Full Answer
What is a Hudson valve?
How to check if a water valve is clogged?
What happens when a water valve is hooked up to a water source?
How to get float out of a valve?
How much pressure does a water valve need to shut off?
How long are Hudson valves guaranteed?
Why does my Hudson valve hammer water?
See 2 more
What is a Hudson valve?
The Hudson Valves are damage-resistant automatic float valves for water level control This compact, virtually indestructible float valve is well adapted to a wide variety of applications, from personal home use to large-scale industrial use. The Hudson valves are ideal for applications where it is necessary to control the level of water, such as, Aquariums, Grounds Maintenance, Livestock Tanks, Car Washes, Holding Tanks, Ponds, Evaporative Coolers, Irrigation Systems, Swimming Pools, Fountains, Landscaping, Cooling Towers And Much More...#N#Features include: No lever arm; No exterior moving parts; Resistant to freezing; Practically Indestructible; Installs in seconds; No float ball; High volume; Anti-siphon; Rust-proof#N#The Hudson Valve are guaranteed by the manufacturer for two years when used under normal operating conditions. Malfunctioning parts will be repaired or replaced without charge when mailed prepaid back to the manufacturer with proof of purchase.
How to check if a water valve is clogged?
The insert in the body of the valve may be clogged. To check this, remove the cap from the top of the valve. Remove diaphragm and retainer ring. Turn valve over and remove clip (you can use a flat head screwdriver and gently push down and out to do this) and drop float out of the body of the valve. Hold the valve up to the light and look through the metal insert in the center of the body. If it is clogged, flush is out with water. If this doesn’t clear the insert, use a small needle to gently push the debris out. Then flush with water again to clean. There isn’t enough water flow coming to the valve. Your water source must be turned on full volume. We recommend having at least 8 lbs of pressure.
What happens when a water valve is hooked up to a water source?
When hooked up to a water source the valve will allow water to flow through it until the water reaches the bottom of the valve. As the water level rises it causes the float inside of the valve to rise allowing the diaphragm chamber to fill and close the valve.
How to get float out of a valve?
Drop the float out of the body of the valve. To do this, turn the valve upside down. Use a flat head screwdriver and gently push down and out on the clip.
How much pressure does a water valve need to shut off?
The valve has to have more than a trickle of water coming to it in order to get it to shut off. If you have less than 10 PSI of water pressure, your valve may not be getting enough flow to it to make the valve seal. Make sure that your water source is turned on full volume.
How long are Hudson valves guaranteed?
The Hudson Valve are guaranteed by the manufacturer for two years when used under normal operating conditions. Malfunctioning parts will be repaired or replaced without charge when mailed prepaid back to the manufacturer with proof of purchase. Hudson Valves Flow Chart. Pressure-PSI. 10.
Why does my Hudson valve hammer water?
The water hammer can be caused by too much pressure build-up behind the valve. Under high-pressure conditions, installing a pressure-reducing valve before the Hudson Valve may alleviate the problem.
What is a Hudson valve?
The Hudson Valves are damage-resistant automatic float valves for water level control This compact, virtually indestructible float valve is well adapted to a wide variety of applications, from personal home use to large-scale industrial use. The Hudson valves are ideal for applications where it is necessary to control the level of water, such as, Aquariums, Grounds Maintenance, Livestock Tanks, Car Washes, Holding Tanks, Ponds, Evaporative Coolers, Irrigation Systems, Swimming Pools, Fountains, Landscaping, Cooling Towers And Much More...#N#Features include: No lever arm; No exterior moving parts; Resistant to freezing; Practically Indestructible; Installs in seconds; No float ball; High volume; Anti-siphon; Rust-proof#N#The Hudson Valve are guaranteed by the manufacturer for two years when used under normal operating conditions. Malfunctioning parts will be repaired or replaced without charge when mailed prepaid back to the manufacturer with proof of purchase.
How to check if a water valve is clogged?
The insert in the body of the valve may be clogged. To check this, remove the cap from the top of the valve. Remove diaphragm and retainer ring. Turn valve over and remove clip (you can use a flat head screwdriver and gently push down and out to do this) and drop float out of the body of the valve. Hold the valve up to the light and look through the metal insert in the center of the body. If it is clogged, flush is out with water. If this doesn’t clear the insert, use a small needle to gently push the debris out. Then flush with water again to clean. There isn’t enough water flow coming to the valve. Your water source must be turned on full volume. We recommend having at least 8 lbs of pressure.
What happens when a water valve is hooked up to a water source?
When hooked up to a water source the valve will allow water to flow through it until the water reaches the bottom of the valve. As the water level rises it causes the float inside of the valve to rise allowing the diaphragm chamber to fill and close the valve.
How to get float out of a valve?
Drop the float out of the body of the valve. To do this, turn the valve upside down. Use a flat head screwdriver and gently push down and out on the clip.
How much pressure does a water valve need to shut off?
The valve has to have more than a trickle of water coming to it in order to get it to shut off. If you have less than 10 PSI of water pressure, your valve may not be getting enough flow to it to make the valve seal. Make sure that your water source is turned on full volume.
How long are Hudson valves guaranteed?
The Hudson Valve are guaranteed by the manufacturer for two years when used under normal operating conditions. Malfunctioning parts will be repaired or replaced without charge when mailed prepaid back to the manufacturer with proof of purchase. Hudson Valves Flow Chart. Pressure-PSI. 10.
Why does my Hudson valve hammer water?
The water hammer can be caused by too much pressure build-up behind the valve. Under high-pressure conditions, installing a pressure-reducing valve before the Hudson Valve may alleviate the problem.