Instead they use what Paslode calls a "fuel cell". but is actually a very small two stroke engine which fires one ignition stroke for each nail driven, and reloads itself from a small metal can filled with pressurized flammable gas (a mixture of 1-butene and propane). It has a battery pack and a high-voltage power supply, to deliver a spark.
How does a Paslode Impulse engine work?
Paslode Impulse. When the contact tip is pushed onto a piece of work, the lower piston chamber (which also serves as the piston bore) is pushed into the upper part, sealing it. Simultaneously, a metered amount of fuel is squirted into the chamber from the fuel cell. When the trigger is pulled, a spark plug ignites the fuel charge,...
How does a Paslode nail gun work?
Instead they use what Paslode calls a " fuel cell ". but is actually a very small two stroke engine which fires one ignition stroke for each nail driven, and reloads itself from a small metal can filled with pressurized flammable gas (a mixture of 1-butene and propane ). It has a battery pack and a high-voltage power supply, to deliver a spark.
How many nails can a Paslode fuel cell drive?
On the fuel nailer side, Paslode created framing fuel with an All-Season formula. That Paslode fuel cell drives as many as 1,200 nails—even in the cold. Want more? Join our newsletter and get the latest tool reviews every week!
How do you dispense fuel from a fuel cell?
First make certain you are away from any open flames or heating elements. Hold the fuel cell upside down so the black valve is toward the floor. Push the white stem on the black valve several times against a hard surface. Each time you depress the white stem a small “puff” of fuel should be dispensed.
How do fuel cell nailers work?
The battery generates spark at the combustion chamber head which ignites the fuel/air mixture. This rapid expansion of gasses drives the blade down, which shears one nail off the strip and drives it in. The thermodynamic gas effect sucks the driver blade and piston back into its ready position.
How do you use Paslode fuel cell?
0:110:59Paslode Framing Fuel - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou simply turn the adapter counterclockwise install the metering valve with the red circle. TwistMoreYou simply turn the adapter counterclockwise install the metering valve with the red circle. Twist it into position then install the fuel cell. So the adapter lines up with the red triangle.
How long do nail gun fuel cells last?
1,000 to 1,300 shotsWhile fuel cell life can differ depending upon size and application of the tool, most deliver 1,000 to 1,300 shots.
How does a battery powered nail gun work?
A small fan mixes gas and air in a reservoir on the tool, and a spark from the battery ignites the mixture. Force from the internal combustion process powers the piston and driver blade that drives the nail. After each shot, as the tool exhausts and the changes in air pressure reset the piston.
How long does a Paslode fuel cell last?
1,000 rounds eachThe fuel cells are designed to last for 1,000 rounds each, which makes them desirable for heavy duty projects where thousands of nails or staples are needed.
How many nails will a Paslode fuel cell shoot?
1,200 framing nailsOur Cordless Framing Fuel is easy to load and gives you the power to drive up to 1,200 framing nails.
What does Paslode mean?
PAcking Shipping LOading DEvicesPaslode is an acronym for PAcking Shipping LOading DEvices and was founded in 1935. The company develops and manufactures nail and staple guns; either powered by proprietary butane cylinders (in combination with battery power) or an external supply of pressurized air.
How long does a Paslode battery last?
Paslode says the fuel cell will drive approximately 1,200 fasteners, and provides the amazing driving power. The initial battery charge is 1.5 hours and subsequent recharges will range from 5 minutes to 1.5 hours depending on the length of time the battery was discharged.
Why does Paslode gas have a use by date?
There is an expiration date on the gas cell. They might work if expired or they might not. Why does Paslode gas have an use by day? it claims on the paslode gas that the use by day is for “optimum performance”.
What is fuel cell nail gun?
A fuel cell is a small canister of compressed gas that releases energy in conjunction with the tool's trigger being fired. This is especially necessary in larger nailers that require more energy to fire. Taking it one step further, keep in mind that one size doesn't fit all when talking about fuel cells.
Do battery nail guns need oil?
Oil should not be added to cordless nailers. Adding oil will cause the nailer to operate incorrectly.
Is there a nail gun without a compressor?
The advantage of cordless nail guns is that they're the ultimate mobile trim tool. Unlike the pneumatic variety, there's no compressor in the room with you, and you don't have a hose snaking along behind the tool or hanging down from it. You can see why finish carpenters and DIY woodworkers have taken to these tools.
Why isn't my Paslode nail gun firing?
Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The wrong type of Paslode nails are being used.
How many nails are in a fuel cell?
1,200 nailsEach cell drives up to 1,200 nails and is ready to use when the cap is clicked from front to back. Use before the expiration date stamped on the bottom of the fuel cell.
How do you load a Paslode nail gun?
0:092:18Paslode 16ga Lithium Ion Cordless Finish Nailer (Loading and Firing)YouTubeStart of suggested clipEnd of suggested clipBack here is where you're gonna load the fuel you push that lever up and pull down you move the fuelMoreBack here is where you're gonna load the fuel you push that lever up and pull down you move the fuel hose up. You take your yellow pass load fuel you drop it in you push that nozzle all the way.
How do you load a Paslode framing nailer?
0:362:21How To Load A Framing Nailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull the follower. Back. Place your fasteners in the tools magazine. And gently allow the followerMorePull the follower. Back. Place your fasteners in the tools magazine. And gently allow the follower to get behind the nails and push it up to the front.
What is a Paslode Impulse?
Paslode Impulse is a trademarked name for a cordless nail gun. Cordless nail guns do not need an air compressor, manufactured by Paslode. Instead they use what its maker calls a "fuel cell": this is not what is correctly called a fuel cell, but a small metal can filled with pressurized, flammable gas. There is also a battery pack and ...
How is combustion gas stored?
A small amount of combustion gas is briefly stored in a side chamber and is used to push the piston back into the ready position after the nail is driven. After the contact tip is lifted from the work, the combustion chamber opens and a small fan blows away the exhaust gas .
How do gas nailers work?
The main function of how gas nailers work comes down to firing off nails. You can break down the firing process into 9 steps: Press the tip against the work surface. Fuel gets dosed into the system’s firing chamber. The upper cylinder closes (like closing intake valves on a gas engine) and the trigger mechanism is released.
What is fuel powered nailer?
Fuel-powered nailers were another breed. When replacing the air supply of pneumatic framing nailers or finish nailers with a fuel cartridge, getting the piston to return back to the firing position presented one of the biggest hurdles. Prototypes revealed that the rapid heat changes created a vacuum effect.
What drives the blade down?
This rapid expansion of gasses drives the blade down, which shears one nail off the strip and drives it in
How does a gas engine trigger work?
The upper cylinder closes (like closing intake valves on a gas engine) and the trigger mechanism is released. The fan starts up and mixes the air and fuel. Pull the trigger. The battery generates spark at the combustion chamber head which ignites the fuel/air mixture.
Who invented the gas nailer?
We quickly realized we needed to go straight to the source for more information. We called Warren Corrado, product manager for Paslode, the company that invented the cordless fuel-powered nailer. He gave us tons of information regarding how gas nailers work.
What is an O ring fuel nailer?
On previous models, and up until 4-5 years ago, a large O-ring would seal the combustion chamber. This served as the Achilles heel of the system and a major point of potential tool failure. Paslode replaced this in newer models. New fuel nailer systems use a steel ring that increases durability. It also keeps the engine cleaner while it removes a major fault point. Modern fuel nailers can drive around 50,000 nails on average between cleanings.
