How do you winterize a Hotsy pressure washer?
- Turn machine switch to STOP position.
- Turn off water supply.
- Detach and drain high pressure hose and pressure washer trigger gun.
- Have approximately 2 Gallons of a 50/50 auto antifreeze solution ready.
- Turn machine switch to MOTOR ON and pour antifreeze solution into float tank.
Full Answer
How to winterize a pressure washer with DIY pump Saver?
Best Features:
- The best pressure washer pump saver for CAT pumps and AR pumps.
- One bottle has a total of 21 ounces of this lubricant
- Has rust inhibitor and anti-foaming ability that protects your pump thoroughly
- Users of this pump oil vouch for its efficiency and performance
How to winterize your sprinkler system the right way?
The Steps to Winterize Sprinkler System
- Shut off the Water Supply. All sprinkler systems have a main shut-off point. ...
- Drain the Pipes. You need to remove all of the water from the pipes and sprinklers that you can. ...
- Insulate Your System. ...
- Control Your Sprinkler System. ...
- Protect Valves and Stop Backflow. ...
- Consider Your Pump. ...
How do you unwinterize a house with a well?
as well. As an added bonus, for those wanting to completely escape winter and return to the green foliage of the spring and summer, Tied House's intimate interior has opened back up to customers.
How to winterize your home and plumbing?
- Insulate pipes with inexpensive insulation sleeves from your local Home Depot, wrapping or using slip-on foam pipe insulation. ...
- Maintain a heating source inside the building to protect pipes against the cold.
- Inspect the exterior of the property, making sure that all visible cracks are sealed. ...
How do I winterize my hot water pressure washer?
Turn off the pressure washer and detach the supply hose and high-pressure hose. Squeeze the trigger of the spray gun until all the water has been drained from the wand and hose. Restart the pressure washer and let it run very briefly (for about five seconds), until no water comes out of the high-pressure outlet.
Do I need to drain my pressure washer for winter?
Winterizing the Pump: First, disconnect all the hoses and the gun and wand assembly from the pressure washer, draining as much water as possible. For optimal results, use the STIHL Pump Conditioner and Winterizer. Attach the pump winterizer directly to the water inlet.
How do you winterize a commercial power washer?
0:183:13How to winterize a pressure washer Part 1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's important to run the air airline. Or to run the air and blow as much water out as possible.MoreIt's important to run the air airline. Or to run the air and blow as much water out as possible.
Can I put antifreeze in my pressure washer?
1:156:56How to Winterize a Pressure Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this one is much easier to use is pumped saver this product allows you to attach the can to theMoreAnd this one is much easier to use is pumped saver this product allows you to attach the can to the pump and pump the antifreeze. Directly into your pressure washer pump.
Can you use RV antifreeze to winterize a pressure washer?
RV Antifreeze is used to winterize a RV's water lines (potable water lines, not in the engine). It's main difference with normal antifreeze is that it is non-toxic and biodegradable, making it perfect for a pressure washer.
How do I protect my pressure washer from frost?
Here is a quick guide for keeping your machine safe from the frost.Heat Tubes. Wall Mounted Heat Tube. ... Drain Machine After Use. After finishing with your pressure washer you usually just turn it off, disconnect the hose spray-gun and lance, and remove inlet hose. ... Fan Heater. Portable Fan Heater. ... Keep inside. ... Antifreeze.
How do you use a Stabil pump protector?
How to Use:Attach pump protector hose to the water inlet hookup.Press down on can to dispense fluid.Once liquid exits the pump, your pressure washer is protected.Remove hose and store pressure washer.
What happens if you don't winterize your pressure washer?
Here's what can happen if you don't winterize your pressure washer: Broken seals, tank and hose: The most serious risk of not winterizing your pressure washer is that the water you leave in the machine will freeze. When water turns to ice, it expands.When and How to Winterize a Pressure Washerhttps://justpressurewashers.com › when-and-how-to-winte...https://justpressurewashers.com › when-and-how-to-winte...
What Does It Mean To “Winterize” Something?
Simply put, to winterize something means to prepare it for winter or to make it winter-proof. You winterize something for either of these two reasons:
Does A Hot Water Pressure Washer Really Need To Be Winterized?
The answer is a resounding yes ! It is absolutely necessary to winterize a pressure washer and it isn’t even that complicated to do.
1. Anti-freeze
Disconnect the water supply from your pressure washer and connect the anti-freeze solution container. This solution can be any anti-freeze or wiper fluid.
2. Flush water & dry
Flush out water and detergent by placing your washer’s injection tube into a bucket of clean water. Run on a low pressure setting and then turn off the engine.
3. Pump Saver
The final step to winterizing your pressure washer is your pump saver!
What makes a Hotsy hot water pressure washer better than other brands?
The biggest difference is the style of heating coil. (The coil is hundreds of feet of superior Schedule 80 ASTM pipe rolled in a cylindrical shape). While Hotsy uses Schedule 80 pipe, it’s important to note not all manufacturers do. Some choose to use tubing or Schedule 40 coil. The coil is heated by a burner using oil, natural gas, or liquid propane for fuel. The burner heats the coil and the heated coil heats the water as it flows through the coil.
Why do hotsy pressure washers use vertical coils?
Since heat rises, it rises up from the bottom of the vertical coil past all the coils and out the top. This is the most efficient coil for heating and energy usage, and produces hotter water, which cleans better. Hotsy industrial pressure cleaning systems use vertical coils exclusively, both for energy efficiency and for higher water temperature.
How do I know if I need a hot water pressure washer or a cold water pressure washer?
If the surfaces you are cleaning have any kind of grease or oil , you will need a hot water pressure washer to cut through the grease. If you're tackling caked-on dirt or mud, cold water pressure washer will do the job. If you're still unsure about the type of pressure cleaning machine you need, call your local Hotsy dealer to speak with a power washing expert.
What type of pressure cleaning accessories do I really need?
Pressure cleaning accessories are a relatively minor cost that can have a huge impact on making your cleaning faster and less expensive, while also saving wear-and-tear on your hot & cold water pressure washers.
What kind of warranty comes with a Hotsy?
Hotsy offers one of the best warranty programs in the industry, including a 7-year guarantee on the Hotsy pump and a 5-year guarantee on the heating coil. To view our complete warranty, click here or contact your local Hotsy dealer now!
What is a hotsy coil?
Hotsy industrial pressure cleaning systems use vertical coils exclusively, both for energy efficiency and for higher water temperature. In addition, Hotsy has 11 different size coils for our 80 models of hot water pressure washers. Many manufacturers have just one or two coil sizes. Hotsy coils can be matched to the amount of water to be pumped through them, for maximum temperature while using the least amount of fuel possible.
How to choose a power washer coil?
Your options are to buy a power washing machine with a horizontal lay-down coil, or buy one with an upright coil. The horizontal coil design typically is more compact because the coil is lying down, so the height of the pressure washer can be less (although the machine may be longer). An upright coil has the burner at the bottom of the coil instead of at the side as with a horizontal coil. Since heat rises, it rises up from the bottom of the vertical coil past all the coils and out the top. This is the most efficient coil for heating and energy usage, and produces hotter water, which cleans better.
