Remove the links.
- Place the watch on the table with the push pins facing up.
- Insert the pin pusher into the hole and push the pin firmly.
- Once you’ve pushed the pin enough, it will pop out. Use pliers to remove it together with the link.
- Repeat the steps until you’ve removed the number of desired links.
- Remove links to make your watch band the right size.
- Includes: pliers and (2) different chain link removal pins (0.8mm diameter and 1mm diameter)
- Coated handle provides a secure grip.
How do you use a watch link remover tool?
0:390:57Watch Band Replacement - Watch Link Remover Deluxe - YouTubeYouTubeStart of suggested clipEnd of suggested clipSmall and compact this watch tool easily fits on your workbench.MoreSmall and compact this watch tool easily fits on your workbench.
What is the easiest way to take links out of a watch?
Place your watch into the holder or foam piece so that you can see the top of the pin. Use the pushpin tool and the hammer to gently tap the pin until it emerges from the other side. Use your fingers or a small set of pliers to remove the pin gently. Repeat until you've removed all your planned links.
How do you remove a watch pin without the tool?
0:476:09Adjust Resize Shorten Watch Band | How To No Tools - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'm going to do is simply tap put place the thumbtack. Right in the hole. And actually tapMoreSo what I'm going to do is simply tap put place the thumbtack. Right in the hole. And actually tap it with the underside of a screwdriver.
How do you use a watch link adjuster?
0:051:04Little Giant Link Watch Band Pin Remover - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd 2 bracelet height adjusters. Simply place the watch band in the channel align the pin pusherMoreAnd 2 bracelet height adjusters. Simply place the watch band in the channel align the pin pusher with the pin you want to remove and slowly tighten the screw to push the pin out of the watch band.
How much does it cost to get links removed from a watch?
How much does it cost to remove links from a watch? It will generally cost no more than $10 to remove links from a watch, although if you take it to the store you bought it from, they may do it free of charge.
How can I resize my watch at home?
0:003:50How To Resize And Adjust A Metal Watch Band - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd starting on the side with the arrow you push the paperclip. In right where the arrow is. AndMoreAnd starting on the side with the arrow you push the paperclip. In right where the arrow is. And that will push the pin out the other side of the watch you can see it coming out.
What can I use if I don't have a spring bar tool?
0:091:16How to change the watch strap easily without tools - just floss - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you don't need special tools for this all you need is dental floss.MoreAnd you don't need special tools for this all you need is dental floss.
How do you remove a stubborn watch pin?
1:124:29How to Remove Watch Band Pins Cotter & Friction - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the pin pusher against the cotter pin. And using the flat head of your ball-peen hammer tap theMoreHold the pin pusher against the cotter pin. And using the flat head of your ball-peen hammer tap the pin out of the link with the pin pusher.
What can you use as a spring bar tool?
Using a spring bar tool is one of the most effective ways to remove or replace your watch band but if you don't have one, worry not. We've got you covered. We'll show you how to use three alternatives which are a flat-head screwdriver, dental floss, and a razor blade.
How do you remove links from a stainless steel watch band?
0:563:09How To Easily Remove a Watch Link - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you notice on the back side of your watch band. Let's get that up nice and close there areMoreSo if you notice on the back side of your watch band. Let's get that up nice and close there are arrows these arrows are the direction that you want to pop your pins out so let's go ahead and do that
How loose should a watch be?
The watch should be loose enough that you can slide your index finger underneath the band but not so loose that you can move the index finger around. If you cannot slide your finger underneath the band, the watch is too snug.
How do you use pin remover?
1:053:15How To Use A Staple Remover-Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd as you can see I'm pressing it down against the paper and these prongs are lined up just likeMoreAnd as you can see I'm pressing it down against the paper and these prongs are lined up just like that they're lined up with the two pete's two pieces of the staple the two parts of the staple.
How do you remove a stubborn watch pin?
1:104:29How to Remove Watch Band Pins Cotter & Friction - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the pin pusher against the cotter pin. And using the flat head of your ball-peen hammer tap theMoreHold the pin pusher against the cotter pin. And using the flat head of your ball-peen hammer tap the pin out of the link with the pin pusher.
How do you remove watch back with notches without tools?
0:493:31How To Unscrew A Watch Back With Scissors (No Case Wrench Needed)YouTubeStart of suggested clipEnd of suggested clipI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going toMoreI'm going to squeeze the handles together and put apply some pressure downwards. And I'm going to turn counterclockwise. And hopefully I can unscrew. This let's see let's try I'm just gonna.
What If There Are No Arrows on the Bracelet?
It can happen that the metal bracelet doesn’t come with arrows indicating the direction the pins go out.
Can You Ruin Anything with Watch Link Removal?
Although the watch link removal is quite a straightforward task, it is still prone to accidents.
How to remove a link from a watch band?
Step 1: Locate the Link Pins. To remove a link in your watch band, you must first locate where to remove the link and how many links you want to remove. Particular links on your watch will have arrows indicating that they can be removed. Small removable pins hold each of these links in place.
What to do if your watch pin is loose?
Note: if the pin is loose, you may have to use pliers to clamp down on the band and secure the pin —be sure to wrap cloth around the pliers so that you don’t dent or gouge the finish on your watch.
How to pull a pin out of a watch?
Push your screwdriver into the opening across from the arrow and apply force on the pin in the direction of the arrow. Pull the pin all the way out. Be careful when pulling the pin out during this step. Be sure to hold the watch at the link where you are pulling the pin out from.
How many pins are there on a watch?
Most watches will have up to three pins that may be removed on each side of the clasp or buckle. Determine the number of links you wish to remove and locate the link pin at that position ( Advice: It is a good idea to remove links in multiples of two so links can be removed from each side of the clasp or buckle keeping the watch face centered on your wrist).
How to get a pin out of a screwdriver?
Keep the screwdriver inside the opening and apply force on the screwdriver in the direction of the arrow. The pin will begin to slide out (second photo). Continue to push the pin until you can pull the pin completely out with your fingers (third photo). Remove the pin.
How to make a watch fit?
Try on the watch and buckle the clasp. The watch should fit as desired.
Where are the pins on a watch?
To locate where each of these removable pins are, hold your watch with the face pointed towards the ground. Look on the underneath side of the wrist-band near either side of the clasp or buckle. You will find arrows indicating the link pins. Note the direction of the arrows—these arrows point in the direction that the pins will slide out from (see photo).
How to get a stubborn link out of a watch band?
It’s the manual way of doing things, but often, when a link is stubborn and won’t come out, you’ll have to use a little force and hammer it out. So a watch holder that holds the watch band, allows you to align the punch and hammer the pin through. As shown below…
Can you get yourself a watch link remover kit?
You could always get yourself a watch link remover kit too, as seen here:
Do punchers break?
The Puncher Breaks! Punchers are delicate. They don’t take much pressure to snap them. So the key is to make sure the watch link hole is perfectly lined up with the puncher, and then gently, carefully, push the puncher through.
Can you use a hammer to hold a watch?
These are great tools to use, although they do require a little bit more practice and dexterity to hold the watch, holder (most jewelers use a wooden one, like this one here ), pin and hammer all at the same time (and do use the rubber end of the mallet hammer on the watch so you don’t damage it ). Many people hold the watch, holder and pin themselves and then get someone else to use the hammer (when you have a hammer in your hands, everything looks like a nail ). Just watch your fingers! :)
What to use when you remove watch links?
If you're having trouble seeing when you remove watch links, use a mounted magnifying glass to enhance the pins, links, and other small watch parts.
Why do you need to remove links from a watch band?
Sometimes, it will be necessary to remove links from the watch band in order to get an exact fit. Read the following article to learn how to remove watch band links in order to tailor any watch to the specifications of your wrist.
How to wear a watch on your wrist?
Position the watch on your wrist exactly the way you intend to wear it. When you are satisfied with the way it is positioned, turn your wrist over so that the watch band clasp side is facing up.
How to separate a bracelet?
With some metal watch straps, it is necessary to separate the bracelet before you can remove any links. To do this: Remove the spring bar from the watch strap clasp. To identify which spring bar it is , hold the clasp in your left hand, and it will be the one on the left side.
How to pull a pin out of a sleeve?
You should be able to push the pin 2 or 3mm and then pull it out from the other side using your pair of pliers or by hand.
How to remove a metal link?
Choose which link you are going to remove. Use the pin pusher or spring bar removal tool to push the pin that secures that particular link, following the direction of the printed arrows on the underside of the metal link.
How to remove a spring bar from a clasp?
Use the spring bar removal tool or pin pusher to compress the spring bar and lever it out of the clasp.
Product Overview
Avoid expensive watch repair costs by making watch band adjustments on your own. These watch link removal pliers allow you to easily remove links to make your watch band the right size. The pliers feature a pivoting handle with an attached key ring for easy storage when not in use.
Warranty
We guarantee this product to be free from defects in materials and workmanship 90 days from the date of purchase. Limitations apply.
How to take out a pin hole?
Line up the pin pusher with the pin hole of the link you want to take out. Once in place, rotate the handle clockwise to bring the pusher towards and into the pin hole. Once in place keep rotating the handle until the pin pushes out.
How to tell if pins are pushing out?
Check the back of the strap for arrows which indicate the direction in which the pins will push out. You will want to push the pins through in the direction that the arrows are pointing.
