It rotates first one way then the other on a central stem and there's adjustments for arc, height and reach, all on the outside of this stem. It has a three leg base in yellow and all the works are black. Can't find a picture on the net. But with all these it's only the pressure of the water that activates any mechanism.
How to solve the problem of a sticking Hozelock sprinkler?
For a long term solution make sure your supply water has a good particle filter. Suggest you store your sprinkler underwater as with unused water pumps. Can anyone advise me on how to solve the problem of a sticking Hozelock sprinkler. It starts off fine, but after a few minutes it then gets stuck and is unable to sweep back and foe.
How does the Hozelock system work?
The Hozelock system also enables you to get water from any tap (both indoor and outdoor) to your garden quickly and easily. Tap Connectors (1) are a very important part of the system as they turn your tap into the first point of the system.
What is a Hozelock hose?
Building your Watering System – Simply Click & Connect! The Hozelock system has been created by gardeners for gardeners since the invention of the world’s first plastic hose connector in 1959. The Hozelock system also enables you to get water from any tap (both indoor and outdoor) to your garden quickly and easily.
How do I connect a sprinkler to my hose?
A: To connect a sprinkler to your hose, we advise using an Aquastop Connector to the end of your hose, followed by connecting this to the male connection on your sprinkler. If you do not have a male connection on your sprinkler, you can purchase a Hozelock Accessory Adaptor that will enable you to connect the sprinkler to an Aquastop Connector.
How do you adjust a Hozelock sprinkler?
Easily Adjustable – The sprinkler can water a rectangle or a part of a rectangle. Adjustment is easy, simply slide the red setting rings.
Why has my Hozelock sprinkler stopped oscillating?
If you experience problems with jamming or oscillation, it is possible for limescale to build up on the internal mechanism of the sprinklers, and cause it to jam or to stop oscillating as it should.
Why is my Hozelock sprinkler not rotating?
A: Check the red setting rings to ensure they are in the correct position. There are two, if one is set near the top, the sprinkler will only oscillate in one direction. This is so you can choose the exact area of your garden you wish to water.
How does a hose sprinkler work?
The oscillating sprinkler works on the principle that water provides the power to move the elliptical cam (or heart-shaped cam in some models) which moves the sprinkler arm. Water spins a simple turbine which must be attached to a series of gears stacked up (called a gear train) to slow down the speed of the water.
Why does my water sprinkler not rotating?
The most common reason for a sprinkler to stop rotating is the accumulation of debris in the filter. This video will teach you how to clean the filter on your rotors. Hunter rotary sprinklers operate on a “gear drive” system.
Why does my sprinkler not go back and forth?
Water Pressure or Water Volume If the water level is too low, the distribution bar on an oscillating sprinkler may be unable to move at all, or it may move very slowly to the end of the cycle, then be unable to move past the pivot that sends it back in the opposite direction. (This varies a lot between models.
How do I get my sprinkler to oscillate?
SolutionsCheck for crimps and kinks in your hose and fix where necessary.Try opening your tap more to increase the amount of water flowing to your sprinkler.Try a different model oscillating sprinkler. It may be that the overall water pressure on your home system is too low.
How do I get my sprinkler back and forth?
0:131:38How to Use an Adjustable Length Rectangular Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight center or left left. And right refer to the directions when you're facing the sprinkler fromMoreRight center or left left. And right refer to the directions when you're facing the sprinkler from the end where it connects to the hose.
How do you fix an oscillating sprinkler that won't oscillate?
0:452:16Aligning the Spray Arm on a Dramm Oscillating Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the sprinklers adjustment tabs so they are fully apart push the bar in the direction that willMoreSet the sprinklers adjustment tabs so they are fully apart push the bar in the direction that will realign itself with a black arrow.
How does lawn water sprinkler work?
The sprinkler heads work on a pressure system that when the water goes through the pipe, it pushes them up above the ground. When the water pressure stops, they retract back down to ground level. Sprinkler heads in a garden are usually a raised-head type.
How do I adjust my sprinklers?
0:521:37How To Adjust An Impact Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe trip pin and friction collars determine the spray pattern. Adjust the friction collars to createMoreThe trip pin and friction collars determine the spray pattern. Adjust the friction collars to create watering patterns flip the trip pin up to create a full 360-degree. Pattern.
What is better a sprinkler hose or soaker hose?
Soaker hoses can save up to 80% more water in comparison with sprinkler systems. This also makes them a better option in the months that often bring drought.
How do you fix an oscillating sprinkler that won't oscillate?
0:452:16Aligning the Spray Arm on a Dramm Oscillating Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet the sprinklers adjustment tabs so they are fully apart push the bar in the direction that willMoreSet the sprinklers adjustment tabs so they are fully apart push the bar in the direction that will realign itself with a black arrow.
How do I fix oscillating sprinkler that doesn't oscillate?
SolutionsCheck for crimps and kinks in your hose and fix where necessary.Try opening your tap more to increase the amount of water flowing to your sprinkler.Try a different model oscillating sprinkler. It may be that the overall water pressure on your home system is too low.
How do you repair an oscillating sprinkler system?
0:162:41Cleaning the Spray Nozzle on the Oscillating Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the pin part of the spray arm plug poke through each brass nozzle to clean it. Out replace theMoreUsing the pin part of the spray arm plug poke through each brass nozzle to clean it. Out replace the plug clean-out pin. And test your sprinkler to see if that corrected your problem.
How do you repair oscillating sprinklers?
0:462:05How to Troubleshoot an Oscillating Sprinkler - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply a short burst of spray lubricant to each end of the sprinkler arm if the unit does notMoreApply a short burst of spray lubricant to each end of the sprinkler arm if the unit does not oscillate wipe. Down the sprinkler with a rag corrosion rust and grime may interfere with the sprinklers.
When was the Hozelock system invented?
The Hozelock system has been created by gardeners for gardeners since the invention of the world’s first plastic hose connector in 1959. The system enables you to get water from any tap (both indoor and outdoor) to your garden quickly and easily.
What connectors work best at the tap end of a hose?
There are two types of connectors, Hose End Connectors (2), which work best at the tap end of the system and Aquastop Gun/Sprinkler Connectors (3) that work best at the accessory end of the system. The Aquastop Connector stops water from coming out of the hose when no accessory is attached.
What is a tap connector?
Tap Connectors (1) are a very important part of the system as they turn your tap into the first point of the system. There are connectors for all shapes and sizes of tap including outdoor threaded taps and indoor mixer taps. Hose Connectors play an important role in the system and they are attached to the hose and allow a simple ...
What can I put on my watering hose?
At the end of your hose you will need to attach an accessory that fits your watering needs. This can include Multi Spray Guns, Sprinklers, Nozzles and Lances that provide extended reach.
Can a hose reel be free standing?
Our Hose Storage options come with an abundance of great features to help you to use and store your hose. Keeping it neat and tidy. Our range includes hose reels that can be free standing and/or wall mounted and wheeled for easy maneuvering around the garden. Our innovative Auto Reel can automatically rewind itself into an enclosed, wall mounted unit for ultimate efficiency. All our Reels are available in a variety of sizes to suit your garden.
How to fix a sprinkler that only oscillates in one direction?
A: Check the red setting rings to ensure they are in the correct position. There are two, if one is set near the top, the sprinkler will only oscillate in one direction. This is so you can choose the exact area of your garden you wish to water. To resolve it, push both red setting rings down to their lowest positions to choose maximum area coverage.
How to retract a hose on a reel?
A: Pull out all the hose. Clean any excess debris from the outside of the hose such as sand dirt etc with a damp cloth. Now let the hose retract slowly by walking back to the reel holding the end stop. This often allows the hose to layer properly again. When rewinding the hose always walk the hose back to the reel.
Why is my pond pump not working?
A: The reason for the reduced flow is because the filter needs cleaning. Check that the filter is correctly sized for the pond. Check that the pump is not sitting directly on the bed of the pond as this can cause debris and silt to be circulated. Check that there is not an excessive build up of sludge in the pond if so clean out the pond. Try a different combination of foams e.g. 2 x coarse and 1 x medium instead of coarse, medium and fine. Note with the latest Bioforce ranges (3000, 5500, 8000 and 12000) these can be cleaned by backflushing without having to remove the lid. Refer to the instruction leaflet. Note: – Instruction leaflets can be downloaded from the website by visiting the customer services tab in the top right hand corner.
Where is the UVC pump in a pond?
The UVC and filter are placed together at the edge of the pond connected using the largest bore hose possible to ensure a good flow rate. Pond water is pumped (by the pump) to the filter and UVC and then the water returns under gravity back to the pond.
How to straighten a main supply?
A: To straighten the main supply tubing, lay it in the opposite direction that it has been rolled and put a house brick or something as heavy on each end, leaving for an hour to flatten. Soak the ends of the tubing in warm water, which will soften the plastic and make it easier to insert the connectors.
What is a pond filter?
A: It is a system for filtering, clarifying and maintaining healthy, clear pond water in a garden pond environment. A pond filter system is made up of three main items:
Why does my spray not shut off?
If the spray fails to shut immediately and continues to dribble out it could be due to air being trapped in the lance. To remove any air, hold the lance in a vertical position pointing away from you, toggle the trigger on and off until the air is discharged, then continue spraying. 1.0.0.20. 1.0.0.20.
How old is Hoselock sprinkler?
Hoselock have had many many versions of their sprinklers over the years. I've one which is pretty ancient, at least 15 years old. It rotates first one way then the other on a central stem and there's adjustments for arc, height and reach, all on the outside of this stem.
Can you move a sprinkler to a new position?
Also if you are going to move your sprinkler to a new position don't turn it off but just avoid getting soaked ... I noticed that it is always when the water is turned off that a sprinkler oscillation failure is most likely to happen.