Full Answer
How long do wet look sealers last?
How Long Do Wet Look Sealers Last? Wet look sealers can last anywhere from 2 months to up to 5 years depending on several factors including: The type of surface the wet look sealer was applied to. The amount of subsurface moisture present.
Is Behr wet look sealer good for concrete?
BEHR PREMIUM WET-LOOK SEALER is also an excellent topcoat for paints and stains. Applied to a stamped concrete walkway. – Wet look? The Behr wet look sealer barely changed the appearance of the stamped concrete surface even after two coats.
What is wet look sealer made of?
BEHR PREMIUM® WET-LOOK SEALER is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a high gloss, wet-look finish.
What is the warranty period for Behr products?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How long does wet look sealer last?
The Armor AR350 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer. Typically, exterior substrates are sealed every 1-3 years and interior substrates are sealed every 3-7 years.
How long does Wet Look Concrete Sealer last?
5-10 yearsWater repellent and waterproofing silane and siliconate based products can last anywhere from 5-10 years. The longevity will depend on UV exposure, deicing salt exposure and vehicle traffic among other factors.
Is Behr wet look sealer waterproof?
0:072:53How-To: Apply Behr Premium Wet-Look Sealer - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt can be used on previously coated or uncoated vertical or horizontal surfaces. Such as paversMoreIt can be used on previously coated or uncoated vertical or horizontal surfaces. Such as pavers concrete Mexican tile and unglazed tile brick aggregate natural and artificial stone masonry.
How long does wet look patio sealer last?
Generally speaking, your wet look sealer could last as long as five years. However, there are some circumstances whereby you are advised to re-apply the sealer every couple of months. This is because of the many different factors that play a role.
How often should concrete be sealed?
every one to three yearsAccording to concrete trade organizations such as Concrete Network, plan on resealing every one to three years.
Does power washing remove concrete sealer?
1. does power washing remove concrete sealer (yes) Power washing with a surface cleaner attachment is a good way to remove old, white concrete sealer. Pressure washing works really good for removing water based concrete sealers like in the picture above.
How long does Behr wet Look sealer take to dry?
Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days. Clean with a mild, non-abrasive liquid detergent after 30 days.
Is Behr wet Look sealer acrylic?
BEHR Premium Wet-Look Sealer is a clear, non-yellowing, high solids, acrylic-based masonry sealer. It is formulated to seal, protect and beautify concrete and masonry surfaces with a high gloss finish. It is also an excellent topcoat for paints and stains.
Does wet Look sealer make it slippery?
People often wonder if wet look sealers make pavers slippery. These sealants only look wet and glossy but they are not slippery, especially when applied properly. It's advisable to hire professionals to apply this kind of sealant because they have the skills and experience to do so correctly.
How often should you seal a patio?
between 3 to 5 yearsThe general rule of thumb is that paver sealers last between 3 to 5 years, depending on how often you clean the patio, as well as other factors, such as sun exposure, rain and foot traffic. However, you need to bear in mind that, once you've completed sealing the patio, it cannot be removed.
What is the best concrete sealer wet look?
The two best products for a wet look are the Armor AR350 and the Armor AR500. Both types of acrylic sealers are made from high quality U.S. resins and are designed to enhance and protect the surface of the concrete.
How long does sealer last on pavers?
3-5 yearsHow often does sealer does need to be re-applied to a concrete paver driveway AND is it necessary to remove the “old” sealer before re-applying. Sealant needs to be reapplied every 3-5 years, depending upon conditions.
How long does tinted concrete sealer last?
Epoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic. Reactive penetrating sealers are the longest lasting concrete sealers, wearing away only if the substrate surface itself wears away.
How long does Coloured concrete sealer last?
Reactive chemical sealers last the longest at around 10 years or longer depending on what the surface is exposed to. An epoxy or urethane system generally lasts 5 to 10 years, and acrylic-resin sealers will last around 1 to 3 years.
How long does a water based concrete stain last?
Depending on the concrete sealer used, it's usually recommended to seal the concrete every couple of years to keep the color from fading. If you choose a high-quality concrete stain and sealer, you may be able to shorten the period between resealing to every 3-5 years.
How many coats of sealer can you put on concrete?
twoConcrete sealers are best applied in two thin coats. The first coat of sealer acts like a primer. Most of it will disappear into the concrete surface, and the concrete will probably look fairly unattractive after the first coat.
What is BEHR wet look sealer?
Beautify, protect and preserve the natural beauty of all your home's concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Wet-Look Sealer. This high-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.
How long does Behr warranty last?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey. To obtain warranty service, call 1-800-854-0133. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
How long is Behr Process Corporation warranty?
WARRANTY. For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications.
How long does it take for corrugated cardboard to dry?
Allow to dry 24 hours for light foot traffic. 72 hours to reposition furniture/heavy foot traffic and park tires on corrugated cardboard for 14 days.
How long does concrete cure?
New concrete must cure for a minimum of 30 days. For new or smooth concrete, use a concrete & masonry cleaner & etcher product. Clean previously created surfaces in sound condition with a concrete & masonry degreaser & cleaner product.
How to apply thin coat of paint?
Apply a thin coat using a nylon/polyester brush, 1/4” - 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq. ft. (19-42 m 2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll for uniform thickness.
What is BEHR wet look sealer?
Beautify, protect and preserve the natural beauty of all your home's concrete & masonry surfaces with BEHR PREMIUM Concrete, Brick & Tile Wet-Look Sealer. This high-gloss formula can also be used on pavers, artificial stone and stucco, and it also makes a great topcoat over paints and stains.
How long is Behr Process Corporation warranty?
For one year from the date of purchase, Behr Process Corporation warrants to the original consumer purchaser, (1) that the product meets Behr Process Corporation’s manufacturing specifications, and (2) the performance of this product when applied according to the label instructions and specifications. If this product is found not to perform as specified on the label within one year from the date of purchase, Behr Process Corporation will, at its option and upon presentation of proof-of-purchase (the original receipt), either furnish an equivalent amount of new product or refund the original purchase price of this product to you. The clause of limitation of liability which follows is inapplicable in Québec. This warranty excludes (1) labour and costs of labour for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. To the extent permitted by applicable law, any implied warranties including the implied warranties of merchantability and of fitness for a particular purpose, are limited to the duration of this express warranty. The above provisions are not intended to operate where prohibited by law. This limited warranty is the only warranty provided by Behr Process Corporation unless extended by a provincial consumer statute. To obtain warranty service, call 1-800-854-0133 ext. 2, or contact Behr Process Corporation at 2750 Centre Avenue N.E., Calgary, AB T2A2L3. Behr Process Corporation reserves the right to inspect any and all application of the product prior to processing your claim made under this warranty.
What is a hi gloss sheen?
Hi-Gloss enamel sheens provide have a brilliant, shiny appearance and a durable, glass-like finish that allows dirt and grime to be wiped clean.
What to use to strip concrete before sealing?
Scrape and remove loose and peeling coating. To strip the surface, use a product such as BEHR PREMIUM ® Concrete & Masonry Paint Stripper. Follow label instructions. Application.
How to contact Behr coatings?
To consult with a Behr Certified Coatings Professional, call 1-800-661-1591.
What is flat sheen?
A flat sheen has a non-reflective finish that touches up well and hides minor surface imperfections.
How to apply thin coat of paint?
Apply a thin coat using a nylon/polyester brush, 10-13 mm nap roller, high quality pad applicator, or a high quality pump sprayer with an adjustable tip at a spread rate of 18-42 m 2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll for uniform thickness.