The Shark Navigator Lift-Away Zero-M Speed has 2 settings for cleaning. -For bare floors and delicate area rugs: Press the power button on the vacuum pod to turn on suction and select setting I, Hard Floor. Tilt the handle back while you gently step on the cleaner head. Note that the brushrolls will spin slowly in this mode.
How do I store the tools on the shark navigator lift-away?
The Shark Navigator Lift-Away was designed to hold the short crevice tool and dusting brush on board the vacuum so you have quick access to these at your fingertips. A specially designed accessory tool holder keeps these on the extension wand of the vacuum. How do I attach the accessory tool holder and store the on-board tools?
What is included with the shark navigator lift-away?
It includes a dusting head with a removable microfiber pad and extension wand which connect on to the handle of the Shark Navigator Lift-Away.
Is the shark navigator lift-away professional nv356e better than the nv352?
Shark Navigator Lift-Away Professional NV356E: The Shark Navigator NV356E retails for about $200, but when we tested it against the NV352, we didn’t see much of a difference. Since they both have 10-amp motors, the vacuums have an equal amount of power.
How do you use the shark navigator backsaver wand?
The BackSaver Wand connects the handle of the Shark Navigator Lift-Away vacuum with the bare floor nozzle and is simply activated with the push of a div. The powerful suction and low-profile bare floor nozzle makes for fast and easy pickup of dust and debris underneath furniture.
How long does it take to put together a Shark Navigator?
What is Shark Navigator?
How much does a Shark upright vacuum cost?
What tools does the Navigator NV352 use?
How much does a Shark Navigator weigh?
How much does a Navigator NV352 weigh?
Does Shark Navigator have a vacuum?
See 2 more
Where is the lift away button on Shark Navigator?
0:141:18How to vacuum in Lift-Away® mode with your Shark Navigator® Zero-M ...YouTubeStart of suggested clipEnd of suggested clipSo that you can easily clean in hard-to-reach areas to activate lift away and detach the canisterMoreSo that you can easily clean in hard-to-reach areas to activate lift away and detach the canister from the cleaner head simply press the lift away button on the bottom side of the pod underneath.
What is the lift away button on shark vacuum?
Our Powered Lift-Away feature allows you to remove the pod from the nozzle while maintaining the same power you have in upright mode. This is great for cleaning stairs, under furniture, and in other tight spaces.
How do you adjust the suction on shark lift away?
0:151:00How to adjust floor modes with your Shark® Rotator® Lift-Away ...YouTubeStart of suggested clipEnd of suggested clipSlide 2 min to increase maneuverability on carpets. Slide 2 max to increase suction on bare floors.MoreSlide 2 min to increase maneuverability on carpets. Slide 2 max to increase suction on bare floors. For additional support go to shart clean com.
How do you work a shark vacuum?
0:002:27How to Use Shark DuoClean Vacuum Cleaner - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe top position is for thick carpets or rugs. Slide the surface switch to the middle for low pileMoreThe top position is for thick carpets or rugs. Slide the surface switch to the middle for low pile carpets. Slide the surface switch to the bottom.
What is the difference between Lift-Away and powered lift away?
1-2 of 2 Answers We would like to let you know with a unit that is a Powered Lift-away it allows you to use the floor nozzle attached to the wand while in the lift-away mode. With a unit that is just a lift-way you would not be able to use the floor nozzle attached to the wand.
What is Lift-Away on a vacuum?
Its 'Lift-Away' design lets you pick up and carry its canister with one hand while vacuuming with its wand, which helps clean smaller spaces.
Why is my Shark lift away so hard to push?
Suction too high If the vacuum is hard to push, the suction could be too high. Make sure the power button is on the right setting for the respective surfaces. Position I is for bare floors and position II for carpets and rugs.
How do you adjust the suction on a Shark Navigator vacuum?
0:110:56How to adjust floor modes with your Shark Navigator® Swivel Pro ...YouTubeStart of suggested clipEnd of suggested clipSlide 2 min to increase maneuverability on carpets. Slide 2 max to increase suction on bare floors.MoreSlide 2 min to increase maneuverability on carpets. Slide 2 max to increase suction on bare floors. For additional support visit shark clean com.
Why is my vacuum so hard to push?
The brush is jammed One of the most common reasons for a vacuum being too hard to push is because the rotator brush is jammed. This usually happens when fibres get stuck around the brush, preventing it from rotating. These fibres are typically loose hairs, pieces of string or cotton, or particularly big pieces of lint.
Why is the brush on my shark lift away vacuum not spinning?
If the vacuum's floor roller is not spinning, the vacuum simply may not know that you want it to be rolling. Make sure that the power switch is in position II “Brush Roll On.” If the vacuum is not in this setting, the floor roller will not turn.
Why is my shark vacuum not working?
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
Where do the accessories go on a shark vacuum?
0:401:02How to assemble your Shark® Rotator® Lift-Away® with Self-Cleaning ...YouTubeStart of suggested clipEnd of suggested clipThe lift away button then attach your accessories to the accessory holder located by the bottom sideMoreThe lift away button then attach your accessories to the accessory holder located by the bottom side of the pod.
Can you adjust the height of a shark vacuum?
Some vacuums have a knob for height adjustment, but Shark vacuums don't have one. Instead, you can just choose between bare floor and carpet settings from the control panel located at the top portion of your appliance.
Can shark vacuum clean under bed?
The vacuum quickly and easily cleans the following areas in your entire home: carpets; rugs under bed, couches, and tables; bare floors; draperies; upholstery; ceiling fans; and everything in between.
How do you use shark vacuum on stairs?
0:083:07Shark powered lift away stair cleaning - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you just hook this again into here like that give it a little spin. And push and it says use itMoreSo you just hook this again into here like that give it a little spin. And push and it says use it in hard floor setting that way has maximum agitation so I have a clean bin it's a little dusty.
How do you clean the filter on a shark vacuum?
0:030:58How to clean the filters in your Shark Navigator® Zero-M™ Lift ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo access the HEPA filter press the button at the bottom of the filter door tilt the door and liftMoreTo access the HEPA filter press the button at the bottom of the filter door tilt the door and lift it off then remove the HEPA. Filter.
How long does it take to put together a Shark Navigator?
The Shark Navigator NV352 is easy to assemble and operate. It took us less than ten minutes to put the unit together.
What is Shark Navigator?
The Shark Navigator Lift-Away Upright Vacuum is ideal for most households as it’s intended for both standard hard floors and carpets. Though it’s one of the more affordable Shark models on the market, it still offers a great selection of features and accessories. It can be used as an upright vacuum or in portable lift-away mode to access hard-to-reach places. Equipped with a sealed air system and a HEPA filter that traps 99.9 percent of allergens, this is a top-notch choice for allergy sufferers. We put the Navigator NV352 to the test to see how well it handled everyday messes in our household. Read on to see what we found.
How much does a Shark upright vacuum cost?
Shark APEX Upright Vacuum with DuoClean: If you’re willing to spring for a vacuum that soars above the competition, the Shark APEX Upright Vacuum with DuoClean comes with a steep price tag of $330. However, it can do a few things that mid-range vacuums can’t: Its sleek floorhead can get under low furniture and clean areas that the Navigator NV352 simply can’t reach. The APEX also has a self-cleaning feature; its Zero-M Technology automatically removes hair from the brushroll while you’re vacuuming. Despite its steep price tag, the APEX’s stellar performance and advanced features are well worth it if you have the extra cash.
What tools does the Navigator NV352 use?
The Navigator NV352 comes with a dusting brush, two crevices tools, a wide upholstery pet tool. We took the detachable canister around to clean the hard-to-reach areas in our home, using the 24-inch crevice tool on the tops of door frames and grooves in the ceiling molding. We loved how well the dusting brush (intended for upholstered items) worked on lampshades, though the suction was a little too powerful for our silk drapes —even on the lowest setting. The pet upholstery brush worked wonders on our black upholstered kitchen chairs, where lint and pet hair is highly visible. We really appreciated the selection of accessories and were impressed with how well each of them performed.
How much does a Shark Navigator weigh?
The Shark Navigator NV352 is easy to assemble and operate. It took us less than ten minutes to put the unit together. Weighing 12.5 pounds, this is one of the lightest upright Shark vacuums on the market. When the canister is detached and the vacuum is used in lift-away mode, it weighs only 7.5 pounds. If a lightweight vacuum is a priority for you, the Navigator NV352 is a great option. Since the vacuum is smaller than other models, it has a lower-capacity dust cup—1.2 dry quarts—but that should be fine for basic cleaning. There is a mount to conveniently store the dusting brush and the crevice tool right on the vacuum. However, there are two loose pieces that need to be stored separately: the 24-inch crevice tool and the pet upholstery tool.
How much does a Navigator NV352 weigh?
When the canister is detached and the vacuum is used in lift-away mode, it weighs only 7.5 pounds. If a lightweight vacuum is a priority for you, the Navigator NV352 is a great option.
Does Shark Navigator have a vacuum?
The Shark Navigator Lift-Away Upright Vacuum packs almost all of the power you’d find on higher-end models—and for just a fraction of the cost.
How to remove motor from housing?
To remove the motor from the housing you need to remove all the screws from the base. If all the screws are in their place you should find 10 screws in total. Don’t be impatient. Slowly remove all the screws one by one and your motor should come out just fine without facing any sort of trouble.
How to get rid of dowel pins on motor?
These pins hold the latches in their place. To get rid of these pins you need to apply a specific amount of pressure alongside a center hole punch. But this pressure is not so much that you need to use a hammer to get the job done.
How to clean a HEPA filter?
Just pull it out slowly towards you and it’ll come out. Keep the dirty side on the bottom and clean away all the dust with a brush.
How to remove a pipe that looks like an elbow?
A very easy and fast way to remove the pipe which kind of looks like an elbow is pulling it in your direction. Don’t be too harsh on it. Just pull it out gently and it’ll come out very easily.
Can you videotape yourself taking apart a shark lift?
So, videotaping yourself is always a good idea while you are completing the process. If you forget any step you can always look back to the tape and figure out how you did it the first time around.
Do you need to take out the screws on a motor?
Usually, the newer models have two additional screws on the side of the motor for safety. So first you need to take them out. But the older models don’t have this and you can easily live it out.
How long does it take to put together a Shark Navigator?
The Shark Navigator NV352 is easy to assemble and operate. It took us less than ten minutes to put the unit together.
What is Shark Navigator?
The Shark Navigator Lift-Away Upright Vacuum is ideal for most households as it’s intended for both standard hard floors and carpets. Though it’s one of the more affordable Shark models on the market, it still offers a great selection of features and accessories. It can be used as an upright vacuum or in portable lift-away mode to access hard-to-reach places. Equipped with a sealed air system and a HEPA filter that traps 99.9 percent of allergens, this is a top-notch choice for allergy sufferers. We put the Navigator NV352 to the test to see how well it handled everyday messes in our household. Read on to see what we found.
How much does a Shark upright vacuum cost?
Shark APEX Upright Vacuum with DuoClean: If you’re willing to spring for a vacuum that soars above the competition, the Shark APEX Upright Vacuum with DuoClean comes with a steep price tag of $330. However, it can do a few things that mid-range vacuums can’t: Its sleek floorhead can get under low furniture and clean areas that the Navigator NV352 simply can’t reach. The APEX also has a self-cleaning feature; its Zero-M Technology automatically removes hair from the brushroll while you’re vacuuming. Despite its steep price tag, the APEX’s stellar performance and advanced features are well worth it if you have the extra cash.
What tools does the Navigator NV352 use?
The Navigator NV352 comes with a dusting brush, two crevices tools, a wide upholstery pet tool. We took the detachable canister around to clean the hard-to-reach areas in our home, using the 24-inch crevice tool on the tops of door frames and grooves in the ceiling molding. We loved how well the dusting brush (intended for upholstered items) worked on lampshades, though the suction was a little too powerful for our silk drapes —even on the lowest setting. The pet upholstery brush worked wonders on our black upholstered kitchen chairs, where lint and pet hair is highly visible. We really appreciated the selection of accessories and were impressed with how well each of them performed.
How much does a Shark Navigator weigh?
The Shark Navigator NV352 is easy to assemble and operate. It took us less than ten minutes to put the unit together. Weighing 12.5 pounds, this is one of the lightest upright Shark vacuums on the market. When the canister is detached and the vacuum is used in lift-away mode, it weighs only 7.5 pounds. If a lightweight vacuum is a priority for you, the Navigator NV352 is a great option. Since the vacuum is smaller than other models, it has a lower-capacity dust cup—1.2 dry quarts—but that should be fine for basic cleaning. There is a mount to conveniently store the dusting brush and the crevice tool right on the vacuum. However, there are two loose pieces that need to be stored separately: the 24-inch crevice tool and the pet upholstery tool.
How much does a Navigator NV352 weigh?
When the canister is detached and the vacuum is used in lift-away mode, it weighs only 7.5 pounds. If a lightweight vacuum is a priority for you, the Navigator NV352 is a great option.
Does Shark Navigator have a vacuum?
The Shark Navigator Lift-Away Upright Vacuum packs almost all of the power you’d find on higher-end models—and for just a fraction of the cost.
Important Safety Instructions
Assembly
- Place the Pod onto the Floor Nozzle Post.
- Insert the Wandinto the pod.
- Attach the Lower Accessory Holderto the pod.
- Insert the Handleinto the top of the wand.
Maintenance
- Self-Cleaning Brushroll Shark’s self-cleaning brushroll automatically removes hair wrap. If some hair remains wrapped around the brushroll, continue cleaning to give it time to make its way to the dust cup. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught behind the brushroll. CLEANING THE BRUSHROLL Using a coin, …
Troubleshooting
- Power cord caught in brushroll or floor nozzle. 1. ower cord caught in brushroll or floor nozzle. 2. To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord. If this occurs, immediately shut off power to the vacuum and remove the cord from the brushroll or nozzle. 3. Inspect power cord and plug for any damage before use. DO NOT use vacuum cleane…
Five (5) Year Limited Warranty
- The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC.Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of five (5) years from the date of purchase when it is u…
Technical Specifications
- Voltage: 120V- 60Hz Watts:800W Benefits of registering your product and creating an account: 1. Get easier, faster product support and access to warranty information 2. Access troubleshooting and product care instructions 3. Be among the first to know about exclusive product promotions TIP:You can find the model and serial numbers on the QR code label on the bottom of the back o…