on the concrete and it looks great and no signs of wear or breakdown at this point. Concrete patio after painted with Behr Granite Grip paint | Pinterest ... Concrete patio floor after Behr Granite Grip paint ... Do you have an ugly painted concrete floor like this one and you would like to ....
Does granite grip stick to concrete?
Well, it's not as easy as they make it to look. The granite grip is so thick, hard to spread, does not stick to concrete like they said it would. I used this on my porch and put 3 coats but still looks kind of patches in some areas.
How do you fix bubbles in granite grip?
I patched the area with paintable caulk and brushed on a few layers of Granite Grip. Of course, I allowed each coat to dry for 24 hours. The third area where I had a problem is one that puzzles me. I’m not sure what I did wrong, but I do have a theory about what caused the bubbles. This localized area was right beside an expansion joint.
See more
What temperature should you put granite grip on?
between 50-90° F.Use product when air and surface temperatures are between 50-90° F. Do not apply in direct sunlight. Required application tools: 1/4" adhesive roller cover, nylon/polyester brush, synthetic stain pad or texture sprayer.
What does granite grip do?
BEHR Premium Granite Grip is a unique decorative, slip-resistant, drivable concrete floor coating. It helps renew and provide a unique multi-speckled finish. This durable protective coating is formulated to resist dirt, grease, household stains and hot tire pick-up.
Can you use granite grip over painted concrete?
0:302:47Review of the Behr Concrete Paint "Granite Grip" - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it didn't have a brushed finish. So he had to use a concrete edge. Before we could put this downMoreSo it didn't have a brushed finish. So he had to use a concrete edge. Before we could put this down to give it some texture for the material to grip to but if you follow the instructions.
Are Behr granite grips slippery?
Ideal for horizontal surfaces such as: Garage Floors, Driveways, Walkways, Patios, Porches and Pool Decks. Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.
What kind of roller do you use for granite grip?
Achieve a beautiful and unique multi-speckled textured finish on your horizontal concrete & masonry surfaces with BEHR PREMIUM® Granite Grip. For Best Results: Before applying, it is essential to have a properly cleaned and prepped surface. Must apply with 6.4 mm (1/4") Adhesive Roller Cover or Texture Sprayer.
Will granite grip stick to wood?
Granite Grip can be used on wood, but ease of application, effectiveness, and final look are much less reliable because wood is smoother, more flexible, and more often installed as individual planks. Behr will not honor the product warranty when it is used outside of the prescribed manner.
Can you pressure wash Behr granite grip?
Soap & water clean-up. Wait at least 30 days before rinsing or cleaning. Use a mild detergent as needed. Abrasive cleaners and pressure-washers should be used carefully to avoid premature coating failure.
How do you remove Behr granite grip from concrete?
For Previously Coated Surfaces: For a painted surface in sound condition, use a product to clean and prepare the surface. If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces.
What is the best paint for a concrete driveway?
The best kind of paint to use on a concrete floor is epoxy paint because of its durability. You can also use latex paint, though it won't hold up as well as epoxy. Acrylic paint also works well, especially for exterior concrete walls as it can withstand harsh weather.
What is the best coating for a garage floor?
Top 5 Garage Floor CoatingsBest Paint Kit: Rust-Oleum RockSolid Polycuramine Garage Floor Kit.Best Value: KILZ One-Part Epoxy Acrylic Interior/Exterior Concrete and Garage Floor Paint.Best Epoxy Kit: Colored Epoxies 1002 Clear Epoxy Resin Coating.Best Concrete Sealer: Siloxa-Tek Penetrating Concrete Sealer.More items...
Is granite grip good for garage floors?
Another durable option for weathered concrete is Behr Granite Grip which is ideal for garage floors, patios, and porches.
How do I make my concrete floor look like granite?
How to make concrete countertops look like granite? You can use a countertop paint kit like the Sicilian Sand kit to create the look of granite. Another method is to use stone texture spray paint to create the granite look. This can be applied after the concrete is cleaned and primed with concrete base paint.
What does honing do to granite?
What is Honed Granite? When you choose a honed finish, the polishing process ends before buffing to create a matte or low-gloss sheen that lacks the highly reflective, mirror-like look of traditional granite. The softer honed finish is popular among homeowners wanting a casual or aged look.
Is honed finish more expensive?
7) Honed granite is more expensive than polished granite This is mainly due to the grinding process. Most people would think that polished granite would cost more due to the extra work it takes to make it. However, that's not the case. The reason why honed granite costs more is because of its availability.
What are the different types of finishes for granite?
The four most popular finishes for granite countertops are honed, polished, flamed, and leathered.
How do you get stains out of honed granite?
A simple paste of baking soda and water is a good place to start. Mix it to a thick, spreadable consistency, apply it to the stained area, and rub it gently with a sponge or a soft-bristled brush.
How long is Behr Process Corporation warranty?
WARRANTY. For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How long does Behr warranty last?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How to push coating outwards?
Apply moderate pressure to the roller to push the coating outwards and even out the surface.
What is the best product to clean and etch a surface?
Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured profile similar to 150 grit sandpaper.
How long does granite grip take to dry?
After the caulk had cured for 24 hours, I applied Granite Grip and allowed each layer to dry in 24 hour intervals.
Can I apply second coat of concrete in direct sunlight?
In one area, I had applied the second and third coats in direct sunlight. That’s a no-no, and I believe that prevented the second coat from adhering properly to the base coat. In that area, the base coat was still firmly attached to the concrete.
How to use 3mm adhesive roller?
Use the 3 mm Adhesive Roller Cover in the center of the section and roll outwards in random directions. Rough surfaces 4 - 5 m 2 / Smooth surfaces 5 - 6 m 2
What is the best product to clean and etch a surface?
Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured profile similar to 150 grit sandpaper.
How to check for residue on a sandpaper?
Check for residue by swiping your hands across the surface. Repeat rinse if residue is present.
