What is the extended life paddle and hardware kit?
This Extended Life Paddle and Hardware kit helps increase paddle life on your Toro Power Clear or CCR Snowblower. Over time, as your snowblower paddles contact asphalt or concrete they will wear down and need replacing.
Are poly rotor paddles better than rubber paddle?
Cost-wise, rubber paddles appear to be the “smart choice”, but after less than a full season of use, you’re back at the parts store ordering another set. Furthermore, KAGE Poly Rotor Paddles can last up to 4 times longer than OEM rubber paddles saving you money in the long run.
When should I replace my snowblower paddles?
Over time, as your snowblower paddles contact asphalt or concrete they will wear down and need replacing. This kit helsp reduce the number of paddle changes needed during the life of your snowblower.
When should Toro paddles be replaced?
0:456:50How to Replace the Paddle and Scraper on a Toro Single Stage ...YouTubeStart of suggested clipEnd of suggested clipIt has a little indicator hole on the side of the paddle.MoreIt has a little indicator hole on the side of the paddle.
How often should you replace snowblower paddles?
about three to five yearsWhile amount and type of use will make results vary significantly, rubber paddles should last about three to five years for a 20'x50' driveway with sidewalks.
How do I know if my snowblower paddle is bad?
Your snow blower paddles have wear indicator holes on them, making it easy to keep track of their wear. Look at the wear indicator holes, and when the rubber paddles are worn to the holes it is time to replace the paddles.
How much are paddles for a Toro snowblower?
Compare with similar itemsThis item Toro CCR Snowblower Paddles 99-9313, Scraper 55-8760 with Belt 95-6151 KitStens Scraper Bar, Toro 108-4884, ea, 1, 780-832 , BlackAdd to CartAdd to CartCustomer Rating4.6 out of 5 stars (356)4.6 out of 5 stars (86)Price$6900$1660Sold ByMower ShopAmazon.com1 more row
How long should a snow blower last?
Snow blowers can last several years, even decades, if they're maintained regularly and correctly. Snow blower maintenance varies based on the type of snow blower you have, either a two stage snow blower or a single stage snow blower.
How do you change a paddle on a Toro snowblower?
How to Replace the Paddles and Scraper on a Toro Single Stage SnowblowerRemove the center hex bolts. ... Remove the special fasteners on the sides of the impeller paddles. ... Remove the metal spacers from the center paddle holes. ... Install the spacers on the new paddles. ... Install the new paddles on the center plate.More items...
Why does my Toro snowblower not throw snow?
If the blades get worn they will not effectively throw the snow. Visually inspect the blades for excessive wear and replace if needed. Inspect the belt to see if it is broken, stretched out, or out of place. If the cogged belt is broken or stretched out, replace it.
Why does my snowblower not throw snow very far?
A clogged chute won't throw snow very far. If the chute isn't clogged, check the augers and auger drive system. A damaged auger blade can't push snow through the shoot, and broken shear pins keep sections of the auger from spinning.
What can I spray on my snowblower to keep the snow from sticking?
BEST OVERALL: DuPont Teflon Non-Stick Dry-Film Lubricant.RUNNER-UP: Liquid Wrench M914 Silicone Spray – 11 oz.BEST BANG FOR THE BUCK: DuPont Teflon Snow and Ice Repellant.BEST HEAVY DUTY: CRC Heavy Duty Silicone Lubricant, 11 Wt Oz.ALSO CONSIDER: WD-40 Specialist Water Resistant Silicone Lubricant.
What are snow blower paddles made of?
Rubber Paddles are what come stock on a single-stage snow blower. They are a flexible, tire-like, material and are available in both OEM and aftermarket varieties.
Can you replace the blades on a snowblower?
Over time, your snowblower paddles will wear down, losing constant contact with the surface. This doesn't mean it's time to get a new snowblower. All you need to do is get a new set of paddles. Replacing the paddles is extremely easy... as long as you buy the right replacement parts.
How do you put a scraper bar on a Toro snowblower?
0:060:55Toro Snowblower Scraper Blade Replacement #117-7717 - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext remove the mounting screws securing the scraper bar. And slide the old bar. Off install the newMoreNext remove the mounting screws securing the scraper bar. And slide the old bar. Off install the new scraper bar by sliding it into position on the auger housing.
Product Overview
This Extended Life Paddle and Hardware kit helps increase paddle life on your Toro Power Clear or CCR Snowblower. Over time, as your snowblower paddles contact asphalt or concrete they will wear down and need replacing. This kit helsp reduce the number of paddle changes needed during the life of your snowblower.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
What is a kage rotor paddle?
KAGE brand Poly Rotor Paddles are the leading OEM replacement paddles for your snow blower. Sometimes convention steers us in a direction that seems more logical, but ultimately leaves us paying a greater price. Take for instance OEM rubber replacement paddles for your snowblower. Cost-wise, rubber paddles appear to be the “smart choice”, but after less than a full season of use, you’re back at the parts store ordering another set. Furthermore, KAGE Poly Rotor Paddles can last up to 4 times longer than OEM rubber paddles saving you money in the long run.
Is Toro a trademark?
TORO® is a registered trademark of The Toro Company. There is no affiliation between KAGE Innovation and The Toro Company.
Does polyurethane last longer than rubber?
No modifications necessary. Rotor Edge. Not only does the polyurethane last 4 times longer than rubber, it keeps it’s edge as it wears, cutting down to the pavement and cleaning more efficiently. KAGE Poly rotors are available for the following models of single stage snow blowers.