What is Behr cement stain used for?
Behr concrete stain is used to add color to concrete patios, walkways, driveways, interior concrete floors and garage floors. This page will describe how to use Behr cement stain and provide a form at the bottom of the page for people who have used Behr stain to submit reviews.
How long does it take for Behr stain to dry?
Park vehicle tires on corrugated cardboard for 7 days after applying stain. After 30 days, clean as needed with a mild, non-abrasive liquid detergent. For added protection, use Behr wet-look sealer for a high-gloss finish or Behr low-lustre sealer for a low-gloss finish. Allow stain at least 4 hours to dry before topcoating.
How do you clean Behr solid color concrete stain?
Clean up with soap and water, properly dispose of all stained rags and protect any unused stain from freezing. Behr solid color concrete stain is a durable, water repellent, solid color stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces.
How long does it take for Behr concrete to cure?
New concrete must cure for at least 30 days 2. Remove any coatings or sealers on the concrete using Behr's concrete stripper 3. For proper adhesion of the topcoat use Behr's concrete cleaner/etcher to clean and etch the surface 4.
How durable is Behr concrete stain?
Avg. Rating: A durable solid color stain designed to help protect and enhance both exterior and interior, vertical and horizontal concrete surfaces. This Siliconized 100% Acrylic formula is designed to provide a long-lasting durable finish.
How long does stain on concrete last?
Although concrete stain is permanent and won't flake off like paint, it penetrates only the top layer of the concrete surface and will eventually wear away as the surface is worn by traffic or weather exposure.
Does concrete stain last longer than paint?
Staining a Concrete Patio One of the greatest pros of choosing staining over painting is that the stain penetrates into the concrete rather than just building up on the surface, as with paint. This results in a longer-lasting color that won't fade as quickly as paint.
Does Behr solid concrete stain peel?
By not chemically bonding to the concrete surface, behr concrete stain and any other concrete coating may peel off if the concrete surface isn't prepared properly or if there is moisture in the concrete or the sub-grade, moving up through the concrete and evaporating out through the surface.
What is better concrete dye or stain?
Unlike stains, they can be mechanically polished. Dyes are vegetable-based and impart color by penetrating deeper into the concrete, since they are smaller in particle size than stains. Because of this, dyes provide greater color saturation to concrete floors.
Does concrete stain need to be sealed?
To prolong stain life, stain manufacturers recommend keeping stained surfaces protected with multiple coats of clear sealer (outdoors) and a floor wax (indoors). A good sealer will provide other benefits as well, such as adding sheen to the surface and enhancing color intensity.
Does Behr concrete stain need to be sealed?
1:563:26How-To: Apply Behr Premium Semi-Transparent Concrete Stain ...YouTubeStart of suggested clipEnd of suggested clipBe sure the surface is fully cured before use allow 24 hours for light foot traffic. Allow 72 hoursMoreBe sure the surface is fully cured before use allow 24 hours for light foot traffic. Allow 72 hours for heavy foot traffic and furniture.
Which concrete stain is best?
6 Best Concrete StainsKemiko Stone Tone Concrete Stain.Semi Transparent Professional Grade Cement Stain.Acid Stain DIY Kit Acrylic Solvent Sealers.TuffCrete Waterborne Acrylic Concrete Stain Paint.Rust-Oleum Concrete Stain Spray.
How long does water based concrete stain last?
Depending on the concrete sealer used, it's usually recommended to seal the concrete every couple of years to keep the color from fading. If you choose a high-quality concrete stain and sealer, you may be able to shorten the period between resealing to every 3-5 years.
Should I paint or stain my concrete driveway?
Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.
How do you remove Behr stain from concrete?
Remove loose or peeling stain with a wire brush and coarse sandpaper. Sweep or vacuum up the debris and discard. ... Use a rag mop or broom to spread on an even layer of Behr Concrete and Masonry Stripper No. 992. ... Scrub the area thoroughly with Behr Concrete Cleaner and Degreaser No. 990 using a clean broom or scrub brush.
Does concrete stain chip?
Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.
Does stained concrete hold up?
Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .
How do you protect and maintain stained concrete?
HOW TO CLEAN STAINED CONCRETE FLOORSDry dust mop or damp mop regularly to keep away dirt and grime, cutting down on abrasion.Damp mop with a pH-neutral cleaner and water for an occasional deeper cleaning.Protect with a good film-forming sealer and a coat of wax or floor finish.
Is it expensive to stain concrete?
Staining concrete typically costs $7 to $15 per square foot. Contractors charge between $2 and $4 per square foot for a simple stain job and between $12 and $25 per square foot for high-end designs.
How long after staining concrete can you seal it?
After final wash down, allow surface to dry 72 hours before application of sealers. If newly installed (concrete-tile) requires grouting, it is recommended to pre-seal the tile before grouting to ease grout clean up.
How long does acid stain stay on concrete?
The stain may not reveal its true color until it has been allowed to remain on the concrete for several hours or longer.
What is the most important consideration when deciding on a concrete stain?
The most important consideration is the condition of the surface. If the concrete is covered by grime, glues, coatings, curing membranes, or sealers that inhibit the stain from soaking in, the stain won't be able to penetrate and achieve full color development.
What does concrete stain do?
Concrete stain does more than simply add color. Rather than produce a solid, opaque effect like paint or colored coatings, stains permeate the concrete to infuse it with rich, deep, translucent tones. Some stain manufacturers use adjectives such as "antiqued," "variegated," or "mottled" to describe the distinctive look.
Why is concrete color so durable?
Because stains penetrate into the concrete surface, their color is durable and long-lasting. When applied to properly prepared concrete, the color will not fade, chip, or peel away.
What is non reactive water based stain?
Non-reactive water-based stains (typically a blend of acrylic polymers and pigments) fill the pores of the concrete surface to produce a colored film or coating, ranging from translucent to opaque depending on the product. The key difference is that no chemical reaction takes place, so the color is more consistent.
What is acid based concrete?
Acid-based concrete stains are made up of inorganic metallic salts dissolved in an acid and water solution. They penetrate into the surface and react chemically with the concrete to form a permanent bond. The color they impart is translucent rather than opaque, resulting in deep, rich tones and attractive marbling effects.
How many colors of stain can you mix?
Although the basic color palette is sparse, you can mix two or more stain colors before application to achieve a different shade or apply one color over another.
What is semi gloss sheen?
A semi-gloss enamel sheen is sleek and radiant with a hard, durable finish. It is formulated to withstand wear, and will also resist moisture, fading and stains.
What is satin enamel sheen?
A satin enamel sheen has a pearl-like finish that's easy to clean.
What is the difference between matte and satin sheen?
A matte sheen has a low-luster, reflective finish that is durable , easy to clean, touches up well and also hides minor surface imperfections. An eggshell enamel sheen has a soft, velvety appearance that resists dirt and grime, as well as mildew. A satin enamel sheen has a pearl-like finish that's easy to clean.
What is flat sheen?
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
How long does Behr warranty last?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How long is Behr Process Corporation warranty?
WARRANTY. For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
What is the difference between matte sheen and flat sheen?
Get the look you want and the protection you need for any room in your home. A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections. A matte sheen has a low-luster, reflective finish that is durable, easy to clean, touches up well and also hides minor surface imperfections.
How long does it take for a stain to dry?
Allow stain at least 24 hours to dry before top coating with a clear.
How long does concrete need to cure?
New concrete must cure for a minimum of 30 days. Use a paint stripper to remove any previous coatings or sealers. Clean and etch surface using a product such as a muriatic acid etcher (read and follow all manufacturer's label directions) to achieve a textured profile similar to 150 grit sandpaper.
Is horizontal surface wear premature?
Horizontal surfaces may be subject to premature wear. Periodic touch-ups may be necessary.
Is BEHR semi transparent concrete stain acid free?
Get the protective qualities of a durable, weather-resistant stain without sacrificing the style of dye when you choose BEHR PREMIUM ® Semi-Transparent Decorative Concrete Stain. This acid-free formula is great on horizontal surfaces, and our selection of 18 custom colors lets you bring the look of natural stone to your home. It can also be layered to create unique color blends.
Can Concrete Be Poured In The Winter? What Temp. is too Cold?
Is it safe to pour concrete in the winter? Concrete can be poured in the winter if the proper precautions are taken. Use blankets to protect from freezing.
Will Vinegar Remove Concrete Sealer (This is Better)
Can you use vinegar to remove concrete sealer? Most concrete sealers are somewhat resistant to the acetic acid found in vinegar. Chemical stripper works better.
Concrete Courses - Education & Training - Learn Concrete Skills
I have concrete courses that teach you how to form, pour, power trowel finish a concrete slab, how to stamp concrete, epoxy coatings, repair foundation cracks.
10 Ways To Cover Concrete Walls In A Basement - Finish Basement Walls
See examples of how to cover your concrete walls that will give you ideas of how to finish your basement. From drywall, cement board, tile, faux brick and more