Finger jointed pine is a softwood timber material that is made by joining smaller pieces of pine wood tightly together using a finger joint, which is made by interlocking sections of wood that look ‘like fingers’ and securing them with glue to form a tight bond that looks like a zig-zag pattern when inspected closely (though when painted, the joint is largely invisible).
Do you need to create finger jointed pine?
Another reason you may need to create finger jointed pine could be because you made an error in cutting your wood. Since you don’t want to waste the wood blocks you have, a quick and easy fix is creating a finger joint cut on the wood.
Why was finger jointed pine wood invented?
The bad parts of the wood could be removed and interlocked with other good wood parts. Finger jointed pine was invented to sell longer pieces of wood that fit together perfectly at a lower cost. The comb-like construction allows pieces of wood to be put together to form a longer piece of wood.
What is finger joint lumber and how is it made?
Finger joint lumber was the lumber industry’s way of creating the long pieces of wood that we need for non-structural things like trim and casings. Sure you can buy non-finger joint versions which are usually called stain grade, but they cost a lot more than their finger jointed cousins. Why? How is Finger Joint Lumber Made?
What is finger joint pine skirting?
A close-up showing how the joint looks like interlocking 'fingers'- hence the name finger joint pine. There are a few really good reasons why finger joint pine is a superior material for skirting boards and architrave than solid pine planks.
How is finger joint manufactured?
A finger joint, also known as a comb joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then glued. The cross-section of the joint resembles the interlocking of fingers between two hands, hence the name "finger joint".
What is finger joint board made of?
Instead of continuous long wood boards glued together, finger jointed panels are composed of boards made of smaller strips of wood glued together lengthwise. In essence, it's made up of many shorter pieces of wood.
Is finger joint pine good?
The smooth surface finish gives it a flawless look once sanded and painted. MDF is also cheaper. Finger jointed pine is less expensive than solid wood, but has all the benefits and characteristics of 'real' timber.
How do you do finger joint molding?
0:233:08Better Than MDF? | Baird Finger-Jointed Moulding - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just take little short pieces of wood. And rejoin them together to create a beautiful piece ofMoreWe just take little short pieces of wood. And rejoin them together to create a beautiful piece of molding that you can put up in your house and paint.
What are the disadvantages of a finger joint?
Finger Joint ConsCan come out crooked.Harder to achieve a smooth wall.
Can you cut finger-jointed wood?
Box joints are an easy yet effective joinery method! Box joints, or sometimes referred to as finger joints, can be cut with a regular table saw blade or with a dado stack of your preferred width.
Is finger-jointed lumber cheaper?
Finger joint lumber is cheap because the manufacturers can use small lengths of leftover wood to assemble full length of moldings. That equates to cost savings sure, but what does it do to the performance?
Can finger-jointed pine be stained?
Staining Finger Joint Pine Being a natural material, finger joint pine can be stained instead of primed and painted if having an exposed wood grain appeals to you.
What is pine finger joint?
0:025:32What is Finger-Joint Pine??? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'll explain it to you real quick what it is if you look right here at that joint. That is aMoreAnd I'll explain it to you real quick what it is if you look right here at that joint. That is a finger joint notice how it looks like someone's fingers intertwined right next to their other fingers.
Can finger joint pine be used outside?
Finger Jointed Pine products are intended for dry interior use where a paint finish is specified. They should not be used externally.
How do you make a wooden box joint?
9:3714:42Easy Box Joint Jig | How To Make Box Joints - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo take one of those pieces you just cut you want it to be about an inch and a half to two inchesMoreSo take one of those pieces you just cut you want it to be about an inch and a half to two inches long. And you want to glue it firmly in place into the pre-cut slot on the front of your jig.
What is finger joint Poplar?
Finger-joint Poplar is an even better option than solid Poplar. The best parts of the wood — where knots, wane and other imperfections are cut away — are adhered together to create a bond that has a structural integrity greater than solid Poplar.
What are finger joints wood?
Finger-joints are used to join short pieces of wood together to form units of greater length. The joint is composed of several meshing wedges or “fingers” of wood in two adjacent pieces and is held together with glue. Finger-joined lumber is used for both structural and non-structural products.
Is finger-jointed lumber strong?
Both finger-jointed and sawn studs are strong enough for short-term bending or tension loads (from wind, earthquakes, and impact, for instance), but not for long-term exposure.
What is finger-jointed timber?
What does finger-jointed mean? A finger joint is a woodworking joint made by gluing shorter pieces of timber end-to-end that have several tapered “fingers” into long pieces – hence the name “finger-joint.”
What is a finger-jointed panel?
Finger-joint panels are single-layer panels made of best natural wood. Because the finished panels are strong and keep their shape well, they are ideal for high quality furniture and interior decoration such as staircases and window sills.
Finishing Finger Joint Pine
Finger joint pine is planed to a smooth finish and is perfect for priming and painting, as well as staining or varnishing if you want to take advantage of the natural wood grain and show it off as a feature in your home.
Staining Finger Joint Pine
Being a natural material, finger joint pine can be stained instead of primed and painted if having an exposed wood grain appeals to you. One thing to consider is how the tain may draw attention to the finger joints in the wood, and whether or not you see that as a positive or negative feature.
Technical Specifications of Finger Joint Pine Used by Skirting 4 U
If you are a builder or contractor and you need to know the technical specification of the pine used by Skirting 4 U to create skirting boards, architrave and other mouldings, the details are as follows:
How is Finger Joint Lumber Made?
Wood manufacturers take some left over lengths of wood that are too short to use anywhere else and cut the ends of them with a finger joint profile. It’s not complicated, you can make your own finger joint profile with a finger joint router bit if you wanted to.
Finger Joint Performance
This is just my opinion from working around the stuff for years. Sometimes I’ve installed it myself, but more often I’m the one removing it when it fails. It can work well, in larger pieces when there is ample gluing surface to help hold the pieces together, but it still has one fatal flaw.
Should You Use Finger Joints?
I certainly won’t yell at you if you do. NOOOOOOOOOOOOO!!!! Just kidding! Finger joint lumber should never be used for anything structural or exposed to the elements, but if you want to save a little to put some new casings in your closet then sure go ahead. Just be aware that you get what you pay for and it is much cheaper than solid wood.
MDF (Not Currently Sold at Frame It Easy)
Medium-Density Fiberboard (MDF) is the most heavily engineered of the three types. While it is technically wood — at least at its most base level — it is made by combining smaller pieces of sawdust together with wax or resin and then wrapping it in a decorative laminate.
Which Wood Frame Type Should You Pick?
All three varieties have their advantages and disadvantages, so it’s hard to say which is the best. Instead, you should ask yourself which is best for your priorities.