Here’s what you need to know:
- Traditional vanities had a height between 30 to 32 inches, maximum. This is considered to be the standard height, even today.
- Modern vanities can reach heights of 36 inches or higher. Many bathroom vanity and cabinet designers call this “comfort height” because it is actually more comfortable today.
What is the standard height of a bathroom vanity?
What is the Standard Bathroom Vanity Height? In the USA today, the standard height of a bathroom vanity is 32 inches. This number is measured from the floor to the top of the vanity sink or countertop. This means the countertop will come up to your waist, depending on your height.
What is the best bathroom vanity height for You?
- Keep 24 inches of space from your vanity to the closest wall. ...
- Make sure that your chosen vanity will be able to access any plumbing fixtures that you need for your sink. ...
- Standard building code says that you need to have at least 18 inches of space from the vanity to the toilet. ...
- Don’t stray too far from your current bathroom’s layout, if you can. ...
What is the standard depth of a bathroom vanity?
Typical homes use a 30 inches, 36 inches, or 48 inches bathroom vanity. The latter size can either be a spacious single sink vanity or a narrow double sink vanity. The standard depth for vanities is 21 inches. Calculate depth by excluding the countertop overhang, if any.
How high to install an outlet above a bathroom vanity?
The National Electrical Code doesn't have any specific requirement regarding the height of a receptacle above a vanity. The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop.
How high should a vanity be above a sink?
Standard Bathroom Vanity Height The standard height of a bathroom vanity is 32 inches or around 2.5 feet.
What heights do vanities come in?
Traditional vanity heights in older homes range from 30 to 32 inches up from the floor. The modern trend is toward higher vanities, up to around 36 inches. For reference, that's the standard counter height for kitchens.
Is 39 inches too high for bathroom vanity?
Tradition says 32" is a proper height for a bathroom vanity. However, trends are drifting towards more comfortable heights of 36" with custom vanities stretching to 40" or even 43".
Why are bathroom vanities so low?
The Shift Away from Standard Height Vanities Kitchen countertops were designed to be at the hip of normal adults to make kitchen prep easy. The only reason bathroom counters were lowered was to make the sink accessible for small children.
What is a taller vanity called?
In recent years, taller, comfort height vanities have come on the scene and become increasingly popular. Comfort height, or counter height, vanities measure to be about 36 inches in height, versus a more standard 30-inch or 32-inch bathroom vanity.
How can I make my bathroom vanity higher?
4 Ways to Raise a Bathroom VanityRaise the Countertop – “High Heels for Your Vanity” ... Add Permanent Legs to Your Existing Vanity. ... Adjustable Cabinet Legs. ... Install a Wood Foundation. ... Raising Wall Mounted Vanities. ... Detaching the Vanity from the Wall. ... Turning Off the Water.
Standard Bath Vanity Height – 32″
Standard bath vanity height is 32″. Generally speaking bathroom vanity countertop height can range anywhere from 30″ -36″. Standard height vanities...
Comfort Height Vanity – 36″
Newer bathroom vanities are following the trend of Comfort Height Bathroom Vanities. Comfort height vanities are taller than standard vanity height...
How Tall Should A Vessel Sink Vanity be? – 30″
Generally speaking, a bathroom vanity will be lowered in order to accommodate for the extra height added by a vessel sink. Vessel sinks typically a...
What Size Bathroom Vanity Should I get?
What size bathroom vanity you decide to get ultimately depends on your personal preference and living circumstances. A majority of new vanities are...
How tall is a bathroom vanity?
The standard bathroom vanity height is 30”-36” tall, and larger vanities only suit big bathrooms. A 32” tall bathroom vanity can accommodate any standard bathroom. You can customize bathroom vanities to the most convenient height for you and your bathroom.
What Is The Standard Height For Bathroom Vanities?
Bathroom vanities have started to diverge when it comes to their heights. There is a traditional height they’re made in, and a more modern height. Here’s what you need to know:
How Wide Is A Typical Vanity Supposed To Be?
Vanities can vary greatly when it comes to their typical width, much more so than their height. Here’s what you need to know about each width.
What Should You Do If You’re Feeling Lost With Your Bathroom Design?
If you’re feeling lost or just don’t know what kind of bathroom vanity measurements your new piece should have, there are two options that you can choose from to help you put together a new bathroom…or at least get a new vanity.
Why do people want higher vanity?
The cool thing about furniture design is that it never stops changing. What would have been the norm 100 years ago isn’t the norm anymore. In many cases, the reason why people want to have a higher vanity has little to do with the fact that people don’t sit down anymore. Rather, it has more to do with the fact that taller vanities look cute.
How to make sure a vanity fits?
The easiest way to make sure that you get a vanity that’ll fit your home is to measure the vanity you currently have, then find a new model with the exact same measurements. Most of the time, this shouldn’t be that hard to do. Most vanities have a fairly set-in-stone range of measurements they can have.
How wide is a single sink vanity?
Single sink vanities are going to be between 24 to 40 inches wide. This is enough space for you to have a sink, several drawers, and a little counter space so that you can set your stuff down while you get prepped. Double sink vanities will be between 48 to 72 inches wide in most cases.
How tall is a bathroom vanity?
A bathroom vanity has a standard height of 30-36 inches, a depth of 20-21 inches and a wide variety of widths depending on the size of your bathroom. Today we will discuss the standard heights ...
How to choose vanity height?
When choosing the standard height for your vanity, always consider the foot traffic of this vanity, the plumbing location and it’s proximity to existing features such as decorative trims, electrical switches and outlets. Remember that plumbing and outlets can be difficult and time consuming to move so choose a vanity that works with these plug-ins.
What is the purpose of a vessel sink vanity?
The purpose of these vanities is not only to provide an accessible countertop but also provide a base for the vessel sinks so that it is much easier to access the sink itself.
How tall is a vessel sink?
The comfort height for a vessel sink vanity is 29-30 inches with a standard height for these same vanities floating around 25-26 inches. For the purposes of installation, keep in mind that vessel sinks themselves will add an additional 5-6 inches.
What is floating vanity?
A floating bathroom vanity is a vanity that is secured at a specific height essentially “floating” the vanity. This provides a vanity that can be installed at both a comfort or standard height level while freeing up space from the bottom of the vanity which provides more installation freedom for the vanity itself. In addition to providing more space, a floating vanity also attains a more modern and contemporary look compared to the traditional vanity, making it ideal for small bathrooms or those in need of additional space.
How tall is a kitchen counter top?
This height has been the standard height for decades and it is very prevalent in older homes. 32 inches is considered to be the best option for large families, especially for those with small children as it provides a tall counter-top but still can be accessed by those of short to medium stature.
Do floating vanities have a grounding base?
Also, it is important to maintain and check on the integrity of the bolts you have installed with the vanity to ensure that it is secure as it does not have a grounding base to rest on.
How tall is a bathroom vanity?
When it comes to height, standard bathroom vanity dimensions vary from 30 to 32 inches (76 – 81 cm). Several decades ago, when there was only one bathroom in the house, the height of this piece was adjusted so that the children were able to use it.
How deep should a vanity be?
If your bathroom is tiny, or you want to mount the bathroom vanity in your powder room, you should pick out the 16 or 18 inches (40.5 – 46 cm) deep model. It will visually make the space larger.
How wide is a single sink vanity?
Most of the single sink vanities are 30 to 48 inches (76 cm – 1.2 m) wide . The most expansive bathroom vanity dimensions usually come with the double sink vanities. In the US, the standard for double sink vanity is from 60 to 72 inches (1.5 – 1.8 m). Of course, you can purchase a double sink vanity if your bathroom is spacious.
What is the purpose of installing a bathroom vanity?
At the same time, modern design and adequate bathroom vanity dimensions will enable you to create the atmosphere you like. This multifunctional piece will support the sink, hide the plumbs, and provide the most needed storage space in this room.
How far away from the floor should a vanity be mounted?
This model has a modern design, and it is mounted in the wall, at least 12 inches (30.5 cm) away from the floor. This way of installing creates an impression of more space. Plus, you can quickly maintain the floor beneath since there will be no obstacles when you clean. Still, you should be careful not to store heavy objects in this type of vanity.
How high should a kitchen cabinet be for a vanity?
It is possible if you have a higher model since most of the standard kitchen cabinets are 36 inches (91.5 cm) high.
Why do you have a closed bottom vanity?
The closed bottom will give you more space for storage and less space to clean. On the other hand, it will be easier to wipe the excess water from the floor when you have the open bottom vanity. In that case, water won’t go underneath and cause damage. It’s up to you to choose the model you like more. 2.
How high is a standard bathroom vanity?
To give you an idea, a standard vanity with an 8-inch high vessel sink is between 22 and 36 inches. To choose the right height, find out who in your household is ...
What is the Standard Bathroom Vanity Height?
In the USA today, the standard height of a bathroom vanity is 32 inches. This number is measured from the floor to the top of the vanity sink or countertop. This means the countertop will come up to your waist, depending on your height. However, the standard height is now increasingly becoming replaced by the newer 36-inch vanities – perhaps because people are getting taller?
What is a Bathroom Vanity?
A vanity is a functional type of cabinet with multiple shelves, which in some cases holds the sink and almost always features mirrors.
What is the Height of Comfort Bathroom Vanity?
The newer bathroom vanities that have emerged in the market now have a standard height of 36 inches, which makes them 4 inches taller than the old-style standard vanities.
What is the Standard Height of Floating Wall Hung Vanity?
Just like the vessel sink vanity cabinets, the standard height of floating wall vanities are also around 32-inches. But you can nowadays find new wall-hung vanity units that are as tall as 36 inches from the floor to the countertop.
What is a freestanding vanity?
The freestanding vanity is sometimes referred to as vessel sink vanity. The sink of this unit sits on top of the vanity’s countertop. Unlike the normal bathroom vanity designs, the sink is not built into the vanity so the height differs.
How wide is a double sink vanity?
The most common widths start from 24 and go up to 72 inches. Most single vanities are between 24 and 48 inches, while the double vanities are between 60 and 72 inches wide. However, in recent years, double sink vanities with widths of 54 inches have gained popularity as they can easily fit compact bathrooms.
Standard Bathroom Vanity Sizes
See this freestanding white double sink vanity on Etsy. It’s standard height at 32 inches (81 cm) and 60 inches (152 cm) wide from 90210 Kitchen Bath.
Bathroom Vanities for Tall Folks
See this 37-inch (94 cm) High Grey Bathroom Vanity with Quartz Countertop on Amazon.
Are There Codes for Bathroom Vanity Height?
There are currently no legal regulations for how tall a bathroom vanity should be, but the National Kitchen and Bath Association recommends a wide range of heights from 32 inches (81 cm) to 43 inches (109 cm) to accommodate a variety of people.
Types of Vanities and How They Measure Up
Bathroom vanities should perfectly blend storage, utility, and style. Finding the right vanity for your bathroom may take time but you’ll appreciate the end result if you can achieve the right balance.
How to Add Height to an Existing Bathroom Vanity
If you’re not yet ready to invest in an entirely new vanity but are tired of leaning over to wash your hands, you would probably benefit from lifting your existing vanity a few inches.
What Size Bathroom Vanity Will You Get?
A new vanity can liven up your bathroom and create an entirely new aesthetic. Before buying a new vanity, consider how large the piece of furniture should be and whether you want a taller-than-standard countertop.
How tall is a bathroom vanity?
The standard bathroom vanity height is 32 inches. Depending on how tall the user is, this height puts the surface of the countertop at waist high. Or it can even a bit lower than that.
What is the average bathroom vanity size?
So, the depth of most of the bathroom vanities in the market nowadays varies around the standard size. (from 20 to 23 inches.) But you can select a perfect vanity that goes with your preferred bathroom layout.
How to Find the Right Size Bathroom Vanity?
If you are designing a guest bathroom or a common bath, you will mostly need a single sink vanity, which sizes range from 18 inches to 48 inches. If you have more space, you can use the extra space on the countertop for toiletries.
What is the standard size of a bathroom sink?
(The standard sink height of an ADA compliant bathroom should be 34 inches maximum.)
How wide is a vanity?
Typical cabinet width starts from 24 inches to goes like 30, 36, 48, 60 and 72 inches. The standard vanity height varies from 30 inches to 36 inches. Depth usually varies from 20 to 24 inches. These sizes can be customized, depending on the type of vanity and the sink you plan to install.
How many styles of bathroom vanities are there?
Based on these dimensions, bathroom vanities come in two styles.
How deep should a vanity be in a corner bathroom?
But as per your preference, you can go for an 8-inch vanity too. For a typical corner bathroom, vanity depth ranges from 24 inches to 18 inches. To get a clear idea you have to measure the vanity depth. It should be measured from the back to the front of the box and the thickness of doors and drawers.
How tall is a bathroom vanity?
Standard Height: The standard bathroom vanity height has always been 30 to 32 inches. If you have children or are not on the taller side, then the standard height will be perfect.
What is a minimalist bathroom vanity?
Minimalist: With clean lines and minimalist hardware, you can achieve a spa-like look with your bathroom vanity. A sleek and modern vanity will always add an eye-catching element to your bathroom.
What is the average width of a single sink bathroom?
Single Sink: The average bathroom vanity width for a single-sink is between 30 and 48 inches. Single-sink vanities are perfect for bathrooms with more limited space. It is also great for guest bathrooms where you don’t need loads of storage space.
What is floating vanities?
Floating: A recent trend that can be seen in lots of modern bathrooms are floating vanities. These types of vanities give a bathroom a streamlined, modern look and feel.
How wide is a double sink?
Double Sink: The average width for a double vanity ranges between 60 and 72 inches. Double-sink vanities are fantastic for couples who share a bathroom. It also works well in master bedroom en suites and main bathrooms that the entire family share. You will, however, need space for this type of vanity.
What is flow of traffic in a bathroom?
Flow Of Traffic: Think about the way the bathroom is typically used. Cabinet doors and drawers are always opening and closing, so you will need to be sure there is plenty of room to access all of your storage.
What is the most important decision when it comes to your vanity?
The most important decision when it comes to your vanity is determining the measurements. Here are some of the more crucial measurements you need when choosing your new vanity:
