Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.
What is revolved boss in SolidWorks?
Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.
How to use the revolved boss/base feature?
You can access revolved boss/base from both command manager and menubar. Like the SolidWorks extrude boss/base feature, you can also add materials in one or two directions, while revolving it.
How to revolve boss base in AutoCAD?
Step1: Draw a closed contour/shape/region ,you wish to revolve, in a sketch on a plane. For example, let’s take a circle. Then draw a centerline/axis about which your shape will revolve. Step2: From Command manager, in Features tab, select Revolved Boss Base, you will see something as shown below:
What is the revolve feature in SolidWorks?
In the last couple of weeks, I started to share a video series of the most common SolidWorks features. In the previous videos, we have covered the Loft feature, the Boundary feature, and the Sweep feature. Today we will take a closer look at the Revolve feature. This feature is used to revolve a 2D sketch along an Axis or Centerline.
How do you use revolved boss base?
Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.
How do you use the revolved boss in SolidWorks?
How to Use Revolved Boss/Base Command in Solidworks?Click on Revolved Boss/Base command in the Solidworks® interface. ... Select proper contour for Revolve operation in Solidworks®. ... Select revolve axis. ... Select a revolving method. ... You can select direction 2 for revolving operation in Solidworks®.More items...•
How do you use the swept boss base in SolidWorks?
1:098:40SolidWorks Swept Boss/Base | Swept Cut Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd create the profile you want to swipe. I will create one Center rectangle. Select then ok thenMoreAnd create the profile you want to swipe. I will create one Center rectangle. Select then ok then click on again features click on shift buzz base. And select the profile rectangle.
How do you use revolve Extrude in SolidWorks?
Creating Extruded or Revolved Cuts as Assembly FeaturesOpen a sketch on a face or plane, and sketch a profile of the cut. ... Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.Set the options as needed in the Extrude or Revolve PropertyManager.
What is revolved boss?
Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it. You can access revolved boss/base from both command manager and menubar.
What is revolve command in SolidWorks?
Much like the Extrude command, the Revolve feature creates geometry from a sketch. However, the Revolve requires one more ingredient, the Axis of Rotation. Once you have a sketch, the next element is the center line, axis or internal line, of the sketch. Here's a few examples.
What is lofted boss base in Solidworks?
A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points. All sketch entities, including guide curves and profiles, can be contained in a single 3D sketch.
How do I swept my boss?
In this tutorial you will create swept part using Swept Boss/Base tool.Click New. ... Click Top Plane and click on Sketch.Click Circle and sketch a circle origin as it center. ... Exit Sketch.Take a plane normal to spline end (or Click on Front Plane and click Sketch.)Click on View Orientation-Normal To.More items...•
What is required to create a solid using the swept boss base tool?
There are two main requirements to create a Swept Boss or Base: A closed profile and a path. This first example will show how to create a sweep using a circular profile and an open relatively linear path. Figure 1, below, shows the profile drawn on the front plane and the sweep path drawn on the top plane.
What is revolved boss in SolidWorks?
Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.
How do you extrude bosses in SolidWorks?
Extrude PropertyManagerCreate a sketch.Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.
Why can't I revolve SolidWorks?
Unless you're creating a Thin Feature Revolve then SolidWorks can only Revolve a closed profile. This means that you need to have no gaps or breaks around the outside of your profile. Try using an Extruded Boss/Base to check whether your profile is closed.
How do you draw a revolve in SolidWorks?
0:143:51SolidWorks Revolved Boss Base - 9 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd one arc three-point arc then trim unwanted entities sketch need to be closed shape then defineMoreAnd one arc three-point arc then trim unwanted entities sketch need to be closed shape then define the axis of revolution using centerline about which axis you want to revolt.
How do you extrude bosses in SolidWorks?
Extrude PropertyManagerCreate a sketch.Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.
How do you use Hole Wizard in SolidWorks?
You can use the Hole Wizard to create customized holes of various types. To create hole wizard holes, create a part and select a surface, click Hole Wizard (Features toolbar) or Insert > Features > Hole > Wizard, set the PropertyManager options, and click .
What is boundary boss in SolidWorks?
SolidWorks Boundary Boss or base is tool used to create feature by adding material in two directions. That means, you can add materials between two profiles between two boundaries. Loft boss is also like Boundary Boss feature, but it adds materials between two profiles.