:max_bytes(150000):strip_icc()/GettyImages-159395853-57824f815f9b5831b575e3ea.jpg)
TIMBERMATE is an easy-to-use grain filler that is perfect for repairing damage to wood such as scratches, gouges, and dents. Using a putty knife apply TIMBERMATE into the grain of the wood in small sections until you have achieved your desired coverage.
How do you use timbermate?
Add an approximate of 1 kilo of TIMBERMATE to 300-500ml of water and mix until desired consistency is achieved. The mixture can be applied using spray gun, paint roller, or cloth rolled into a ball. APPLY ACROSS THE GRAIN ONLY. When the grain filler goes whitish and sands off easily like talc powder, then it is dry.
How is timbermate different from other wood fillers?
It is different from all other solvent or acrylic based fillers in that it contains no toxins or VOCs. Timbermate Wood Filler is the perfect product to fill imperfections in furniture, drywall, MDF, paneling, and flooring.
Can I wipe/rub in or brush the timbermate?
If you wipe/rub in or brush too much, you can disturb the Timbermate. Once Timbermate is topcoated, it is sealed and resistant to moisture. Q: Timbermate has a unique scent.
How many square meters can you get from 1 kg of timbermate?
TIMBERMATE can give a minimum of 10-12 square meters per 1 kilogram (Mix 300-500ml water for 1 kilogram TIMBERMATE). 8. WILL TIMBERMATE INCREASE THE MOISTURE IN THE WOOD?
How long does it take for TIMBERMATE to dry?
about 30 minutesDrying time is about 30 minutes. TIMBERMATE dries hard and smooth without shrinking or sinking and can be belt or drum sanded as it is not affected by heat, the hotter it gets the harder and faster it sets and that means less "Down Time." You can speed dry TIMBERMATE by adjusting the surrounding air temperature.
How do you seal TIMBERMATE?
Fill deeper holes in layers of about 6mm allowing each fill to dry. Apply TIMBERMATE to entire floor as a sealant, using a squeegee, trowel or paint roller. Allow to dry and sand off with a fine paper – 120 to 150 grit is recommended for best results. Floor can now be stained or varnished.
How do you use water based wood filler?
1:3612:47Timbermate Water-Based Woodfiller - An Overview - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take some out just apply it on the surface. If you find it's still a little bit dry. It's onlyMoreJust take some out just apply it on the surface. If you find it's still a little bit dry. It's only a matter just dipping the putty knife in the water. And just spreading it across it the crack you
Can TIMBERMATE be used outside?
TIMBEMATE cannot be used outdoor. 3. CAN I USE TIMBERMATE WITH STAINS AND OTHER FINISHES? Yes, TIMBERMATE is compatible with any stain coatings and colorants (water, oil solvent, and spirit based including acid catalyst, single and two pack products, polyurethane, acrylic, vinyl, nitro cellulose lacquers, etc.).
What is TIMBERMATE made of?
The secret ingredient of Timbermate is tap water therefore containing no Acrylic, Latex or Solvents. Timbermate comes in 13 premixed colours plus Natural Tint Base. Timbermate takes all types of known stains, varnishes and coatings.
How long does it take for timber putty to dry?
Give the filler at least 30 minutes to harden; a full hour is even better. True wood fillers may dry so hard that you'll have a tough time hand-sanding it.
Why does my wood filler keep cracking?
The extra water will evaporate, without the volume the wood filler can't stretch across and it will crack. Basically wood filler will always crack unless the gap is tiny or you can keep the room still with the same humidity and temperature.
Do you use wood filler before or after sanding?
STEP 1: Sand and clean the wood surface in need of repair. ... STEP 2: Use a preconditioner on the damaged area to prevent color discoloration. ... STEP 3: Apply the wood filler using a putty knife. ... STEP 4: Allow the wood filler to dry completely.More items...•
What can I use to fill gaps in wood?
1:003:00How to Fix Large Gaps Using Wood Filler & Why You Should ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo both of these problems can be solved by simply adding another coat of the material. WhetherMoreSo both of these problems can be solved by simply adding another coat of the material. Whether that's caulking or spackling.
Is TIMBERMATE waterproof?
Once Timbermate is topcoated, it is sealed and resistant to moisture. Q: Timbermate has a unique scent. What is it? A: Because it is water-based, an antiseptic (similar to that used by your dentist to rinse your mouth) is used to keep the water from spoiling.
Can you mix wood filler with water?
Wood Filler Customer Favorites It comes in putty form, suitable for filling voids, and can be thinned with water to a consistency that works well for filling grain. It cleans up easily with water and is available in a number of colors, which can be mixed together or custom tinted to produce a perfect color match.
What happens if wood filler freezes?
If it freezes, simply put it in the microwave to warm it up or if it dries out, just stir in water. This allows for zero waste! This might just be the perfect wood filler. Manufacturer recommends using only stainless steel or plastic tools to apply because Timbermate may react with low grade steels and turn black.
Can TIMBERMATE be tinted?
TIMBERMATE can be mixed with any stains before or after filler is dry. To match medium and darker shades mix with Natural, Pine or other light shades.
How do you tint TIMBERMATE wood filler?
1:448:16How To Colour Match With Timbermate - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you have to color up a little bit of planet you don't have any stain. But yet this make a littleMoreIf you have to color up a little bit of planet you don't have any stain. But yet this make a little bit of brown Patti. Just really really easy to use just a drop of water.
Can you thin TIMBERMATE wood filler?
A. Yes, it is a non-solvent based filler and is ideal for grain filling. Mix 10-15% hot water to thin, then rub over the grain or spread thinly (see below for more detailed instructions). It will not raise or damage the grain.
Can I use putty to fill wood?
Wood Putty Overview Wood putty is a malleable material that is used to fill small holes and damage in woodworking and furniture. Wood putty is generally applied after the project has been completed (meaning stained, painted, and sealed).
What is Timbermate wood filler?
Timbermate Wood Filler is an interior grade, water-based wood filler. It is different from all other solvent or acrylic based fillers in that it contains no toxins or VOCs. Timbermate Wood Filler is the perfect product to fill imperfections in furniture, drywall, MDF, paneling, and flooring. Guitar and violin makers worldwide prefer ...
Can Timbermate be reconstituted with water?
Will not shrink, sink, crack or fall out. No waste – easily reconstitutes with water if dry. It has an indefinite shelf life, and can be reconstituted with water. if it dries out.
How long does it take for timber to dry?
In cold weather, the depth of fill will determine the drying time. You can speed up the drying time by using a heat gun, lights, or drying room, etc. For pin holes and hairline or small defects , curing time is about 30-60 minutes. But for bigger holes, cracks and gaps, curing time is 1-2 hours. For grain filler, curing time is about 15-20 minutes de pending on weather.
How many layers of timber should I use to fill a hole?
Fill deep holes in approximately 5-6 layers. TIMBERMATE dries quickly when filled in layers.20. HOW DO I FIX A WRONG MATCHED OR BADLY FILLED HOLE? Very easy. If TIMBERMATE is not coated yet, then wash it out. If already coated break the topcoat and then wash it out. Refill or rematch as necessary.
Can you use Timbermate stain?
You can use TIMBERMATE’S neutral colors such as Natural or Pine and then you can add stain or colorants. All stains are compatible with TIMBERMATE.
Does timber increase moisture?
TIMBERMATE will never increase the Moisture Content (MC) of the timber, MDF, particle board or plaster board (you may do moisture meter test to determine this claim). Always make sure wood is dry. If wood is wet, TIMBERMATE will be soft and wood will not be stable. Coating will also crack.
Can you match putty color with clear coat?
We manufacture several colors to match almost all shade for the different kinds of timber. If you are using a clear coat, you must match your putty color of timber. If staining, mix 2 to 3 TIMBERMATE colors to achieve the shade of timber you will stain. See our Color Board for reference.17. WHAT IS NATURAL PUTTY? Natural putty is putty in its natural state. You may add the lightest shade or tint to change its color (see also point #3).
What is Timbermate wood filler?
Timbermate Wood filler is an Interior grade 4 in 1 Wood Putty, Grain Filler, Edge Filler and Crack Filler. When thinned slightly with water can also be used as a sanding sealer. Timbermate does not shrink, sink, crack or fall out and has an indefinite shelf life.
When did Timbermate start?
When Timbermate began operations in 1991, it attracted instant respect for its Australian made, water-based woodfiller range, which is now sold in 20 countries and remains a flagship product of the group.
