How To
- 1. Disconnect The P-trap We are assuming that you are replacing an existing sink drain so let’s get rid of the old drain assembly. ...
- 2. Remove The Old Drain Assembly ...
- 3. Prepare The New Drain Assembly ...
- 4. Install The New Drain Assembly ...
- 5. Tighten The Drain Assembly ...
- 6. Install The Drain Stopper ...
- 7. Connect The Pop Up Lever ...
- 8. Reconnect The Plumbing ...
Full Answer
How do I seal a sink drain pipe?
What orientation should a washer be when using slip joints?
About this website
How do I seal a sink drain pipe?
To ensure a watertight seal, I’m applying a bead of silicone all around the drain pipe. Make sure to use 100% silicone and apply a generous bead before dropping the drain into the sink hole.
What orientation should a washer be when using slip joints?
Tip: It’s important to note the orientation of the washer when using slip joints: make sure the tapered side is facing whatever you’re trying to connect to.
What is a sink drain plug?
This sink drain is designed with a drain plug that can be flipped and rotated in place. This allows for fast draining speeds and easy access to clean the drain from any crud or hair build-up.
How big is a bathroom sink drain hole?
The diameter of a standard sink drain hole is around one and a half inches, and this diameter works well with most bathroom vanity sinks.
What is an old school sink drain?
The “old school” style of sink drain assemblies. The rubber or plastic stopper has to be plugged and removed in these drains to stop the flow of water. They are operated manually and are mostly provided with a small basket so that the unwanted items do not accidentally fall down the drain when the stopper is removed. The chain and plug style drain is the perfect match for a vintage pedestal or cast iron sink.
What is a pop up drain?
These are also called pop-up drains. Installation of these drains are a breeze and they are very easy to use. This drain style is an excellent choice for those who want a simple drain stopper or have limited strength or dexterity in their hands. All that you need to do is press down on the drain cover to activate the pop-up mechanism.
How long does it take to replace a sink drain?
Installing a new sink drain assembly can be easily done in a few minutes with some basic hand tools.
What to do if you can't hold a drain in place?
If you can’t hold the drain in place, no worries! Simply lay a towel in the sink to protect the finish and place a heavy object like a book or bowl full of water over the drain.
What is the purpose of an overflow in a vanity?
An overflow is a hole in the side of the sink itself that allows the bowl to drain and prevent the sink from overflowing in the case that the drain is shut. If you have a bathroom sink with an overflow outlet you need to opt for a drain assembly with an overflow opening to make sure the sink functions properly.
Where to put putty in sink?
Place the sink basket wrapped with putty into the hole at the bottom of the sink basin.
How to tell if a sink is leaking?
If you have done everything correctly, there shouldn’t be any major leaks. If there is a leak, you’ll usually see them in one or two slip nut joints.
What is a sink basket strainer?
A sink basket strainer: The screen or net that prevents dirt and debris from getting into the main sink drain pipe.
How to use a slip nut on a pipe?
Slide the slip nut from the bottom of the pipe and thread it onto the basket strainer. Make sure it fits snugly.
How to make a rope with plumber's putty?
Scoop out a sizable amount of plumber’s putty and roll it between your palms to make a rope. This is similar to what kids do with playdough when they make snakes.
Where to put a slip nut on a flanged bottom?
Remove the gasket or high hat washer that comes with the flanged-bottom slip nut. Place it on top of the tailpiece pipe.
Is it easy to install a sink drain?
It’s not a skill that’s used every day, but knowing how to install a sink drain can save you big money when you do need it. The process is relatively easy, and we cover everything you need to know below.
How long does it take to install a sink drain?
Putting in a sink drain is a simple home improvement project that anyone can complete in less than half an hour. First, decide whether you’ll be installing your new drain in your bathroom or the kitchen—the process is nearly identical, but the parts you’ll need differ slightly.
How to get rid of water in sink?
1. Place a spacious container under the sink to catch waste water. Grab a bucket, bowl, or spacious plastic food storage container and set it on the floor directly beneath the sink. It will collect any water that happens to spill out when you disassemble the plumbing.
How to loosen locknut on drain?
If the drain spins while you’re attempting to loosen the locknut, steady it by spreading the handles of a second pair of pliers inside the top of the drain, inserting the blade of a screwdriver between them, and holding the screwdriver with your free hand.
What happens if you don't put a drainage container down?
If you don’t take the precaution of putting a drainage container down, you could end up with water all over your floor.
Do you need to remove the friction ring from a new drain?
You’ll also need to remove the friction ring and gasket from your new drain to prepare it for installation if it came pre-assembled.
Does plumber's putty need to dry?
Plumber’s putty doesn’t need to dry or harden, so you can resume using your sink immediately after your project is complete.
What is the connection between a bathroom sink and a drain pipe?
The bathroom drainpipe pipe is connected to the other house’s fixtures into the main house drainpipe which in return is connected to the city’s sewer line or septic tank. This means that your bathroom sink drainpipe is always in communication with other fixture drains.
What are the Parts of a Bathroom Sink Drain?
Most people don’t think of their plumbing until something goes wrong. And something will go wrong someday. A bathroom sink drain for instance will need your attention at some point.
What is the clevis rod on a bathroom sink?
The Clevis Rod. The clevis rod, which is also known as a clevis strip is the metal strip or rod under the bathroom sink which connects both the lift rod and the pivot rod. It helps creates an elbow, allowing the stopper to move up and down with respect to the lift rod movements.
Why does my bathroom sink smell like gas?
For instance, if the vent stack or main house drainpipe is clogged, your bathroom sink will be draining slowly, and you might even experience a sewer gas smell in your bathroom.
Why does my bathroom sink have low water pressure?
Another thing that can cause your bathroom sink to have low water pressure is if these hoses are kinked.
How many handles does a bathroom sink have?
Depending on your preference, a bathroom sink can have 1 or 2 faucet handles, one for the cold water and the other for the hot water. A single-handle bathroom sink faucet will discharge cold or hot water depending on which direction you turn the handle.
Why is my bathroom sink draining slowly?
A clogged/slow draining bathroom sink is usually caused by hair and soap scum in the drainpipe, restricting the flow of water. A drain hair removal tool (zip-it tool) is usually perfect for fixing this problem.
How do I seal a sink drain pipe?
To ensure a watertight seal, I’m applying a bead of silicone all around the drain pipe. Make sure to use 100% silicone and apply a generous bead before dropping the drain into the sink hole.
What orientation should a washer be when using slip joints?
Tip: It’s important to note the orientation of the washer when using slip joints: make sure the tapered side is facing whatever you’re trying to connect to.
