The Hayward Poolvergnuegen 2-Wheel Suction PoolCleaner uses your existing pool pump and filter for power – just plug it into the designated suction or skimmer for quick and easy setup. The PoolCleaner has patented self-adjusting turbine blades that deliver maximum power at any flow rate and allow larger, more stubborn debris to pass through.
How does a pool filter system work?
The filter system has a pump that sucks in water from the pool skimmers which then passes it through a sand, DE or cartridge filter to remove any dirt. It then returns clean water to the pool via the water inlets, waterfall etc.
What is an automatic pool vacuum cleaner?
This means you do all of the preparation work yourself but instead of connecting a vacuum head and pole to the pool hose you connect an automatic vacuum cleaner instead. This vacuum head then moves around the bottom of the pool in a random way vacuuming the dirt as it goes. You can go off and leave it running while you do something else.
What happens when you vacuum a pool?
What happens when you vacuum a pool is that, instead of water being sucked in directly from the pool skimmers, a pool hose is plugged in to the skimmer. This is connected to a vacuum head on a long pool pole. The water is then sucked in through the vacuum head from the bottom of the pool as it is pushed around.
Why is my pool filter dirty after I vacuum it?
1. the pool filter is very dirty and in need of backwashing or removing and cleaning if it is a cartridge type filter. 2. you vacuumed too quickly so you disturbed much of the dirt which has become suspended in the water, instead of it getting sucked into the vacuum. The dirt will then settle back onto the bottom afterwards.
How do you use the Hayward automatic pool vacuum?
5:289:41Above Ground Automatic Pool Cleaner Basic Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe cleaner should be moving smoothly across the pool bottom and turning away from the pool wall inMoreThe cleaner should be moving smoothly across the pool bottom and turning away from the pool wall in a timely manner if your hose is being pushed across the pool by the water of the return line adjust.
Why is my Hayward pool cleaner not moving?
There is an obstruction in the cleaner. Remove the consumer inspection plate at the bottom of the cleaner (one self contained screw needs to be loosened) and see if a rock, twig or large piece of debris has stuck between the bearings and turbine. Shake the head of the cleaner to dislodge any internal debris.
How does the Hayward Navigator work?
Navigator® Pro's exclusive SmartDrive® programmed steering moves the cleaner silently in a predetermined series of turns for more thorough cleaning of pool floor, walls* and coves. This automatic suction pool cleaner is powered by the existing filtration system where all debris are captured.
How do you adjust the suction on a Hayward pool cleaner?
0:429:57Hayward Pool Vac XL (Navigator) Tips & Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd kind of keeps the skimmer insert in place in there. So you can address the suction of theMoreAnd kind of keeps the skimmer insert in place in there. So you can address the suction of the Hayward for the skimmer by turning this blue dial here. And that will increase or decrease the suction.
Why does my pool vacuum stay in one place?
If your Kreepy Krauly is often stuck at one side of your pool there are two potential fixes. If the hose is too short then buy another line and have it extended out enough to cover the pool. On the other hand, if it is constantly being coiled then relaxing it or changing how you keep it stored will fix that problem.
Why is my pool cleaner not moving?
If you have a suction pool cleaner that is not moving, check the cleaner hose. It should be firmly attached to the suction line in the skimmer or the cleaner line. If you check these and they are all connected, the next thing to do would be to make sure there are no air leaks in the hose.
How long does Hayward Navigator last?
You can expect the device to serve you for four or five years. It can even last up to eight years with the right upkeep. Although you can find cheaper models that do not offer the same lifespan but given the proper care, you can still expect them to run for at least three years.
Why does my Hayward Navigator go in circles?
Your pool robot is going in circles because its feet are unevenly worn, the hoses are tangled, the swivels are jammed, or there's a broken belt. These issues cause the pool cleaner to lean to one side, making it rotate without moving straight. Check the feet and ensure they're wearing evenly.
What setting do I put my pool filter on to vacuum?
To begin vacuuming your pool:If you have a sand filter and are vacuuming to waste, set filter to “waste” option. ... Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. ... Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.More items...•
Why does my Hayward pool cleaner float?
Your pool cleaner is floating because there's air in the hose caused by a loose coupling, a hose crack, or a worn O-ring. Remove the pool vacuum and inspect the hose for cracks and leaks, then check the couplings to ensure they're snug. Replace leaky sections and it won't float anymore.
Why is my Hayward Navigator moving so slow?
If your Hayward pool vacuum becomes too slow to clean your pool effectively, the vacuum likely has a blockage or the shoes and wings need to be replaced. Shoes and wings have wear indicators for determining when they require replacement.
How do I get algae off the bottom of my pool without a vacuum?
You have to apply borax to the algae-infested surfaces and scrub them really hard with the brush. This will cause the algae to come loose, and you can collect it with a net or scoop it up. The borax will kill the algae and prevent them from growing. This makes it easier to remove the algae completely from your pool.
Why is my creepy crawly not moving?
If Kreepy Krauly is not moving or not pulsating. Check that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached (usually a skimmer). Check for debris in the filter or [pump basket]. Check for debris in Kreepy Krauly flapper.
Why is my Hayward Navigator moving slowly?
If your Hayward pool vacuum becomes too slow to clean your pool effectively, the vacuum likely has a blockage or the shoes and wings need to be replaced. Shoes and wings have wear indicators for determining when they require replacement.
Why is my pool vacuum not working?
When a suction cleaner is sluggish or slow, it's usually a clogged pump basket or dirty filter that is to blame. Other problems include holes in the cleaner hose, sucking air into the hose, or the filter pump could be drawing in air, reducing water-flow volume.
Why is Wanda the Whale not moving?
WRITTEN BY: Inyo Pools If your Pool Cleaner is not moving or is barely crawling it may be clogged with debris. This guide describes how to clear the the debris and check the operation of the Main Turbine that propels the pool cleaner.
How many wheels does Hayward pool cleaner have?
The Hayward Poolvergnuegen pool cleaner is available in two models: a two-w heeled one for 16’ by 32’ pools and a more powerful four-wheeled one for 20’ by 40’ pools.
What is Hayward Poolvergnuegen?
Hayward Poolvergnuegen is a suction-side pool cleaner designed for in-ground pools. Unlike the popular KreepyKrauly, this one moves on wheels.
What is the best suction pool cleaner?
For us, and many pool owners, the Hayward Poolvergnuegen is the best suction pool cleaner .
How to lessen the load on a pool?
To lessen the load on your pool, we recommend buying a canister filter and attach it to the cleaner. It catches leaves and other large debris before they get to the pool filter.
How many angles can a vacuum cleaner turn?
After a set distance, the left wheel reverses for a moment, which steers the cleaner in another direction. The cleaner can turn in five different angles, so it doesn’t keep cleaning the same areas.
Which cleaner is better for climbing?
The 4-wheeled cleaner is better at wall climbing. But the two-wheeled one also goes up the wall, though with a bit of struggle.
Can you set a pool pump to a lower flow rate?
If you have a variable speed pool pump, you can set it at a lower flow rate, and the cleaner will still work fine.
Hayward Poolvernuegen – A Quick Look
When it comes to pool equipment, you will love something with adjustability. The Poolvernuegen comes with three interchangeable throats. You can change out the throats depending on the size of the debris you want the vacuum to work on that day.
What the Users Say
Potentially the best way to find out if a piece of pool equipment is worth the price is to find out what other pool owners think. Researching user reviews can be time-consuming, and some reports are not verified. We researched for you and pulled together a consensus of what people are saying about the Poolvernuegen.
Conclusion
The final verdict on the Hayward Poolvernuegen is that it is an excellent overall suction sided pool cleaner. Suction-side pool cleaners come with a lot of advantages, including that they are simpler to operate than pressure-side pool cleaners and especially robotic models.
How does a pool filter work?
The water is then sucked in through the vacuum head from the bottom of the pool as it is pushed around. The filter then removes the dirt that the vacuum head picks up and returns the clean water to the pool.
When to use a pool filter?
This would be used when the pool bottom is not very dirty. The water would be sent through the filter which would remove the debris and return the water to the pool.
Why do you need to vacuum?
Unfortunately it can only clean the dirt from the water that passes through it .
What happens when you vacuum a pool?
What happens when you vacuum a pool is that, instead of water being sucked in directly from the pool skimmers, a pool hose is plugged in to the skimmer. This is connected to a vacuum head on a long pool pole. The water is then sucked in through the vacuum head from the bottom of the pool as it is pushed around. The filter then removes the dirt that the vacuum head picks up and returns the clean water to the pool.
How do I hook up a pool vacuum?
How do you hook up a pool vacuum? 1 The first I have already mentioned which is to connect it into the skimmer and vacuum from there. 2 Some pools have a dedicated vacuum hose connection which makes hooking up the vacuum even easier and are ideal for attaching an automatic pool cleaner which can then just be left in the pool.
What happens if you use a vacuum to waste setting?
Using the waste setting, “ vacuuming to waste ” the water would not pass through the filter but instead would go straight down the waste pipe to either the sewer system or into the yard/garden.
What to use to get leaves out of pool?
If, like me, you get plenty of leaves at the bottom on your pool then a good leaf rake/net is a must. The Stargoods Pool Skimmer Net gets under the leaves easily.
