How high should a shower diverter be?
Shower Valve Height 1. Showers set in bathtubs The tub shower valve height is 28 inches (2 feet 4 inches) from the floor for showers set in... 2. Showers set in a shower stall
What is the best shower head height?
Jan 10, 2020 · Similarly one may ask, what is the standard height of a shower diverter? Industry standards place the showerhead at an average of 80 inches high, or 6 feet, 8 inches, but it can be higher or lower based on your preference. Diverter controls, when not on the tub spout, should be set just above the controls that turn on the water.
What is the standard height for a shower fixture?
Oct 19, 2020 · What Height Should a Shower Valve and Spout Be Set At? Considerations Before Installation. There are a few factors you should consider before installing a shower valve and... Standard Shower Height. Generally, it's recommended that shower valves be installed around 38 to 45 inches above ground. ...
What is the correct height to install a shower valve?
The instructions include suggested dimensions for an installation for a 6' tall person. The height of the centerline of the valve is 39-3/8" and the height of the center of the showerhead is 82-7/8". The Hansgrohe Showerpipe 360 showerpipe has the centerline of the valve at 43-1/4" and the center of the showerhead at 82-5/8".
Where should a shower diverter be placed?
Typically the diverter is installed around 10-15" above the mixing valve control but in fact it doesn't even have to be installed on the same wall! Some people choose to install the diverter just inside the shower door for easy access.
How high should a shower tub valve be?
Shower Valve Height A height of 28 inches, or 2 feet 4 inches, is standard for valves in bathtub shower units. For shower stalls, install the valve at the standard height of 48 inches, or 4 feet. Install faucets at the same height as the valve, equidistant from the valve.
What is the distance between shower valve and diverter?
The minimum recommended distance from pressure balance valve to diverter • valve is 8” (203.2 MM). Refer to table for the installation distance from the center of the diverter valve outlet port to finished wall.
How high should spout be above tub?
The tub spout will generally be located 4 inches above the rim of the tub. In a shower only unit, the faucet is placed higher at 48 inches off the floor. The shower head normally is located 72 to 80 inches above the finished floor.
How far should tub spout be from shower valve?
The ideal distance between the tub spout and shower valve is six to 11 inches. Are you now wondering how to rough in your shower over the tub? Know that the tub spout should sit about four inches above the tub's rim.
How far should tub spout be from valve?
Measure the distance between the tub spout and the valve. The tub spout can be no less than six inches and no greater than eleven inches below the valve. If the measurement does not meet these criteria, it can cause this to occur. There should only be one elbow from the tub port of the valve to the tub spout.
How far should shower drain be from wall?
Discharge hole (vertical): Drain located at floor height; distance is zero. Fixture (side to side buffer): Measured from center of the toilet to either side, minimum. clearance is 15 inches to any wall or other fixture; 18 inches is recommended if the bathroom layout allows for this.Dec 30, 2021
Does shower head need to be centered?
If your shower head isn't centered, the water could drench your entire bathroom floor space. And if you mount the shower head more towards a window or the wall, you would barely be underneath the water, making it a very unsatisfactory shower.
How high should a shower valve be above the tub?
If so, the valve should be installed 8 to 18 inches above the tub spout to accommodate seated bathers. Showerheads should be installed 80 inches above the shower floor; however, appropriate heights can vary based on the showerhead.
What is an S shower arm?
For example, an S shower arm is a solution that is inexpensive and easy to install and will raise the height of the showerhead without moving the installation site. If there is no room for an S shower arm or if the showerhead needs to be lowered, a swivel ball adapter may be best suited to your needs.
How high should a shower spout be?
A shower valve and spout should be about 38 to 45 inches above ground. If you also have a bathtub, the valve should be installed 8 to 18 inches above the tub spout.
What is a rain shower head?
Rain showerheads are designed with a long arm so that the water will pour directly over the user's head. Ideal for users of varying heights and showers with low ceilings, a rain showerhead is meant to simulate rainfall.
Do shower spouts vary by brand?
While appropriate shower spout and valve heights do not necessarily vary by brand, they do vary by type. Always check user instructions on the showerhead and valve for recommended heights. If nothing is listed, consider these general recommendations for common showerheads.
Is it too late to install a shower valve?
When installing shower fittings, the proper height is often overlooked until it is too late. The height of the shower valve and spout is critical to ensure ease and comfort when using the shower. If set too low, showering can be uncomfortable and challenging, and if set too high, they could be hard to reach properly.
height of valve and diverter
We're almost ready to do plumbing and aren't sure how high to set the valve and diverter for the handheld along with the handheld and the showerhead.
Comments (20)
You have a shower now, yes? Is it comfortable? Most place a shower head at about 72 inches. Always pull the resrictor out of the head, hate to say that, but DO IT. Stand in there is my advice, and put your hand out for a placement of handheld. Kids grow too fast to even worry on that, and once placed? You;re done. They'll be fine under a hand held.
What are some examples of bathroom fixtures?
They come in a variety of materials and designs. Examples of bathroom fixtures include bathtubs, bidets, drinking fountains, janitor sinks, and kitchen sinks.
How high should a shower head be?
Shower heads are located at a standard height of 80” (203 cm), but can be set at a minimum height of 72” (183 cm) if desired. Shower controls should be placed at a height 40”-50” (102-127 cm) above the shower floor and out of direct line of the water path to avoid being caught in extremely cold or hot water when operating.
Do you have to adhere to a shower head code?
If there are regulations governing installation, your dilemma is resolved for you before you begin. In most cases, however, there are no codes to adhere to regarding the shower head and control valve height, so common sense and good planning must prevail.
Can the tallest person in the household get his head under the water?
The tallest person in the household shouldn't have to duck to get his head under the water stream and the shortest person using the shower should be able to reach the shower head.
How many different types of shower diverters are there?
There are three different types of shower diverters: Three-valve diverter – These are usually found when there are separate knobs for hot and cold water. After you find the right combination of hot and cold water, you turn the third handle clockwise to send the water to the showerhead. When you’re done showering, ...
What is the plumbing part of a shower called?
But have you ever wondered how the water makes it way up to showerhead? It’s thanks to a plumbing part called a shower diverter. Knowing how it works isn’t just fun trivia – it can help you identify an issue in your bathroom before it impacts the hot showers you know and love.
How to redirect water to tub when showering?
When you’re done showering, turn the handle counter-clockwise to redirect the water to the tub. Two-valve diverter – This type of diverter is usually found with a single-handle faucet. The larger handle on the assembly will control the temperature while the smaller handle or level will control the direction of the water.
What is the phone number for Rick's Plumbing?
Instead, call the plumbing pros at Rick’s Plumbing. We proudly serve New Haven and Fairfield Counties in Connecticut. You can reach us at (203) 874-6629.
How many ports does a shower diverter have?
As mentioned above, the diverter valve has 4 ports. One inlet port, and 3 outlet ports. When adding a hand shower to your shower system your plumber will use all 3 ports. Remember with a 3-setting diverter trim kit, 1 of the valve outlet ports is plugged/capped.
What is a shower head with body jets?
Shower systems with body sprays, hand shower, and ceiling mount showerhead offer the ultimate luxury experience. A rain shower head with body jets offers a fully immersive shower experience. Switching to a ceiling mount shower head is actually easier than you might think, especially if your bathroom is under construction. Instead of running the pipe up to the point in the wall where a normal style showerhead would come out, the plumber runs the pipe up into the ceiling, then stubs it out the same way as normal. Instead of an angled shower arm like you would have with a wall mount showerhead, a ceiling mount showerhead requires a straight arm. In fact, the ceiling mount showerhead itself is the SAME as a wall mount showerhead. It's basically just the shape of the shower arm that is different, so you can order any showerhead you want. Typically, people choose a large single setting rain showerhead for the ceiling but you can use any style you like. You just need to make sure you have a straight ceiling mount shower arm. If you always wanted a large overhead rain shower with body jets and hand shower, you just need to take what you learned about shower systems above and order a ceiling mount appropriate shower head plus get a straight ceiling mount shower arm instead of a normal wall mount style shower arm. If you only want a ceiling mount shower faucet with body sprays and don't need a hand shower spray, just go back to a 3-setting diverter trim kit and leave the hand shower out. Simple! Once you get a feel for how the components go together, you'll see that there are many many possibilities.
How does a 6 setting shower diverter work?
A 6-setting shower diverter allows you the ability to turn on any individual spray group by itself or any 2 spray groups at the same time. See the diagram above which illustrated all 6 spray setting options. When you want a shower head with body jets and a hand shower, you need a way to control them all. As mentioned above, the diverter valve has 4 ports. One inlet port, and 3 outlet ports. When adding a hand shower to your shower system your plumber will use all 3 ports. Remember with a 3-setting diverter trim kit, 1 of the valve outlet ports is plugged/capped. In the case of a 6-setting diverter trim kit, all 3 valve outlet ports will be utilized. A pipe will be run from port 1 to wall mount showerhead, from port 2 to the hand shower drop elbow, and from port 3 to the body spray pressure loop. The 6-setting diverter trim gives you the power to select which spray outlet you want to be running. This fixture is important if you want a full shower jet system with hand shower as without it, you'd have no way to turn everything on!
What is spray setting 2?
Spray setting 2 would be the group of body sprays only. Finally, spray setting 3 would be both showerhead and all body sprays at the same time. The diverter sends the warm water to the spray groups and lets you control which spray groups are on at any given time. This component is required for all multi jet showers.
How many body sprays are needed for a Delta shower?
A shower head with body spray system would not be complete without the body sprays themselves! When working with a Delta body jets shower system you can have up to 4 body spray heads. In a Delta shower with jets they recommend you do not run more than 4 body sprays from a single diverter port as you could experience water pressure issues. Depending on how many body sprays you want, the layout will be different. Later in the article you will see some examples of shower body spray layouts for systems with 3 or 4 body sprays. The pressure loop in the wall will need to be adjusted based on the number of sprays you want. When considering the shower jet installation, you will learn that some body sprays have a rough-in valve and others do not. Some sprays connect directly to a stubbed-out pipe (similar to a shower head) while others have their own valve piece. Delta Hydrachoice body sprays do use a rough-in valve which helps lower the overall water usage while at the same time boosting the spray pressure. Keep reading more to learn about the difference between normal and Hydrachoice body sprays. Later in the article you will also see some body spray plumbing diagrams. After selecting the perfect Delta shower jets you'll be well on your way to the shower system of your dreams!
What is a multi jet shower?
Multi-jet shower systems require the addition of a diverter fixture which provides a way to control which spray outlets are "on" at any given time. A body jet shower system requires additional pipes to be run inside the wall to deliver water to each of the shower's spray outlets.
How do I add body spray to a shower?
Before you can think about adding body sprayers for a shower you need mix the hot and cold water. Therefore you will need a shower control and mixing valve. In any standard home, you're going to have a hot water line and a cold water line. The hot water line runs from your hot water heater which is kept at a very hot temperature so it's ready on demand. In fact, the water in your hot water heater is too hot to use directly in most cases. For body spray shower systems you will want the water to be a comfortable warm temperature. Therefore, the hot water must be mixed with cold water to a suitable temperature. The mixing valve inside the wall is connected to the hot and cold water lines. The shower cartridge (part of the trim kit) helps to regulate the temperature of water mixed in the valve. Once it has been mixed to a nice warm temperature, the water runs up from the mixing valve into the diverter where it can be set out to the showerhead and body spray jets. For highest water flow, Delta recommends you use their Delta MultiChoice high flow (HF) universal rough-in valve as the base for all shower systems to ensure optimal pressure. Keep in mind, if you plan to add a tub spout, you cannot use the HF valve as the bottom port is permanently capped (read more below). In addition to the high-flow rough-in valve, the shower cartridge included with the trim kit also plays a role in the water pressure your shower head and body jets will put out. Especially for a shower faucet with body jets, you may want to consider a Delta thermostatic 17T series cartridge as it allows for the highest flow rate. To start building your shower with jet sprays you will need a mixing valve and trim kit.
How much space between shower head and valve?
In a shower stall with a head set at 72 inches and a valve set at 48 in ches, the piping between the fittings is 24 inches, or 2 feet. In a tub with a head at 72 inches and a valve at 28 inches, the space between the fittings is 44 inches, or 3 feet 8 inches. The spacing between these elements can vary. For instance, if you install a valve at 48 inches but move the head to 76 inches, then 52 inches of space exists.
Why do showers need lower valve heights?
Showers set in bathtubs require lower valve heights because the valve must connect to both the shower and the bath tap.
How high should a shower head be?
The minimum standard height for a showerhead is 72 inches , but the general recommendation is to set it 80 inches above the shower pan. At that height, everyone can stand under it, even very tall people.
How tall should a plumber be?
For instance, though sources recommend 72 inches as standard for heads, with 76 inches as preferred by some, if someone in your family stands 6 foot 5 (77 inches) tall, you need a higher head. Ultimately, you can install fittings at any height that makes you comfortable as long as you adhere to local plumbing codes.
Where is Gish from?
Gish has a Bachelor of Arts in art history from University of Massachusetts, Amherst.
Can you wash your hair with a head set too low?
A head set too low can make washing your hair incredibly difficult. Improperly set faucets at hard-to-reach heights will require you to bend over or reach up high to turn water on and off and adjust the temperature. By following a few guidelines, you will be able to set your fittings properly. Advertisement.
How to erase a gap in a spout?
If you've got a gap of 1/2 inch or less after you tighten the spout as far as it will go, the best way to erase it is to fill it with silicone caulk. Choose white caulk or one that matches the wall color, spread a thick enough bead to fill the gap, then tool it with your finger to give it a concave shape.
How long should a copper tub spout be?
For slip-on tub spouts, your copper pipe should be a minimum 1" and a maximum 2-7/8" in length , depending on the tub spout. Refer to the manufacturer's specifications prior to purchasing and installing to ensure you have the appropriate length for your spout.
How high is the shower head?
In a shower only unit, the faucet is placed higher at 48 inches off the floor. The shower head normally is located 72 to 80 inches above the finished floor. Click to see full answer.
