How to unstop the oiler on a Stihl Chainsaw?
Things You Will Need
- Leather gloves
- Adjustable wrench
- Small flat-head screwdriver
- Sheet of paper
- Hardhat
- Earplugs
- Safety glasses
- Boots
How to unclog chainsaw oiler?
– 3 Easy Methods
- Method 1 – Test Run The Chainsaw Without Cutting Through Wood. After running the chainsaw without cutting through wood, check the chain. ...
- Method 2 – Operate The Chainsaw Pointing The Bar. Run the chainsaw (without cutting), pointing the bar to cardboard or clean wood or paper. ...
- Method 3 – Check Out The Oiler Holes. ...
How to properly start a chainsaw?
- Bare hands Step-by-step Procedures
- Step I: Activate the chain brake Before commencing the starting process, be certain to activate the chain brake. ...
- Step II: Press the decompression controls Some models of these chainsaws have decompression controls. ...
How to replace the oiler Assembly on a chainsaw?
[Back to Top] Installing the new oiler assembly. 1. Install the new oil pickup tube. Gently press the new tube into the body. 2. Install the new gear Use a flat-head screwdriver to carefully press the new gear onto the spindle. 3. Install the new oil pump assembly. Make sure you attach the correct oil block to the new oil pump.
How do I know if my chainsaw oiler is working?
0:241:47How to check if your chainsaw bar oiler is working - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe paper or whatever you're using to gauge it in you'll see if you see oil fling off you'll see aMoreThe paper or whatever you're using to gauge it in you'll see if you see oil fling off you'll see a little lying being made.
How does a chainsaw bar oil pump work?
But how does a chainsaw oil pump work? The crankshaft drives the pump, which draws oil from the tank and pushes it onto the guide bar via the outlet hole. The movement of the chain then distributes the oil along the entire length of the guide bar.
What is an automatic oiler on a chainsaw?
Automatic/Fixed Flow Chainsaw Oilers As their name suggests, automatic or fixed flow oilers provide a consistent amount of oil whenever the saw is running. Any time you use your saw, you'll get the same amount of oil on your chain.
Why is my chainsaw not oiling the chain?
1:586:46How To Fix A ChainSaw If It Won't Oil The Bar And Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe only other thing it can be is that your Guide bar itself is plugged namely the oil hole in theMoreThe only other thing it can be is that your Guide bar itself is plugged namely the oil hole in the side of the guide bar.
How do you check the oil pump on a chainsaw?
5:046:023 Easy Ways To Check If Your Chainsaw Is Oiling The Bar & ChainYouTubeStart of suggested clipEnd of suggested clipToday I use the cardboard to see if there was any oil spraying from the bar and chain and the thirdMoreToday I use the cardboard to see if there was any oil spraying from the bar and chain and the third method is take the barn chain off. Run it and see if there's oil coming out of the oiler hole.
How do you adjust a chainsaw oiler?
0:383:20oiler adjustment on chain saw ms44 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay off to the left you can see the line getting smaller which indicates. It's going to be less oilMoreOkay off to the left you can see the line getting smaller which indicates. It's going to be less oil if you turn it in that direction which would be counter clockwise. And as you go clockwise.
How does Husqvarna chainsaw oiler work?
Husqvarna chain saws possess an automatic oiler that continuously pumps small amounts of oil from the reservoir through the attached oil line, and onto the saw's guide bar and chain. When the line is clogged, however, the oil can't reach the chain, putting you and your equipment at risk.
How does a Stihl chainsaw oil pump work?
2:295:18Stihl Chainsaw Chain Oiler Not Working? Check This First To Fix ...YouTubeStart of suggested clipEnd of suggested clipMake sure it's flush with the oil pump. And this is how it works it spins around with the clutch.MoreMake sure it's flush with the oil pump. And this is how it works it spins around with the clutch. Drum. Then this part goes. In then your clutch goes.
Can you start a chainsaw without bar oil?
Running a chainsaw without bar oil will cause mechanical problems, and some serious safety issues, such as: Kickback. Chain failure. Dulls the chain.
How do you manually oil a chainsaw chain?
0:010:51How to Add Bar and Chain Oil to Your Gas Chainsaw - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe cap and pour the oil into the reservoir no overfilling. Please then screw the cap back on andMoreThe cap and pour the oil into the reservoir no overfilling. Please then screw the cap back on and wipe down any excess oil there. Nothing like a well-oiled.
Should I run my chainsaw dry?
Never run your chainsaw dry, instead use a quality gas stabilizer. A stabilizer will keep fuel fresh and protect a chainsaw fuel system from damage caused by stale gas.
How do you clean a chainsaw oil filter?
Foam Filter Cleaning Instructions:Dismantle the air filter cover and carefully remove the air filter.Wash foam filter in clean, warm soapy water.Squeeze foam filter dry in a clean cloth.Apply foam filter oil.Squeeze foam filter in clean cloth to remove excess oil.Reassemble air filter and cover.
How do I change the oil pump on my chainsaw?
3:455:53How to Replace a Chainsaw Oil Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you have the pump drive installed connect the hose to the oil tank pickup. Then slide the newMoreAfter you have the pump drive installed connect the hose to the oil tank pickup. Then slide the new pump over the crankshaft. Making sure to align the rubber housing onto the frame assembly.
What is the Oiler on a Chainsaw?
An oil reservoir performs the oiling mechanism in current chainsaws (gas and electric) with an oil pump. While the chain is moving, the oil pump releases lubricant from the reservoir on the guide bar as the throttle is pressed. The rotating chain then distributes it evenly on the bar.
How do I know if my Chainsaw Oil Pump is Bad?
If your oil pump isn’t working, no oil will flow the guide bar’s groove, and chain lubrication would be compromised. If you notice that your Chainsaw is getting hotter than normal despite having enough lubricant in the tank, the chances are that your oil pump is bad.
How do you Check a Chainsaw Oil Pump?
To check if the pump is working correctly, remove the guide bar to make the clutch visible. Push the throttle and notice if any oil is sprayed from the oil outlet port while the throttle is engaged. If no oil drips out from the port, your oil pump isn’t working.
How do you Adjust a Chainsaw Oiler?
An adjustment screw is used to tune the bar oil’s flow on the oiler. You can increase the amount of oil that gets to the bar by turning the screw out (counterclockwise). Likewise, turning the screw in (clockwise) lowers the oil supply to the bar.
What happens if you Run a Chainsaw without Bar Oil?
A chainsaw without bar oil will not function smoothly. Apart from its performance, inadequate lubrication leads to overheating of the Chainsaw. This makes it highly susceptible to an engine seizure if run for a prolonged period without oil. In addition, it also raises the risk of kickbacks.
How often should I Oil my Chainsaw?
If you have a gas chainsaw, you should fill the oil reservoir every time you refuel it. For electric chainsaw models, you should examine the oiler after each use and make sure it gets replenished when empty.
Can I use Vegetable Oil in my Chainsaw?
You can use vegetable oil when bar oil isn’t available. It has known to provide adequate lubrication to prevent chain wear. Canola oil (rapeseed oil) is the most preferred form of vegetable oil to be used in chainsaw chains.
How Does a Chainsaw Oiler Work?
Every modern chainsaw uses an automatic oiling system. And they all work pretty much the same. First, chainsaw bar oil is deposited inside the oil reservoir. And while you definitely need to keep track of your oil levels inside the reservoir, most come with translucent view windows so that you can see when levels are getting low.
How to Keep Your Bar Properly Oiled
As you have learned, keeping your bar and chain properly oiled is extremely important. Even more important is using the proper lubrication. When it comes to what type of bar oil to use for your chainsaw, you should always refer to the manufacturer’s recommendation, which you can easily find in the owner’s manual.
How to Check Your Chain for Oil
Before you get to work, you should definitely make sure your chain is properly oiled. Just because the oil reservoir is full and the mechanism appears to be working, it does not mean you shouldn’t check to make sure the oil is actually on the chain.
What happens if you don't lubricate your chain?
Without adequate lubrication there could be several consequences, such as: • Improperly maintained and poorly lubricated chains can increase the risk of kickback.
Can you use vegetable based lubricant on trees?
One final point, if you are pruning, it is recommended that you use a vegetable based lubricant to prevent harm to your trees and shrubs. Indeed, as most of the oil ends up in the environment you may wish to use this type of oil regardless of the job.
What happens if your chainsaw oiler isn't working?
If your chainsaw’s oiler isn’t working, it could cause your chainsaw to smoke which is a telltale sign that something isn’t working right. To lubricate your bar and chain, the oiler uses (you guessed it) bar and chain oil.
What is chain oiler?
A chain oiler is a pump in your chainsaw that automatically pumps oil into the bar groove which is then picked up by the chain while it’s running . This oil lubricates your chain to decrease the friction of your chain across your bar. This keeps your saw running smoothly and efficiently. If your chainsaw’s oiler isn’t working, ...
Why is my chainsaw not getting oil?
And if you’re reading this, then you’re probably wondering: why is my chainsaw bar not getting oil? The most common reason a chainsaw oiler stops working is that the oil hole gets clogged.
Why does my chainsaw stop working?
The most common reason a chainsaw oiler stops working is that the oil hole gets clogged. To fix this, remove the chain and bar from your chainsaw and clean the oil hole and oil outlet port. If this doesn’t fix the problem, you’ll probably need to replace the oil line or pump.
Where is the oil outlet on a chainsaw?
The oil outlet port is where the oil from your oil tank leaks out into the oil hole on your chainsaw bar. This little port can get gunked up with sawdust and debris. The oil outlet port is located just behind the bar on your chainsaw. Here’s a picture of the one on the saw I’m cleaning out.
How to get oil off of a saw?
Then either get a log that needs to be cut, a piece of carboard, or something similar. Hold your saw a few inches away from your chosen object and run your chain. The thought here is that if your oiler works properly, it will spray oil off the tip of the saw.
How to clean a bar oiler?
Lucky for you, this is a pretty straightforward process. Here’s what you’ll need to do: 1. Remove the Bar and Chain. To remove your bar and chain, unscrew the covering and remove it.
