What is a colonator II?
What is an ENT plasma cart?
About this website
What does a Coblator do?
Coblation (a word derived from "controlled ablation" involves using low-temperature radiofrequency and a saline solution to gently and precisely remove the problematic tissues. The risk of injury to surrounding tissue is much lower than with cautery, and patients return to their normal activities more quickly.
How is coblation done?
Coblation tonsillectomy is a surgical procedure in which the patient's tonsils are removed by destroying the surrounding tissues that attach them to the pharynx. It was first implemented in 2001. The word coblation is short for 'controlled ablation', which means a controlled procedure used to destroy soft tissue.
Is Coblation tonsillectomy less painful?
Conclusion: Coblation tonsillectomy causes significantly less pain during the first three postoperative days, when compared with dissection tonsillectomy.
What is coblation device?
COBLATION devices establish a plasma layer of reactive particles that disrupt organic molecular bonds in target tissue, resulting in volumetric removal of tissue with minimal damage to adjacent healthy tissue. 1. The COBLATION plasma layer is created by current flowing between closely-spaced, bipolar electrodes.
How much does coblation cost?
On MDsave, the cost of a Coblation Turbinate Reduction (in office) ranges from $380 to $629. Those on high deductible health plans or without insurance can save when they buy their procedure upfront through MDsave.
Is coblation hot or cold?
Coblation is a new method where the surgeon uses an electrically powered handpiece that 'burns' tissues using low temperatures.
How long does Coblation tonsillectomy take?
Coblation uses radiofrequency energy and natural saline, not heat, to gently dissolve tonsil tissue and remove the infected or enlarged tonsils. Coblation Tonsillectomy is a quick outpatient procedure that takes less than 30 minutes, and is performed in an operating room with general anesthesia.
Which method of tonsillectomy is best?
Monopolar/bipolar electrocautery The most common technique used for removing tonsils in the United States today is monopolar electrocautery, also called a “hot” tonsillectomy.
What is the best method to remove tonsils?
Electrocautery: This method uses heat to remove the tonsils and stop any bleeding. Cold knife (steel) dissection: A surgeon uses a scalpel (traditional surgical knife) to remove your tonsils. Then, they'll stop the bleeding with electrocautery (extreme heat) or sutures.
Is coblation a radiofrequency?
Coblation is a minimally-invasive approach to ENT procedures. It uses gentle radiofrequency technology and natural saline to precisely remove or shrink targeted tissues, while minimizing damage to the surrounding, healthy areas.
When was coblation invented?
Coblation (derived from “Controlled ablation” meaning the removal of tissue in a controlled manner) techniques have been present since the 1950s and have been developed so that errors can be removed to achieve a surgical techniques that is free from both defects and negative affects.
What is endoscopic coblation?
Endoscopic coblation adenoidectomy ensures complete removal of adenoids and reduces postoperative adenoid grade. It can also be considered safer because it is under endoscopic control and can reach the cranial portion of the adenoid and its intranasal extension.
How do they keep your mouth open during tonsil surgery?
You are given general anesthesia to put you into a deep sleep through the procedure. A special device is used to hold your mouth open. A tube is put down into your throat to help keep your airway open during the procedure. The doctor uses surgical tools to remove the tonsils and possibly the adenoids.
How long does coblation tonsillectomy take?
Coblation uses radiofrequency energy and natural saline, not heat, to gently dissolve tonsil tissue and remove the infected or enlarged tonsils. Coblation Tonsillectomy is a quick outpatient procedure that takes less than 30 minutes, and is performed in an operating room with general anesthesia.
Is Tonsilstone surgery painful?
A tonsillectomy is the complete removal of the tonsils. Like any surgical procedure, there are risks of complications such as bleeding and infection. It's also a painful procedure that can involve two or more weeks of moderate to severe pain, says Thatcher.
What is endoscopic coblation?
Endoscopic coblation adenoidectomy ensures complete removal of adenoids and reduces postoperative adenoid grade. It can also be considered safer because it is under endoscopic control and can reach the cranial portion of the adenoid and its intranasal extension.
What Is Coblation Technology?
"Co-" stands for "controlled" and "-blation" is from the word, "ablation," which is the process of reducing the size of something; when the sun mel...
Why was Coblation Tonsillectomy developed?
Surgeons and patients alike have searched for years for a better way to remove the tonsils. Because the tonsils are located in the throat, removing...
How Is A Coblation Tonsillectomy Different from A Standard Tonsillectomy?
Unlike the electrosurgery procedure, a COBLATION tonsillectomy generates significantly lower temperatures on contacted tissue*. This gives surgeons...
Coblation Technology Uses An Advanced Process to Remove Tonsil Tissue
COBLATION technology precisely removes tissue by dissolving the tonsils at the molecular level rather than rupturing or burning the cells.
Class 2 Device Recall Coblator II System - Food and Drug Administration
1 A record in this database is created when a firm initiates a correction or removal action. The record is updated if the FDA identifies a violation and classifies the action as a recall, and it is updated for a final time when the recall is terminated.
Smith & Nephew
Smith & Nephew
Smith and Nephew - ArthroCare Cobolator II Community ... - MedWrench
-Stephano49 5 years ago: 5 years ago Electrosurgical Unit (ESU) Smith and Nephew ArthroCare Cobolator II I can not find a service manual for this unit, and was looking to find out what is actually required for maintenance (PM) on these units Reply
What is a colonator II?
The COBLATOR ◊ II Surgery System is designed for ablation, resection, and coagulation of soft tissue and hemostasis of blood vessels in otorhinolaryngology (ENT) surgery. Using patented COBLATION ◊ technology, the system dissolves tissue at the molecular level in a highly-controlled manner with minimal thermal effect on surrounding tissue. In addition to a wide selection of Plasma Wands designed for specific ENT surgical applications, the complete system is composed of a COBLATOR II Controller, a flow control valve unit and cable, a foot control unit, and a hospital-grade power cord.
What is an ENT plasma cart?
The versatile ENT COBLATION ◊ plasma technology cart provides the convenience and organization that the operating room requires. The mobile cart allows all the COBLATOR ◊ II system components to be stored easily, including the COBLATOR Controller, foot pedal, IV pole, and flow control valve allowing for efficient procedure setup.
What is a COBLATION Tonsillectomy?
A COBLATION tonsillectomy is the use of a COBLATION wand to remove the tonsils.
How is a COBLATION tonsillectomy different from a standard tonsillectomy?
Unlike the electrosurgery procedure, a COBLATION tonsillectomy generates significantly lower temperatures on contacted tissue*. This gives surgeons the ability to precisely remove targeted tonsil tissue while preserving the nearby healthy tissue.
How does coblation technology remove tissue?
COBLATION technology precisely removes tissue by dissolving the tonsils at the molecular level rather than rupturing or burning the cells.
Why is it important to remove tonsils with electrosurgery?
Because the tonsils are located in the throat, removing them with an electrosurgery device can often lead to painful damage of nearby tissue . COBLATION technology offered an alternative to high-heat electrosurgery.
What is ablation technology?
What is COBLATION Technology? "Co-" stands for "controlled" and "-blation" is from the word, "ablation," which is the process of reducing the size of something; when the sun melts an iceberg, the process is called, "ablation.". COBLATION technology combines radiofrequency energy and saline to create a plasma field.
How does electrosurgery work?
Electrosurgery generates very high temperatures by applying high-voltage energy directly to the tissue. This high heat energy is used to rupture cells and vaporize tissue. Further, this heat energy is transferred to surrounding tissues which may cause significant damage such as burning and charring.
How many airway fires occur in the US each year?
Airway Fire Risk. Airway fires are often referred to as a "never" event in the operating room - meaning they should never happen. Unfortunately, as many as 600 airway fires occur each year in the US, resulting in catastrophic patient injuries.
How does a calculator affect the world?
The calculator has had a profound impact on the world, making computations quicker and more exact. In the classroom, calculators have given many students the ability to learn about and put complex formulas and concepts into practice more easily. Especially in lower-grade mathematics courses, some instructors still don't allow their use to make sure students truly understand mathematical concepts and learn problem-solving techniques. But for many calculus and trigonometry courses in high school, for example, graphing calculators are a requirement.
How do chips work?
Microchips use binary logic by turning transistors on and off literally, with electricity. So, for example, if you wanted to add 2 + 2, your calculator would convert each "2" to binary (which looks like this: 10) and then add them together. Adding the "ones" column (the two 0s), gives you 0: The chip can see that there is nothing in the first position. When it adds the digits in the "tens" column, the chip gets 1+1. It sees that both are positive, and -- since there are no 2's in binary notation -- moves the positive reply one digit to the left, getting a sum of 100 -- which, in binary terms, equals 4 [source: Wright ].
Why are calculators banned in class?
Graphing calculators have even been banned in some classes because of their high memory capability. Students can use their calculators' memory to cheat by storing other information -- like periodic tables or test answers -- in them.
How does the processor take 100?
So, the processor takes that "100" and translates it by lighting up or turning on certain segments of the lines in the display to create the numeral 4.
What are the different types of calculators?
Calculators have even moved online and have a number of practical applications. Here are some specific types of calculators you might find online: 1 Weight-loss calculators can measure body mass, caloric content and workout impact. 2 College loan and mortgage calculators that can help you determine the cost and length of a loan according to a wide array of variables. 3 Conversion calculators give you everything from measurements of volume and length to up-to-the-minute currency exchanges. 4 Carbon footprintcalculators may help you get an idea of your impact on the environment.
How does a calculator work?
Many modern calculators have a durable plastic casing, with simple openings in the front that allow rubber to push through, just like a television remote. By pressing a button, you complete a circuit underneath the rubber, which sends electrical impulses through a circuit board below. Those impulses are routed through the microprocessor, which interprets the information and sends a readout to the calculator's display screen.
What is a TI-92 calculator?
In fact, when Texas Instruments introduced its TI-92 model in 1995, they called it "a calculator with the power of a computer lab" [source: Texas Instruments ].
HOW DOES A CARBONATOR WORK?
Here is a simple principle on how does a carbonator works; Carbonators are designed in many shapes and sizes however they all work the same when carbon dioxide gas (CO2) under pressure is infused with water causing bubbles to form when the liquid becomes effervescent and gives a fresh sparking taste to the drink.
WHAT IS A SODA FOUNTAIN?
A soda fountain is a device that dispenses soda water or soft drinks. A soda fountain could also be a shop or counter selling drinks from a soda fountain.
HOW DOES A SODA VENDING MACHINE WORK?
A vending machine is an automated machine that dispenses small articles such as drinks, snacks, beverages, etc. When employees or clients are thirty or feel like snacking, a vending machine helps in quenching their thirst because it quickly dispenses drinks and snacks.
How does a soda fountain carbonator work?
Here is how a soda fountain carbonator works; first, CO2 is dissolved into the water by lowering the temperature of the water or increasing the pressure of the CO2 gas using a Carbonator. Secondly, carbonator pumps or booster pumps introduces a force that increases the pressure allowing the CO2 to dissolve into the water.
What is a carbonator pump?
The Carbonator pump is specially designed to pump water much greater than the pre-set CO2 pressure to give you a potent level of carbonation.
What is carbonation process?
Carbonation process also means dissolving a quantity of carbonic gas into different products in other to obtain a gasified final product. This process is used for wines, soft drinks etc. Carbonation also imparts sparkles on beverages and drinks, gives it a tangy taste, and prevents spoilage.
How much CO2 can be absorbed in a pint of water?
CO2 dissolves much better in cold water than hot. At a temperature of about 45°F (about 8°C) that most soda makers recommend, 2.2 pints (1 liter) of water can absorb about 0.1 ounces (3 grams) of CO2.
How Does Magnetic Generator Work?
Magnetic generators operate on the electromagnetic induction concept. A conductor coil (a copper coil wound tightly onto a metal core) is rapidly rotated between the poles of a horseshoe-type magnet. An armature is made up of a conductor coil and a core.
How Does A Generator Use Electromagnetic Induction?
It works on the electromagnetic induction principle, which involves moving a wire near a magnet to generate an electric current. In 1831, scientist Michael Faraday discovered these phenomena when he detected an electric current flowing around a loop of wire after passing a magnet across it.
How do generators create or produce electric Current?
The voltage regulator first transforms a small amount of alternating current voltage to direct current , which it then sends to the stator’s secondary exciter windings. These secondary exciter windings now resemble the primary stator windings due to the addition of an additional amount of AC power. There is a connection between the secondary exciter windings and the spinning rectifiers.
How Does A Generator Work In An RV?
It provides power to these devices and appliances via the circuit breaker panel. When linked to shore power, your RV’s house batteries and shore power are the other sources of electrical energy for your appliances.
What is the difference between a vibrator and a PCB?
The simplest vibrators just have an on/off switch, while the most complex have controls attached to their very own PCB. Lieberman notes that the classic Rabbit Habit (the vibrator made famous by Sex and the City) has a pretty innovative set of controls.
What kind of batteries do toys use?
But since portability is sexy, most modern toys are either powered by replaceable dry-cell batteries or rechargeable lithium ion ones. For Eva, Lieberman opted for a rechargeable battery, deeming it the best combination of space efficiency and power.
What is vibrator skin?
A skin that separates its innards from yours. Depending on your preference, a vibrator’s skin might be made of a hard plastic (like ABS or TPR) or a soft rubber (like silicone, cyberskin, jelly rubber, or elastomer).
Do vibrators have a PCB?
Chances are good that there’s a printed circuit board (PCB) inside. Though not all vibrators have one — simple vibrators with just a few speeds and no special functions don’t need elaborate circuitry — a PCB allows vibe makers to offer the user a more seamless experience as they operate their toy.
What is a colonator II?
The COBLATOR ◊ II Surgery System is designed for ablation, resection, and coagulation of soft tissue and hemostasis of blood vessels in otorhinolaryngology (ENT) surgery. Using patented COBLATION ◊ technology, the system dissolves tissue at the molecular level in a highly-controlled manner with minimal thermal effect on surrounding tissue. In addition to a wide selection of Plasma Wands designed for specific ENT surgical applications, the complete system is composed of a COBLATOR II Controller, a flow control valve unit and cable, a foot control unit, and a hospital-grade power cord.
What is an ENT plasma cart?
The versatile ENT COBLATION ◊ plasma technology cart provides the convenience and organization that the operating room requires. The mobile cart allows all the COBLATOR ◊ II system components to be stored easily, including the COBLATOR Controller, foot pedal, IV pole, and flow control valve allowing for efficient procedure setup.