A wing paddle is a type of paddle that has a blade on each side of the shaft. The blades are angled so that when they are submerged in water, they create lift and thrust. This allows the paddle to be used for both propulsion and steering.
How to use a wing paddle?
The most important aspects to keep in mind when you do a forward stroke with a wing paddle is this: The wing blade need to go into the water as vertical as possible during the catch phase of the stroke. The blade should be as far forward as possible and as close to the boat as possible when it catches.
How do power paddles work?
When you pull on your paddle it starts to move the water. The water on the power face of the blade tries to move away from the blade and the water on the back face tries to follow the paddle. The water in front of the power face needs to go some place as you push it.
What muscles do you use when you paddle?
Your shoulders are working hard when you paddle. The front shoulder muscles pushes the top blade forward during the stroke. The back shoulder muscles pull the bottom blade during the stroke. The side shoulder muscles keep everything stable and also helps lifting the blade out of the water at the end of every stroke.
Why choose the epic mid wing paddle?
The award-winning Epic Mid Wing paddle has become the top choice for fitness and racing paddlers, and increasingly, touring kayakers who want to maximize the potential of their forward stroke.
How do you use a wing paddle?
1:283:21How To Use A Wing Paddle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i want you to think about three things your legs. Your obliques. And your lats those are yourMoreSo i want you to think about three things your legs. Your obliques. And your lats those are your large muscle groups when you plunge that paddle in as vertical as you can and you rotate your torso.
What is a winged paddle?
Wing paddles are fairly long compared to most other paddles. The length of the paddle is not determined by how strong you are, but by your own height and arm length. As a rule of thumb, stand next the paddle and stretch your one arm out above your head.
Why would you feather the paddle?
Here are the most common reasons for feathering: When it's windy and the wind is at your face, you can feather your paddle and adjust your wrists so the blade that's out of the water is flat instead of broadside to the wind. You'll notice less wind resistance.
How do you size a wing paddle?
0:062:50Wing Paddle Set-up - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right paddle setup. So first things first get a smaller blade. Half you've got blades in it tooMoreAll right paddle setup. So first things first get a smaller blade. Half you've got blades in it too big that's the flow ms2. It's about the right size for coast-to-coast peddling for a strong peddler.
How do I choose a surfski paddle?
You need to ascertain how strong of a paddler you are and make the appropriate choice in blade size. The bigger the blade, the more effort it takes to move it through the water. Bigger guys, very strong paddlers, can use a bigger blade. Most of us use a mid size blade or small mid in most brands.
What is a Greenland paddle?
A Greenland paddle was used by the Inuit paddlers of Greenland. It predates the European blade shape by thousands of years and is characterized by a long slim blade (typically around 3 1/4 – 3 1/2 inches wide) and a shorter loom (or shaft).
Why are kayak paddles twisted?
Paddlers naturally will adjust their movement, so the paddle blade enters the water square, or else they risk falling in or at least a messy stroke. Setting twist angle should be done to promote rotation.
How can you tell if a paddle is left or right hand feathered?
On an right hand control paddle (more explanation shortly) when the right blade is vertical the left blade will be tilted forward and the degree of tilting (the amount of offset) is referred to as the feather angle. For a left hand control paddle it's the opposite.
How do you paddle with a feather paddle?
The feathered paddle was 230 centimeters long and had a blade angle of 80 degrees for right-hand control. My paddling mentor gave me a simple set of instructions: line up your knuckles here and when you want to take a stroke on the left, twist your wrist back and put the paddle in the water.
How do you size a surfski paddle?
1:112:56How to Hold a Paddle for Beginner Surfski Paddlers - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaybe three to four centimetres. From where the spoon. Starts is where your pinky should be andMoreMaybe three to four centimetres. From where the spoon. Starts is where your pinky should be and obviously equidistant on each side.
How do you determine kayak paddle length?
Take the width of your kayak on the top horizontal axis, and then take your height on the left vertical axis, where they meet is your paddle size.
How long is a paddle ski?
Typically 5.0-6.0 metres(16½-21 ft) long and only 40–50 cm (16-20") wide, surfskis are extremely fast when paddled on flat water (only an Olympic K1 or K2 kayak is faster) and the fastest paddled craft available over a long distance on ocean swells.
How do you size a surfski paddle?
1:112:56How to Hold a Paddle for Beginner Surfski Paddlers - YouTubeYouTubeStart of suggested clipEnd of suggested clipMaybe three to four centimetres. From where the spoon. Starts is where your pinky should be andMoreMaybe three to four centimetres. From where the spoon. Starts is where your pinky should be and obviously equidistant on each side.
What are the parts of a canoe?
The basic parts of a canoe include the bow, stern, hull, keel, deck, gunwales, thwarts, yoke, and if equipped, the seats. Each part of a canoe has its own function and purpose and all parts are designed to provide stability, speed, tracking, durability and most of all safety and seaworthiness.
What muscles do paddles work?
They work hard, and the ligaments attaching these muscles to the joints also tend to get injured first if your paddle blades are too big or if the shaft is too stiff. Lats. The lats provide a lot of the pulling force when you paddle forward, and seasoned paddlers tend to have well-developed lats. Chest.
What muscles do you use to paddle?
It’s not hard work, so relax your neck. Shoulders. Your shoulders are working hard when you paddle. The front shoulder muscles pushes the top blade forward during the stroke. The back shoulder muscles pull the bottom blade during the stroke.
How to get a blade out of water?
The elbow bends to about 45° to get the blade out of the water, lifts it up to about shoulder height, and then starts pushing. The pushing hand should stay between shoulder and eye height all the way to the front.
What happens if you pull your shoulders up while paddling?
Try keep them as relaxed and low as possible. If you pull your shoulders up, you will end up with cramps in your neck while messing up your paddling technique.
What is the vertical stroke of a paddle?
For most paddlers it is hard to consistently do a stroke that is more vertical than 60° , but even at 60° you’re getting substantial benefit from the wing if the rest of your technique is good. The release. The largest part of the pulling action is over by the time the blade goes past your knees.
How do quads work?
Your quads do the pushing work to keep your bum in your seat when you pull on the blade. When you do a long distance paddle, you won’t feel your quads working too hard. But when you do a sprint session, you will appreciate how hard they actually work. Your hamstrings pull your knees up at the end of each stroke.
What is the foundation of a proper forward stroke?
The foundation of a proper forward stroke is rotation . Without proper rotation , the paddle action is reduced to a few muscles working too hard. With proper rotation, you gain two things: correct movement of the wing blade through the water, and distribution of the work to a lot of different muscles.
Why do paddles push against water?
The goal of the paddle is to push against the water so that the boat goes forward. This rather simple principle is not as simple as it seems because the water is a fluid that doesn't want to be pushed against. The act of trying to push against water tends to make the water move away from the force.
What happens when you pull on a paddle?
When you pull on your paddle it starts to move the water. The water on the power face of the blade tries to move away from the blade and the water on the back face tries to follow the paddle. The water in front of the power face needs to go some place as you push it. And it wants to go where ever is easiest.
How is propulsion created?
Propulsion is created by the principle of conservation of momentum. This is the " for every action there is an equal and opposite reaction " idea. Stated mathematically momentum (M) equals mass (m) times velocity (v) [M = m*v] and for momentum to be conserved, the change in momentum (–M) of the boat (–Mb) must equal the change of momentum of the water (–Mw) [–Mb = –Mw]. In other words if you are starting a 100 kilogram kayak from standstill and with you paddle make 10 kg of water move backwards at 10 meters per second, you kayak will end up moving forward at 1 meter per second [10 kg * 10 m/s = 100 kg *1 m/s]. Notice that you could get the exact same result by moving 100 kg of water at 1 m/s, or 1 kg at 100 m/s. This is where the inefficiency comes in.
Why put more blade area in water?
Putting more blade area in the water will automatically increase the mass of water you have to push against with an immediate increase in efficiency. It is a common mistake for beginner kayakers to just use half the blade. Be sure you submerge the paddle blade completely in the water.
What happens when a paddle is pulled straight back against the water?
As a paddle is pulled straight back against the water, the water spills around the edges. The water spins in a pair of vortice. A larger blade will effect a larger mass of water and thus does not move through the water as fast.
How do propellers work?
Paddle wheels apply power via dragging through the water. Propellors operate via lift through the water. However in basic principle they both push against the water and as a result the water starts to move.
What is the force applied to the side of the mass called?
When a force is applied to the side of the mass it is actually called a "torque". Torques have the tendency to rotate the mass they are applied to. Sitting in your kayak, your center of mass is in the center of the kayak and you are sticking your paddle out to the side.
