What is the standard height for a washing machine outlet?
Similarly, it is asked, what height should a washing machine outlet box be? And the standard height for a washing machine outlet box is 42” in our area. One may also ask, what is the height of a washing machine? The standard full-size washing machine is approximately 27 inches wide, this is for both top and front-loading washing machine equipment. The height varies between 35-43 inches.
Are all washing machines the same height?
Washing machine height is the same on virtually all washing machines. Out of the 33 washing machines I checked only 3 were less than 85 cm high. And they were only fractionally lower. They were 84, 84.5 and 84.8 cm. If you need one to be quite a bit lower you may be able to get around it.
How to choose a washing machine outlet box?
Washing Machine Outlet Boxes For Mobile Homes – 9 Shopping Factors
- Water Supply & Drainage Configuration. The first thing you should check before even deciding which type of box you want is the restrictions that may be present at the ...
- Type of Valve – Quarter Turn Valve v/s Single Lever. What type of valve do you want your outlet box to have? ...
- Structural Considerations. ...
- Compatibility with Different Connector Types. ...
How to install washing machine outlet box?
How to Install a Washing Machine Outlet Box
- Identify and prepare the installation area. Decide on a location between two wall studs straight at the rear of the washing machine to set up the outlet box.
- Safeguard the Washing Machine Outlet Box. ...
- Connect the Water Supply Lines. ...
- Connect the Washing Machine Lines. ...
- Cover the Outlet Box. ...
How high above the floor should a clothes washer standpipe be?
trap serving a clothes washer standpipe shall be on the same floor not less than 6" above the floor nor greater than 18"
How tall is a clothes washer?
Since most clothes washers back are 42" tall I usually put the bottom of the box at 42" so the valves & drain connections can be accessed.
How high should a P trap be?
There’s lots of confusion on this specific code height and as a union plumber who studies code I can confirm that the Local “California”code states the P-trap needs to be 6”-18” on center off Finish floor and from the (CENTER) of the trap the standpipe can rise 18”-30” above that. So if your trap is at 6” you can run a standpipe 30” above center of trap which leaves top of standpipe at around 36”... just giving multiple examples. That Center measurement off the trap is huge and people don’t quite understand that part. That’s why 6” is minimum trap height because the max standpipe height above that is 30” putting you around 36” above finish floor and being heigher than 34” flood level of a sink or anything downstream in case of a backup it won’t spill out the standpipe
How high should an outlet box be?
Standard Height for Outlet Boxes. The standard height for wall outlet boxes is about 12 inches from the top of the floor covering to the bottom of the receptacle box (or 16 inches to the top of the box).
How high should an outlet box be above the floor?
Residents in wheelchairs may benefit from slightly higher outlet boxes, with the bottom of the box no less than 15 inches above the floor. On countertop outlets, it is standard to install outlet boxes so the tops are between 15 and 20 inches from the countertop surface.
How long is a 16 oz hammer?
Most 16-ounce hammers are about 13 inches long. Set the hammer on the floor with the head down, then set the box on top of the hammer handle, resulting in a roughly 12-inch high outlet height after the floor covering is installed.
Why is it important to have uniform heights for electrical outlets?
Setting electrical outlets and wall switches and standard, uniform heights is important both for ease of installation, and for the convenience of users.
How high should a wheelchair be?
For wheelchair users, 48 inches is usually specified as the maximum height, since higher levels can be difficult to reach when sitting in a wheelchair. In these situations, it is fine to position them slightly lower—with the bottom of the box 44 inches above the floor, for example). The Spruce / Kevin Norris.
How high should a wall switch be?
The standard height for wall switches in most rooms (excluding those over kitchen counters) is 48 inches above the top of the floor covering (measured to the bottom of the box). For wheelchair users, 48 inches is usually specified as the maximum height, since higher levels can be difficult to reach when sitting in a wheelchair. In these situations, it is fine to position them slightly lower—with the bottom of the box 44 inches above the floor, for example).
Why is it important to set standard box heights?
Setting standard box heights is also important in terms of access and ergonomics. Irregular heights for light switch heights, for instance, can be disorienting. Boxes placed too high or too low can be inconvenient or even inaccessible to disabled or elderly residents.
