On most boats, the throttle consists of one or two levers connected to the engine by cables. On smaller outboard motors
Outboard motor
An outboard motor is a propulsion system for boats, consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom. They are the most common motorized method of propelling small watercraft. As well a…
How do you control the throttle on a boat?
On most boats, the throttle consists of one or two levers connected to the engine by cables. On smaller outboard motors, the throttle is controlled by twisting the hand grip on the engine's tiller arm. One-lever Throttle. Start with the throttle in the middle (neutral) position, with the lever arm straight up.
Do outboard motors have throttle control and shifter?
Outboard motors have their own throttle control and shifter on conventional throttle control and shifter. Because you can move the levers individually. When one motor is pressed forward or “throttled up” the other outboards do not. So, you know how a boat throttle works.
Should I Retrofit my digital throttles?
Retrofitting digital throttles can give your boat a brand new feel. My Bluewater 2550 was three years old last fall and had run beautifully on a pair of Evinrude E-Tec 200s, but over time, the throttle cables began to stretch and wear. The damage made it difficult to synchronize and shift the engines in a coordinated manner.
What are the most common boat throttle cable problems?
Boat throttle cable problems are sudden loose cables, adjusting issues, damaged cables and slow speed. You have to detect the problems first. In the case of sticky cables, you have to lubricate them as early as possible. Furthermore, you need to calmly adjust the cables which help in tightening. Wait, don’t leave. This is just a short overview.
How do you use an outboard throttle?
The throttle is in the hand grip of the tiller that you use to steer the boat. You twist the hand grip to control the throttle. Move the gear lever on the side of the motor to either the forward or reverse position. Twist the throttle to speed up.
Why do some boats have two throttle controls?
Dual-function mechanical controls are the most popular type of control in use today because they make boat handling easy. Both shift and throttle are operated by a single lever in a very instinctive action. Shifting is quick and can only be done at low rpm, which protects the engine's shift mechanism.
Is it OK to run boat at full throttle?
Every boat owner is different and how far you decide to push your marine engine is in your hands. However, running your boat at Wide-Open Throttle is not bad for your engine and can even help clear out carbon build up.
Which way is reverse on a boat throttle?
0:121:08Forward, Reverse and Neutral Gears: Boater Safety and EducationYouTubeStart of suggested clipEnd of suggested clipForward neutral and reverse forward gear is indicated with an f on your control. And is moving theMoreForward neutral and reverse forward gear is indicated with an f on your control. And is moving the control towards the bow of the boat reverse is indicated with an r on your control.
How do you throttle a boat in neutral?
Place the shifter in the neutral position, in the middle of the shifter range, and you'll feel a detent when you shift to it. In-Gear Release Button. By pressing the in-gear release button, the operator can increase the throttle without shifting into gear, allowing the engine to rev in neutral.
How do you adjust a boat throttle?
Adjust the throttle itself. Start the engine and, with the engine running, twist the throttle grip. Twist it counterclockwise from the "Idle" position to increase speed and clockwise to decrease speed.
How long can you run a boat motor at full throttle?
According to David Meeler, Yamaha's product design manager, “You only have about 15 seconds of cumulative dry running time before your impeller starts to fail due to excessive friction. That means if you run your outboard dry for three seconds five times, it will likely fail.”
How many rpms should I run my boat at?
The full-throttle limit for modern marine gasoline motors ranges from 4800 to 6000 rpm. (By comparison, your car's engine probably turns less than 2500 rpm at freeway speeds.) Most mechanics and engineers suggest the best cruising speeds are achieved at 3400 and 3800 rpm respectively.
How fast is idle speed on a boat?
Most boats have two 5 mph speeds. The first, with the throttle clicked just forward of neutral, is called “idling in gear” — so that the engine is turning at around 600 rpm. The second 5 mph speed is the one in which the engine is turning about 1,300 rpm. At this engine speed, there's more thrust.
How do you drive a boat with two throttles?
1:163:55Twin Screw Boat Handling - YouTubeYouTubeStart of suggested clipEnd of suggested clipTogether. You have two throttle controls to work with the starboard or right throttle. And the portMoreTogether. You have two throttle controls to work with the starboard or right throttle. And the port or left throttle. Each control is connected to an engine on your boat on the corresponding.
Does a boat move in neutral?
Jet boats, like other powerboats, have a neutral position on the throttle control lever which controls the movement of the boat. This middle position is the “neutral” position on a jet boat, but that doesn't mean the impeller stops spinning, nor does it mean water stops flowing out of the nozzle.
Does a boat turn in neutral?
Most small boats with outboards, outdrives and gasoline inboards have a neutral safety switch in the engine control handle. Some transmissions have the switch mounted on the shift lever. Hydraulic and pneumatic controls (like the one in the 90' MY) can have them, but many do not.
How do you drive a boat with two throttles?
1:163:55Twin Screw Boat Handling - YouTubeYouTubeStart of suggested clipEnd of suggested clipTogether. You have two throttle controls to work with the starboard or right throttle. And the portMoreTogether. You have two throttle controls to work with the starboard or right throttle. And the port or left throttle. Each control is connected to an engine on your boat on the corresponding.
What are the levers on a boat?
From the perspective of the boat, the oars are class one levers. The Fulcrum appears where the oarlock meets the oar.
What should a boat idle at?
A boat's engine should idle at around 650–700 RPM.
What is the difference between a mechanical and an electronic throttle control?
A mechanical throttle control is operated by a cable that is connected to the accelerator pedal, while an electronic throttle control is operated b...
Are boat throttle cables universal?
Boat throttle cables are not universal, and there are a few things you need to know before purchasing one. First, you need to determine the type of...
Why do some boats have two throttle controls?
If you have ever been on a boat with two throttle controls, you may have wondered why they are there. The answer is actually quite simple. Boats wi...
Are Mercury's throttle and shift cables the same?
The answer is no. Mercury throttle and shift cables are not the same. The reason for this is that Mercury uses a different type of cable for their...
How to stop a boat from going in reverse?
Twist the throttle to speed up. Twist it in the other direction to slow down. Bring the engine to an idle and change the gear lever to neutral to stop the boat.
How to use a hand grip tiller?
Hand-grip Throttle. Line up the arrow on the throttle to the "Shift" marking. The throttle is in the hand grip of the tiller that you use to steer the boat. You twist the hand grip to control the throttle. Move the gear lever on the side of the motor to either the forward or reverse position. Twist the throttle to speed up.
How does a boat throttle work?
On smaller outboard motors, the throttle is controlled by twisting the hand grip on the engine's tiller arm.
How to get your car to idle?
Always bring the engine to an idle before shifting gears. Use the right lever to control your speed. Push the lever forward to go faster, pull it back to slow down, and pull it all the way back to bring the engine to an idle.
How to start a car in neutral?
Start with the throttle in the middle (neutral) position, with the lever arm straight up . The engine should be idling with the transmission in neutral
How to slow down a boat?
To slow the boat, pull the lever back. To stop the boat, pull the lever back to the middle position. Slowly pull the lever back to engage the reverse gear. The further back you pull the level, the faster you will go. Push the lever back to the middle position to stop the boat.
How to shift a car into reverse?
This is the shift lever. Pull the right lever all the way down. This lever controls your speed. Push the left lever forward to shift into forward gear, or pull it back to shift into reverse gear.
What is Suzuki's hardware?
The Hardware: Suzuki opted for simplicity plus a polished chrome finish on binnacles and levers for top-mounted single and dual controls and, unlike the other makers, carried that look to the side-mounted controls. Trim controls for multiple engine setups are on a separate waterproof control panel.
What is power sync?
Special Features: Powersync gives control of two or more engines to one throttle, syncing engine speed, and forward, neutral and reverse, to allow multiple engines to be run in sync by one throttle. Rpm Tune allows 1 percent throttle changes to be made at the punch of a button, letting the operator choose the best trolling or skiing speed or most economical cruise speed and hold it.
How many rpm does a 50 rpm trolling machine have?
Likes: Push-button 50 rpm trolling adjustments are easy to make between 600 rpm and 1,000 rpm. Rugged controls include chrome-like levers and glossy black binnacle, one-key operation and separate on/off switches.
How many engines are in a single engine controller?
The Hardware: Single-engine controllers are available in side-mount or binnacle styles. Twins to quints — yes, five engines — are controlled by a two-lever binnacle. All feature polished chrome bases and levers with composite accents.
How many engines does an Evinrude have?
Multiple Engines: Only Evinrude's Icon handles five engines and automatically synchronizes them for smooth running. During pivoting and docking, the center engine automatically shifts to neutral and remains that way until and unless throttle/shift controls align at common gears and speeds.
Can you retrofit a Suzuki 300 HP engine?
Fittable and Retrofittable to: Today, SPC is available only for Suzuki’s 300 hp engines and can be retrofitted for boaters who have not chosen the product with their original equipment.
Does the SPC have a push button?
Special Features: SPC lacks push-button speed controls but incorporates a simple and effective engine sync mode once the levers are in “the same rpm vicinity.” Dealers and owners will benefit from the incredibly short two-minute initiation process using a laptop and Suzuki’s diagnostic systems.
How to shift a boat?
Place your hand on top of the handle. Under the handle your fingers should feel the Shift Locking Mechanism. This Locking Mechanism must be lifted with your fingers before attempting to shift. Note: If you shift past the forward detent the engine will accelerate and the boat will move forward faster. This is called "throttling" and it should never be done while tied up to a dock. Only throttle up if you are untied and ready to proceed forward.
How to shift a motor that won't crank?
If the motor won't crank make sure your shifter handle is in neutral. Place your hand on top of the handle. Under the handle your fingers should feel the Shift Locking Mechanism. This Locking Mechanism must be lifted with your fingers before attempting to shift.
How to shift from neutral to reverse?
Practice shifting from neutral into reverse by pulling the handle back into the reverse detent position.
What is wikihow wiki?
X. wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 9 people, some anonymous, worked to edit and improve it over time. This article has been viewed 79,251 times.
How to slow down a boat?
To slow down, slowly pull back on the handle little by little until the boat drops off-plane and returns to in-gear idle. Do not shift into neutral until the boat has slowed way down to the idle speed. Remember to ONLY SHIFT at dead idle speed.
How does a boat's bow rise?
As you accelerate and push the handle forward the bow bow of most boats will rise up and you will make a large wake. Eventually, as the boat speeds up the bow will drop down and the boat will "plane-off" and ride fast on top of the water.
How many people edit wikihow?
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, 9 people, some anonymous, worked to edit and improve it over time. This article has been viewed 79,081 times.
