
How To Winterize Salt Water Pool (Inground Pool)
- 1. Cleanse. Use a net to expel any trash on your pool. ...
- 2. Test And Balance. While saltwater pools have sensors that notify you of the chlorine and salt levels, you must still manually use test strips. ...
- 3. Use Winterizing Agents. ...
- 4. Pour Enzymes. ...
- 5. Winterize Filter And Chlorinator. ...
- 6. Do Not Miss The Stabilizer. ...
- 7. Finally, Cover The Pool. ...
How to close or winterize your above ground swimming pool?
You will need the following:
- Your pool test kit.
- A winterizing chemical kit containing a pH increaser, alkalinity increaser, calcium hardness increaser, pool shock, and an algaecide. ...
- You will also need a winter skimmer cover plate, some expansion plugs and return line plugs, as well as an above ground pool winter cover, a cover winch, and matching ...
How to winterize a pool without lowering the water?
- Turn off all pool equipment per the manufacturer’s directions.
- If needed, partially drain your pool to lower the water level below the skimmer and return lines.
- Remove all drain plugs to completely drain the equipment, then remove the pool pump, chlorinator and hoses.
- Bring all equipment indoors for storage over the winter.
How do you winterize an above ground pool?
Pool Cover. Place a winter cover over your pool with the black side down. If you don’t have a deck all the way around the pool, thread the cable through the grommets or loops then tighten the cover to hold it securely in place. If you do have a deck around the pool, place water bags 3/4 full of water on the edges of the pool cover to weigh it ...
How do you close a pool for the winter?
Pro tips for closing your inground pool:
- Do it before it gets too cold (32 degrees)
- Cover the pool
- Never skip winterizing steps ( it may cost you)
- Service your pool heater and filter pump BEFORE closing for a stress-free spring opening
- Clean the pool before cover
- Turn off (and clean) your saltwater generator
- Clean the filter
