Open the fuel door, slowly add wood in a north-south direction and close the door. Only after you've closed the fuel door should you close the bypass damper. Do not confuse the bypass damper on the Buck stove with the damper on your fireplace chimney. Some models of Buck stoves can be installed as a wood burning fireplace insert.
How do I use my Buck Stove?
Place two or three small pieces of your firewood directly on top of the kindling. These three items, the newspaper, kindling and fire wood, are the key components to using your Buck stove. It is important to keep in mind that you are only getting the fire started at this point, so do not yet put it the majority of the wood you plan to use.
Can a Buck Stove be installed as a fireplace insert?
There are many options when it comes to purchasing a Buck stove. The older models from the 1970s are freestanding and with a double door, though they can also be installed as a fireplace insert. The more modern wood stoves tend to be designed as fireplace inserts and come in a much wider variety of sizes to suit any home.
What causes a Buck Stove to burn out?
Burning problems in a Buck stove sometimes can be attributed to misuse of the damper. Leaving the bypass damper open after reaching temperatures to trigger the catalytic combustor will cause the combustor not to operate efficiently and the heat from the stove will be less than expected.
What does a catalytic combustor do on a Buck Stove?
Understanding its function will help you to troubleshoot problems with the stove. Buck stoves use a catalytic combustor to enhance the energy efficiency of the stove and reduce the amount of smoke produced. The combustor burns particles a regular wood stove would expel through smoke.
How do you use a Buck stove insert?
1:4811:0198: Buck Stove Model 91 Review and Fire Starting Process ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipOpen make sure that the damper is the whole way opened. And then i burn regular newspaper paper ballMoreOpen make sure that the damper is the whole way opened. And then i burn regular newspaper paper ball it up nice and tight.
How do you light a Buck stove insert?
Using a Buck Stove To build your fire, first place twists of newspaper around the bottom of your stove. Lay a few pieces of dry kindling on top. Ensure all of these pieces are touching so the fire will spread once you light it. On top of your kindling, place a couple of smaller pieces of your firewood.
How do you use a damper on a Buck stove?
Bypass Damper: The bypass damper control is located in top center of heater front just under top. It is operated by pushing or pulling the rod. The damper is fully open when the handle is pulled out and fully closed when it is pushed in. The damper must be open before the door is opened.
What is a buck insert?
Description. Buck Stove Model 91 catalytic insert is our most popular selling wood stove. Used as a masonry fireplace insert, or freestanding - this unit easily accepts 21" logs and heats up to 3200 square feet with an astonishing 50,400 BTU's per hour.
How long will a buck stove last?
The catalytic combustor has a six-year life expectancy when used according to the stove owner's manual. Although, some combustors have operated with efficiency for as high as ten years, the combustor's life is based on the stove operator, maintenance, fuels used, and the stove manufacturer's design.
Can you put gas logs in a buck stove?
Gas logs cannot be installed in wood burning stoves or gas burning stoves. Wood stoves are designed to use far less air than wood burning fireplaces, so in most cases they have a 6" diameter vent that is not enough to properly exhaust the fumes given off by gas logs.
How do you close the damper on a Buck Stove?
Using the Buck Stove Damper When refueling a burning stove, be sure to open the bypass damper so that the smoke in the firebox can escape. Open the fuel door, slowly add wood in a north-south direction and close the door. Only after you've closed the fuel door should you close the bypass damper.
How do I know if my damper is open or closed?
Before lighting a fire, you can tell if the damper is open by placing your hand into the fireplace. If you feel a draft coming down the chimney, it is a good indicator that the damper is open. If you don't feel any cold air coming down the chimney, it means that the damper is closed.
Should I close the damper on my wood stove?
You don't want to leave your wood stove damper fully open, though, because then the heated air will continue to escape, and your room won't get warm. By closing the damper, it will reduce the oxygen levels in the chimney, and you'll have a longer fire. According to Northeastern Chimney, this also creates a downdraft.
Are Buck Stoves any good?
We love our Buck stove. I was really worried if this little model 18 could do the job since its only rated for 1200 square feet but after installation, this heater punches way above its rating heating our 1500… More. Being built in the USA, the build quality and materials are unmatched.
Are Buck Stoves safe?
Not only is an old buck stove inefficient they are also highly dangerous due to how they were installed several years ago. Old buck stoves were usually just placed inside a masonry fireplace; they had no kind of attachment to the chimney liner.
How hot can a Buck stove get?
Catalytic Wood Stove Models It has a larger 2.6 cubic foot firebox which can handle logs up to 22 inches in length and can heat between 1,500 - 2,600 square feet. Capable of producing 40,500 BTUs per hour, this is a great stove.
How to use a buck stove?
Using a Buck Stove. You should first open your stove door and locate the air control. This allows you to choose the temperature you require from your Buck stove. To build your fire, first place twists of newspaper around the bottom of your stove . Lay a few pieces of dry kindling on top.
What is a buck stove?
A buck stove is a great way to heat up the home. Image Credit: PamWalker68/iStock/GettyImages. If you want to heat your home efficiently and enjoy a cool, rustic aesthetic, a Buck stove could be the ideal solution for you. These wood-burning stoves offer a viable home heating alternative to burning oil and gasoline.
Is a buck stove a good heater?
A real wood fire feels relaxing and looks and smells beautiful. Buck stoves are equally aesthetically pleasing with a rustic, retro look to every model. Buck stoves, in particular, are easy to maintain and clean, and a perfect option for those who have never used a wood-burning heater before.
Can a buck stove be used as a fireplace?
There are many options when it comes to purchasing a Buck stove. The older models from the 1970s are freestanding and with a double door, though they can also be installed as a fireplace insert. The more modern wood stoves tend to be designed as fireplace inserts and come in a much wider variety of sizes to suit any home.
Is a buck stove dangerous?
Mishandling your Buck stove could lead to it being less effective or even dangerous. If you're curious about whether a Buck Stove could be right for you, this is all the information you need.
Is a wood burning stove a good alternative to gas?
These wood-burning stoves offer a viable home heating alternative to burning oil and gasoline. According to Buck Stove, these wood-burning heating options solved a huge problem with home heating back in the 1970s, and they continue to be a popular option today. But the key to getting the most out of your Buck stove is knowing how to properly use it.
Can you turn the heat up or down?
Remember that you can turn the heat up or down at any point by using your air control — more air will mean more heat. Annie Walton Doyle is a freelance writer based in Manchester, UK. Her work has appeared in The Huffington Post, The Daily Telegraph, Professional Photography Magazine, Bustle, Ravishly and more.
Why does my Buck stove burn?
Burning problems in a Buck stove sometimes can be attributed to misuse of the damper. Leaving the bypass damper open after reaching temperatures to trigger the catalytic combustor will cause the combustor not to operate efficiently and the heat from the stove will be less than expected. Open the bypass damper whenever you need to open the door ...
What is a bypass damper on a buck stove?
The bypass damper on a Buck stove controls the flow of smoke from the stove either to the flue or the catalytic combustor. There are seven materials that should not be burned in a Buck Stove; if they are, it will cause the catalytic combustor to be ineffective. Advertisement.
What is a combustor in a wood stove?
The combustor burns particles a regular wood stove would expel through smoke. This more complete burning increases the temperature the stove reaches. There are seven materials that should not be burned in a Buck Stove; if they are, it will cause the catalytic combustor to be ineffective.
What is a wood burning stove?
A wood burning stove, such as those made by Buck, creates an enclosed fire spot for your home. These stoves connect to their own chimney for venting smoke. One of the most important parts on these stoves is the damper. You cannot operate a Buck Stove without the damper.
Can you burn wood in a buck stove?
Treated wood, coal, garbage, cardboard, solvents, colored paper and trash should not be burned in a Buck Stove. According to the Buck Stove company, burning temperatures between 1200 and 1600 degrees Fahrenheit are normal. The bypass damper on a Buck stove controls the flow of smoke from the stove either to the flue or the catalytic combustor.
Can a buck stove be installed as a fireplace insert?
Do not confuse the bypass damper on the Buck stove with the damper on your fireplace chimney. Some models of Buck stoves can be installed as a wood burning fireplace insert.
Can you change wood logs to gas?
No, we do not recommend doing this. If you changed from wood to gas, it would not only void the warranty of the gas log set, but you run the risk of damaging gas components in the log set itself and damaging your home.
Can you stack a buck?
Yes, it is possible. You will need a stack and a pedestal to do so. First, you must determine which model you have. To do so, measure the rectangular opening on the top of the unit. If the opening is 13¾” x 3¼,” you have either a Model 26000 Old Buck (Little) or a Model 27000 Old Buck (Regular).
Do you need to replace a catalyst in a non catalytic stove?
At some point, depending on how you operate the unit and the type of wood burned, you will probably need to replace the catalyst. Non-catalytic units have an average efficiency rating of 63%, which is quite high for a wood burning unit. There is not a big price difference between catalytic and non-cat stoves.
What is an electric fireplace insert?
Electric fireplace inserts use resistance from electrical elements to generate warm air for the room. Electrical heating appliances consume additional electricity beyond lights and a blower. Only verified electrical circuits should be used with all heating appliances, especially electrical fireplace inserts.
How much does a wood burning insert cost?
A DIY wood-burning insert may be found for under $2,000. However the chimney liner system could cost that much or more. By the time the liner system and installation and insert a bundle together cost could exceed $5,000. But this cost is worth it to insure the installed fireplace insert is safe and functional.
How to prevent chimney fires?
Creosote build-up through a wood burning inserts chimney is the number one cause of chimney fires. There are a few ways to minimize chimney fires with wood inserts: 1 A properly installed wood insert fireplace and chimney liner system 2 Burning good firewood 3 Regular chimney sweeping maintenance 4 Annual Chimney Inspections
How long have wood fireplace inserts been around?
Wood fireplace inserts have been around for more than 100 years, and their appeal is obvious. With a wood insert, you can get more heat without replacing the whole fireplace and chimney. However, with all their features and benefits, there is an installation requirement that not every homeowner is aware of. Wood-burning fireplace inserts need their ...
What are the different types of fireplace inserts?
There are 3 Types of Fireplace Inserts: Wood. Gas. Electric. 1. Wood-Burning Fireplace Inserts. Wood burning fireplace inserts give much more heat and enjoyment than a conventional masonry fireplace. If you plan on continuing to burn wood fire fires, and you wish for more heat, this is a good choice. Wood fireplace inserts have been ...
What is the best way to minimize chimney fires?
Simply being aware and doing these things regularly will minimize chimney fires when using your fireplace insert. 2. Gas Fireplace Inserts. If you’re done with wood burning, and you think you’d enjoy the warmth and convenience of gas logs in your fireplace, then consider a gas fireplace insert.
Can a chimney flue be used to vent a wood burning insert?
While the original masonry fireplace and clay flue liner can be used as a passageway, the original chimney flue can not be used to vent the wood burning insert. A connector and chimney system, designed with the wood burning insert in mind would be a necessary addition to the wood burning stove inserted into the fireplace.
