Maximize your carpet cleaner’s performance with BISSELL Oxy Boost Carpet Cleaning Formula Enhancer. Simply add to your tank along with formula and clean like you normally would. The oxygen in the enhancer creates a reaction with the stain on contact to remove even tough, set-in stains.
What is Bissell oxy boost carpet cleaning formula enhancer?
Maximize your carpet cleaner’s performance with Bissell Oxy Boost Carpet Cleaning Formula Enhancer. Simply add to your tank along with formula and clean like you normally would. The oxygen in the enhancer creates a reaction with the stain on contact to remove even tough, set-in stains.
How do I add Bissell 2X formula to my tank?
Using the marks on the inside of the formula cap, add 7 oz of BISSELL 2X formula to tank. Hold the tank so the top is level and use a permanent marker to mark the new "add water" line Add water to the tank until you reach the original formula fill line. The next time you fill your tank, use the new fill lines instead of measuring the formula.
Can I use oxygen boost with the spotclean?
Made especially to get the very best results from the SpotClean, Oxygen Boost can also be used in the Oxy PowerTool with upright carpet cleaners, or manually as a pre-cleaner for laundry stains, simply added to a load of white laundry to boost the power of your powder. Not suitable for use on velvet, chenille, silk, dralon or leather.
What is Bissell's new generation cleaning solution?
BISSELL's new generation cleaning solution deeply penetrates to thoroughly remove marks and reinvigorate carpets. BISSELL's new generation cleaning solution deeply penetrates to thoroughly remove marks and reinvigorate carpets.
See more
How do you use the Bissell Pet Oxy Boost?
1:395:37Oxy Boost Pre-Treatment & Cleaning Demo | BISSELL® SpotClean ...YouTubeStart of suggested clipEnd of suggested clipSo either pick yourself up some of the pre-treat spray and use that or you can use your oxyboost. SoMoreSo either pick yourself up some of the pre-treat spray and use that or you can use your oxyboost. So what i'm going to do is just add the oxyboost onto the stain.
Can you use Bissell oxygen boost on its own?
Q: Is this meant to be used on it's own or is it to be used in combination with the deep cleaning formula or Spot and Stain? It is meant to be used directly on stains.
What does Bissell boost do?
Maximize your carpet cleaner's performance with BISSELL® PET OXY Boost Carpet Cleaning Formula Enhancer. Simply add to your tank along with formula and clean like you normally would. The oxygen in the enhancer creates a reaction with the stain on contact to remove tough pet stains and odors.
How do you use the Bissell carpet cleaner solution?
0:001:37How to Use the BISSELL Big Green® Machine Professional Carpet CleanerYouTubeStart of suggested clipEnd of suggested clipTake the clean water tank to your sink and fill with hot tap water to the waterline add two capfulsMoreTake the clean water tank to your sink and fill with hot tap water to the waterline add two capfuls of Bissell solution using the built-in measuring cap. There are many solutions to fit your cleaning.
Can I use Dawn in my Bissell carpet cleaner?
No, you can't use dish soap as a substitute for a carpet cleaner. Dish soap leaves a residue on your carpet fibers, which attracts dirt and makes your carpets appear old faster. This is because, unlike dish soaps, most carpet cleaners are not foaming liquids.
Can I use vinegar and water in my Bissell carpet cleaner?
White vinegar can be used as a household cleaning product to clean just about any surface. Fortunately, you can even use it in a Bissell carpet cleaner. To use, pour one cup of white vinegar into the Bissell's reservoir tank. Fill the tank the rest of the way with hot water.
How do you use Oxy spot stain?
0:080:51Our Point of View on Bissell Professional Spot + Oxy Formula ...YouTubeStart of suggested clipEnd of suggested clipSo i just spot clean that and scrub it out a little bit agitate. It suck up the water and the stainMoreSo i just spot clean that and scrub it out a little bit agitate. It suck up the water and the stain is gone.
How much Bissell Spot and Stain do I use?
Add 2 oz of BISSELL 2X Formula to the tank Measure 4 oz (2 capfuls) and pour into tank. Fill the clean water/solution tank with hot (not boiling) tap water to the WATER fill line Add formula to the indicated fill line (approximately 0.5 oz) on the solution tank.
How do you use a carpet cleaner step by step?
1:153:30How to Use a Carpet Shampoo Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trigger injects cleaning solution into the carpet. And start the suction. Pull the nozzle slowlyMoreThe trigger injects cleaning solution into the carpet. And start the suction. Pull the nozzle slowly backwards across the surface. Move in overlapping lines across the carpet. Until it's all done.
How do you use OxiClean in a carpet shampooer?
0:080:50How to Remove Carpet Stains with OxiClean™ VSR - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe stain. And allow it to stand for one to five minutes without allowing the solution to driveMoreThe stain. And allow it to stand for one to five minutes without allowing the solution to drive block with a clean towel to remove excess.
How long does it take for carpet to dry after using Bissell?
approximately 2-4 hoursHow long does it take carpets and upholstery to dry after carpet cleaning? On the average, it will take approximately 2-4 hours for carpet and upholstery to dry after being carpet cleaned. To expedite the drying process, you will want to use a fan and increase your air circulation.
How much carpet cleaning solution do I need?
You will want to follow the machine directions. So if it has a fill line or formula cup you would use that. Otherwise we suggest using 6 oz of carpet shampoo to a gallon of water. How much product you need depends on how much liquid the machine disperses, how many times the carpet needs to be cleaned, etc.
Do I have to use Bissell solution?
A: You don't have to use the Bissell solution, but it is optimized for use in their machines. This means it won't streak, leave residue, need to be rinsed, or leave buildup in your machine.
How much cleaner do you put in a carpet cleaner?
For typical carpet shampoo machines, fill your reservoir with hot water. Then pour 1/4 cup of this concentrated solution into your water filled reservoir. (**The ratio I use is about a gallon of hot water to 1/4 cup of this concentrated cleaning solution.)
How much cleaning solution do I use for a little green machine?
Measure 4oz. of formula (2 capfulls) and pour into tank. Fill the clean water/ solution tank with hot (not boiling) tap water to the WATER fill line. Replace and tighten black cap.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Climate Pledge Friendly
Climate Pledge Friendly uses sustainability certifications to highlight products that support our commitment to help preserve the natural world. Time is fleeting. Learn more
From the manufacturer
Maximize your carpet cleaner’s performance with Bissell Oxy Boost Carpet Cleaning Formula Enhancer. Simply add to your tank along with formula and clean like you normally would. The oxygen in the enhancer creates a reaction with the stain on contact to remove even tough, set-in stains. It’s a difference you can see.
