Knowledge Builders

how high should a deer trough be

by Mrs. Melissa Runolfsson Published 3 years ago Updated 2 years ago
image

The sides of the roof should be 72 inches or more off the ground to keep any bucks in velvet from hitting their antlers. The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder.Apr 26, 2013

Full Answer

How tall should a deer gravity feeder be?

42-inchesFeed ports stand at an optimal height of 42-inches.

Are trough feeders good for deer?

Automatic feeders definitely have their place, but some managers find the simplicity of an open, trough-type feeder the best option. Another benefit from these open station trough feeders is the utilization by all age classes of deer.

How do you build a trough for a deer feeder?

2:526:13How to Build a Covered Wooden Deer Feeder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThese cleats are going to be used to secure the feeding trough to then laid out a pre-drilled eachMoreThese cleats are going to be used to secure the feeding trough to then laid out a pre-drilled each screw locations for all cleats.

How do I keep raccoons out of my gravity feeder?

0:592:27How to Keep Raccoons Away From My Deer Feeder - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet up traps around your deer feeder raccoon traps available at most home and garden stores shouldMoreSet up traps around your deer feeder raccoon traps available at most home and garden stores should be at least 12 inches by 12 inches by 32 inches almost. Anything can be used as bait.

Do deer feeders spook deer?

WHAT TYPES OF DEER FEEDERS SCARE DEER? Because not all spin feeders blend in with the natural surroundings, you may wonder if even their existence will scare deer away. Although these feeders seem like they have the potential to scare deer, they actually attract them.

How long does it take for deer to get used to a feeder?

around three weeksIt normally takes around three weeks for deer to get used to a feeder. During this transition phase, you should avoid doing any maintenance work on your feeder and let the herd get accustomed to their new food source.

How far off the ground for a deer feeder?

The sides of the roof should be 72 inches or more off the ground to keep any bucks in velvet from hitting their antlers. The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder.

How do you build a deer water trough?

1:194:18How to Make $15 Watering Hole for Deer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAreas it's about directing traffic you want that deer to go from its bed to your water hole. Then toMoreAreas it's about directing traffic you want that deer to go from its bed to your water hole. Then to a staging area or a smaller food source then on out into a major food source once it gets dark.

How do you get deer to come to a feeder?

An important step of how to attract deer to your feeder is to introduce corn, then mix in pellets gradually. Once you've picked out a prime location, set up the feeder. Even if you'll be using pellets, the form which most supplemental nutrition comes in, start out with corn. Scatter a bag around the feeder.

Will raccoons keep deer away?

Raccoons can cause an immense amount of stress to a deer herd. If you use trail cameras to monitor-survey or on bait sites, you will most likely document raccoons frequently visiting the sites you established for deer. Raccoons are very aggressive towards deer and will even run off mature bucks from bait locations.

How do you varmint proof a deer feeder?

1:083:02Varmint Proof Deer Feeder - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then after you get all the yellow insulators in you just kind of back and forth with theMoreAnd then after you get all the yellow insulators in you just kind of back and forth with the electric fence wire being sure to get it real tight. And not let it touch. The legs to ground itself.

How do I keep squirrels and raccoons out of my deer feeder?

0:002:11How I protect deer feeder from being robbed by birds & squirrels - YouTubeYouTubeStart of suggested clipEnd of suggested clipI had to put a bailing string around the top because the squirrel. Was fitting in through there andMoreI had to put a bailing string around the top because the squirrel. Was fitting in through there and getting at it. But the proof that this thing is working is because there's corner in this platform.

What is the best protein for deer?

The Top 5 Proteins Proven To Grow Big Bucks In The Off SeasonTecomate. ... Double Down Deer Feed. ... Lyssy & Eckel Feeds. ... Sportsman's Choice and Record Rack. ... Purina AntlerMax Deer 20.

How do you build a deer water trough?

1:194:18How to Make $15 Watering Hole for Deer - YouTubeYouTubeStart of suggested clipEnd of suggested clipAreas it's about directing traffic you want that deer to go from its bed to your water hole. Then toMoreAreas it's about directing traffic you want that deer to go from its bed to your water hole. Then to a staging area or a smaller food source then on out into a major food source once it gets dark.

What is a deer feeder used for?

Deer Feeder: A tool used to supply feed, usually in the form of grain (corn) or a specially blended deer/wildlife feed for nutrition, to deer or wildlife in supplemental feed programs.

What is a cow trough?

A water trough is the “final” component in a livestock watering system. In its simplest sense, a watering trough is merely a water container, and anything that holds water without affecting its quality can probably be used as a watering trough.

1.How high should a deer trough be? - nsnsearch.com

Url:https://nsnsearch.com/qna/how-high-should-a-deer-trough-be/

25 hours ago How high should a deer trough feeder be off the ground? The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder. The dimensions of the trough pictured are about 2ft wide and 5ft long.

2.How high should a deer feeder be off the ground?

Url:https://thecrucibleonscreen.com/how-high-should-a-deer-feeder-be-off-the-ground/

16 hours ago  · How do you make a deer feeder? The sides of the roof should be 72 inches or more off the ground to keep any bucks in velvet from hitting their antlers. The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder.

3.How high off the ground should a deer feeder be?

Url:http://letto.jodymaroni.com/how-high-off-the-ground-should-a-deer-feeder-be

21 hours ago Similarly, it is asked, how high should a deer trough be? Ideally, the roof is at least 72” or more off from the ground. Use any second-hand metal for the roof of the deer feeder. On the other hand, the trough should be at least 24” from the ground. …

4.trough feeder height HELP | GON Forum

Url:https://forum.gon.com/threads/trough-feeder-height-help.706767/

2 hours ago  · 35" high keeps out hogs. My trough is 35" to the lip. I've watched deer of all sizes use it. We've got lots of hogs and I've never seen one approach the trough. The legs of mine are 4"x4" and they are sunk a foot into the ground. NO sign of …

5.How high can deer comfortably feed? | GON Forum

Url:https://forum.gon.com/threads/how-high-can-deer-comfortably-feed.680821/

30 hours ago  · 42 inches high is the ideal height. You cannot place a gravity feeder high enough that a raccoon cannot access it & still have a deer able to reach it. Even with these, the coons will hang from the tubes

6.Feeder trough height question... - ALDEER.COM

Url:http://www.aldeer.com/forum/ubbthreads.php?ubb=showflat&Number=2127284

8 hours ago  · Ground slopes a little, short end is 17" to top of sides (2X6), higher end is 22'. Fawns can reach the short end. I also use a fawn feeder much like a calf creep feeder that excludes grown deer from the feed. I see fawns walk inside it and feed.

7.How high should a boss Buck feeder be? – Ventolaphotography.com

Url:https://ventolaphotography.com/how-high-should-a-boss-buck-feeder-be/

19 hours ago How high should a deer trough be? The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder. The dimensions of the trough pictured are about 2ft wide and 5ft long.

8.How high should a gravity feeder be off the ground? - NSN search

Url:https://nsnsearch.com/qna/how-high-should-a-gravity-feeder-be-off-the-ground/

36 hours ago How tall should a deer feeder be off the ground? The sides of the trough should be around 24 inches off the ground to allow fawns to access the feeder. The dimensions of the trough pictured are about 2ft wide and 5ft long. How high should a deer stand be? Most bowhunters hang treestands 17 to 20 feet up the tree. However, that’s a general rule, and doesn’t apply to every …

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9