What is the best length for a reciprocating saw?
It is because it allows you to avoid making a plunge cut before removing large branches from trees. Longer blades make it easier for the reciprocating saw pruning blade to bend without breaking when cutting. The ideal length for a reciprocating saw pruning blade is 9-12 inches.
How do reciprocating saws work?
Reciprocating saws use a pressure sensitive trigger that lets you control how fast the blade moves in relation, which is often needed when first cutting, as you’ll start slowly and increase the blade’s speed as you cut.
Do reciprocating saw blades come with shanks?
Yes, Reciprocating saw blades come with a shank that is universal, and it is standardized to fit all reciprocating saws. How long are reciprocating saw blades? Most of the reciprocating saw blades are 6Inches in length, but you can also find smaller or bigger ones. How thick can a reciprocating saw cut?
Do you need a reciprocating saw to cut wood?
It is an essential tool to have because it cuts through anything, sometimes it is called “Demolition Saw” as it cuts through any material, hard and tough. However, with the ranges of things it can cut through, you can not do it without a blade. No matter how expensive the reciprocating saw is, there is no good blade, and it is useless.
Do all reciprocating saw blades fit?
Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.
What is the shortest blade for a reciprocating saw?
0:333:00How To Choose Reciprocating Saw Blades - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipA blade like this a little bit shorter as you can see will do the a really good trick. This is aMoreA blade like this a little bit shorter as you can see will do the a really good trick. This is a carbide tooth blade a little bit shorter in length.
Can you use a reciprocating saw to cut tree limbs?
You can cut branches and limbs with a reciprocating saw. If your tree is small enough, you can cut a tree down. Bear in mind, these saws are ideal for cutting stationary material. If there's a lot of give to your branch or limb, the saw may just shake it rather than cutting through it.
What is the longest metal cutting sawzall blade?
Morse Master Cobalt 9”Our best performing, longest lasting metal cutting sawzall blade is the Morse Master Cobalt 9” .
Can a reciprocating saw cut a bolt?
Reciprocating saws fitted with the correct metal cutting blade make easy work of sawing through bolts, rods, rebar, pipes, profiles, and nails in stud work.
Can a reciprocating saw cut concrete?
A reciprocating Sawzall is good for cutting concrete if you have the right blade, but it works best on thinner slabs or cinder block. It's all about the blade. Buy a blade as long as possible and with a diamond or carbide grit. Go slow at first until the cut gets started.
How thick of a branch can a reciprocating saw cut?
But in actual practice, you can cut trees up to 6 to 8-inches thick with a reciprocating saw. It is better to say that the object which needs to be cut should be smaller in diameter than the length of the blade itself.
What's the difference between a Sawzall and a reciprocating saw?
sawzall, and what the difference is between the two. They are actually the same thing. The Milwaukee tool company introduced the first reciprocating saw in 1951, and called it the Sawzall. It has since been so widely copied that the terms reciprocating saw and sawzall are now used interchangeably.
Can you cut a Christmas tree with a reciprocating saw?
The Hackzall will not only fell your small Christmas tree, but you'll find yourself using this one-hand reciprocating saw for all kinds of sawing jobs in and outside of the house. It's gotten rave reviews from plumbers and electricians we know.
What are the longest reciprocating saw blades?
Length. Reciprocating saw blade lengths range from 3" - 12". Standard lengths are 4”, 6”, 8”, 9” & 12”, with 6" and 9" being the most commonly sold. Short blades are more rigid and therefore more aggressive.
Can a Sawzall cut hardened steel?
Carbide tipped blades cut harder, denser metals like hardened steel, cast iron, alloys including boron steel, and higher grades of stainless steel. These blades are extremely hard, heat-resistant, and impact-resistant.
Can I use a Sawzall to cut sheet metal?
Best Reciprocating Saw Blades for Your Project. Reciprocating saws can churn through metal, masonry, wood, plaster, fiberglass, stucco, composite materials, drywall and more. The key to a successful cut is using the right type of blade for the material you are cutting.
Are there different sizes of reciprocating saw blades?
Length. Reciprocating saw blade lengths range from 3" - 12". Standard lengths are 4”, 6”, 8”, 9” & 12”, with 6" and 9" being the most commonly sold. Short blades are more rigid and therefore more aggressive.
What are the different types of reciprocating blades?
Carbon steel blades are generally the best reciprocating saw blades for trees. High-speed steel blades have durable teeth but are more prone to breakage and last up to five times longer than high-carbon steel.
What does HCS blade mean?
Generally, the fabrication of the steel will be identified as follows: HCS: Designed for cutting softer materials such as softwood, wood fibreboards and soft plastics. HSS: Hardened, high-grade, high-speed steel, perfect for cutting harder materials, like metal, aluminium and non-ferrous metals.
What is the best TPI for cutting wood?
TPI is the number of teeth the blade has per inch. If you're looking to cut wood or other soft materials, you'll need a blade with a TPI of 6 up to 20. For harder materials like metal, a TPI between 14 up to 36 is more suitable. The number of teeth can be found on the blade.
What is the standard length of a reciprocating saw blade?
Reciprocating saw blade lengths range from 3" - 12". Standard lengths are 4”, 6”, 8”, 9” & 12”, with 6" and 9" being the most commonly sold. Short blades are more rigid and therefore more aggressive. That rigidity give you a straighter, more square cut, making them ideal for plunge cutting, copper pipe, and thinner metals. Longer blades are more flexible and can dissipate more heat since they have more surface area. Jobs like demolition, pruning, auto-dismantling, and rescue call for a longer blade. This flexibility also allows you to bend the blade when a flush cut is required.
How many TPI for a reciprocating saw blade?
Reciprocating saw blades range from 3 - 24 TPI. The number of teeth per inch determines the cut speed and roughness of the cut.
What is a carbide sawzall blade?
Carbide-Tipped. Carbide tipped sawzall blades are also bi-metal blades, but with a carbide (tungsten carbide or titanium carbide) tip at the end of each tooth. These carbide materials are extremely hard, heat-resistant, and impact-resistant. They also offer 20 times the cutting life of a standard bi-metal blade.
What blades are used to cut concrete?
Diamond. Diamond blades are also abrasive, but use diamonds instead of carbide. These are the most expensive reciprocating saw blades. They are used to cut concrete, glass, fiberglass, and ceramic, and can also cut fiber cement, cast iron, and masonry. The hardness of diamonds and fineness of the abrasive grit is necessary to cut brittle material ...
What can a reciprocating saw cut?
With the right blade, your sawzall can cut through wood, nails, fiberglass, branches, plaster, masonry, and metals including aluminum, cast iron, steel, ...
What is the most inexpensive blade?
High Carbon Steel (HCS) Carbon steel blades are the most inexpensive type, and also the most common. They are the softest of the blade materials and tend to be more flexible to allow bending without breaking in the proper application. That also makes them the least durable. They are good for cutting softer wood, particle board, and plastics.
How long do high speed steel blades last?
They last up to 5 times longer than carbon steel. That hardness makes them less flexible and thus more prone to breaking when bent.
How long is a reciprocating saw blade?
Most of the reciprocating saw blades are 6Inches in length, but you can also find smaller or bigger ones.
Where are reciprocating saw blades made?
It is made in Switzerland. These reciprocating saw blades come in a pack of 5. If you need a reciprocating set of saw blades for metal cutting and other professional work related to that, I would highly suggest this product to you. Made with BI-metal, with a straight back, it is only applicable to metal.
What are wood saw blades made of?
Woodcutting blades made entirely with C-V steel Construction for making cuts effortless and quick, while metal saw blades are made of BI-material for cutting metal, again effortlessly. Compatible with all kinds of saw tools, this set has various kinds of blades from the thickest ones to thin metal ones.
What is reciprocating blade?
Reciprocating blades are the powerful yet perfect tool that you need for cutting. Whether it is a DIY project or just your everyday garage work, reciprocating blades make it all easier and less time-consuming. The big news is, you never have to worry about the material you are about to cut into anymore with these blades since ...
Is a saw blade useless?
For example, if you get a top-class saw blade with the sharpest blades ever, but if it doesn’t fit you saw tool, it’s useless, or if you buy a good blade but it’s too small to cut the stuff you are working on, it’s useless. So make sure you never compromise on the saw blades type or size!
Can you cut tree limbs with a reciprocating saw?
You can definitely cut tree limbs and branches with a reciprocating saw.
Should you avoid blades with cheap construction?
Since it’s what makes or breaks the product, you might want to avoid blades with cheap construction.
What determines the quality and speed of a reciprocating saw blade?
The pattern formed by the manner in which teeth are attached to the reciprocating saw blade determines the quality and speed of the cut.
How Long Is The Blade?
Besides thickness, you need to pay attention to the length of the blade you wish to buy.
How Thick Is The Blade?
Blade thickness is the most important determinant of how much the blade can bend.
What is the TPI on a reciprocating saw?
The number of teeth per inch (TPI) is the standard measure of the cutting speed of a reciprocating saw blade.
Why do you need a deep gullet blade?
For instance, a ripping scenario requires deep gullet in order to provide room for a large amount of chip removal. Small gullet blades are ideal for crosscutting.
What TPI is best for cutting metal?
Reciprocating saws with 3-8 TPI is suitable for smoother cuts while those with TPI of 14-18 are ideal for cutting metals.
What is the best blade?
The best blades are the bi-metal ones because they combine metals with the best quality.
Why use a reciprocating saw blade?
It is why you need the reciprocating saw pruning blade. It allows you to cut through thicker tree branches with very little effort, unlike any other pruning blades. There is another factor that makes a reciprocating saw pruning blade ideal. It should allow you to cut on both push and pull stroke.
How to remove blade from reciprocating saw?
If the reciprocating saw has a blade already, you can remove it by wiggling the blade back and forth and removing/pulling it from the socket. Attach the new reciprocating saw pruning blade by allowing the teeth of the blade to face the same direction with the handle.
What is a reciprocating saw?
Reciprocating saw uses various blades. Though different blades cut different materials, it does not mean they use different saws. It is changing the blade multiple times while doing some pruning and is a quick, easy task.
How many teeth per inch for a reciprocating saw?
It could be as low as three teeth per inch. It comes with an aggressive tooth geometry that allows you to go through wood quicker than any other blade. Also, it is very helpful when trimming shrubs. However, when working on nail-embedded wood, ensure that the reciprocating saw trim blade has a 5-7 TPI.
What are reciprocating saw blades made of?
Reciprocating saw blades made of different compositions. It could be high carbon steel or high-speed steel. There is also a Bi-metal blade, obtained by mixing two front blades.
What is a high carbon steel blade?
The high carbon steel is cost-effective and extremely flexible, allowing it to bend to various degrees without breaking. It’s used for softwood pruning but could get blunt when used on hardwood, which is where Bi-metal reciprocating saw pruning blade becomes useful.
What is a demolition saw?
You have a Reciprocating saw. It is an essential tool to have because it cuts through anything, sometimes it is called “Demolition Saw” as it cuts through any material, hard and tough. However, with the ranges of things it can cut through, you can not do it without a blade.
Parts Of A Reciprocating Saw
Reciprocating saws are made of various parts, each one of which can break or wear out. These include:
Dropping A Reciprocating Saw
What happens when you drop a reciprocating saw? How many times can one be dropped before it stops working?
Reciprocating Saw Handle
A reciprocating saw should not be used if the handle is broken. This could put the operator at risk of injury. The way to make sure is to inspect the handle prior to each use. If it feels shaky or loose or there is a noticeable crack running through it, then do not use the saw.
Reciprocating Saw Motor
A big decider on how long a reciprocating saw will last is the lifespan of the motor. This depends on several factors, one of which is the type of motor it is.
Is A Reciprocating Saw Waterproof?
Reciprocating saws are generally not water-proof, but they are usually water-resistant. This means they can handle some contact with water droplets and mist without becoming damaged.
Reciprocating Saw Lifespan
So, how long will a reciprocating saw last? This depends on how it is used and which part of the saw breaks or wears out first.
In Closing
All in all, reciprocating saws are made to be rugged and handle abuse. This means they are likely to last a good long time with continuous use.
Top 11 Reciprocating Saw Blades Reviews
Buyer’s Guide For Reciprocating Saw Blades
- Reciprocating saw blade lengths range from 3" - 12". Standard lengths are 4”, 6”, 8”, 9” & 12”, with 6" and 9" being the most commonly sold. Short blades are more rigid and therefore more aggressive. That rigidity give you a straighter, more square cut, making them ideal for plunge cutting, copper pipe, and thinner metals. Longer blades are more fl...
Frequently Asked Questions
Conclusion