Full Answer
How much does it cost to replace a door lock actuator?
The labor associated with door lock actuator replacement isn’t much, as it only comes in at around $100. But the parts that are necessary to replace a door lock actuator can cost over $200 in some cases. It’s what makes door lock actuator replacement on the costly side.
What happens when a door lock actuator goes bad?
If a door lock actuator ever goes bad, it could make it difficult, if not impossible, to lock and unlock a car door. It’s why it’s going to be so important for you to pay the door lock actuator replacement cost in the event that one of your door lock actuators goes bad. How Does a Door Lock Actuator Work?
What's the 2004 Subaru Legacy door lock actuator replacement cost?
For a 2004 Subaru Legacy, the labor time for a door lock actuator replacement is around 0.8 of an hour for either the front or rear doors. A factory part costs about $100 for any door, and a Standard part costs about $71. The total door actuator replacement cost would be about $180 using OE parts, or about $151 using aftermarket parts.
How long does it take to replace a blend door actuator?
Exactly how long it takes to replace a blend door actuator will depend on several factors, including the actuator’s location. Some blend door actuators are easy to access, while others are buried behind many other components underneath the dashboard.
How long does it take to change door actuator?
It takes about 1.5 hours to replace a power door actuator on most vehicles.
How long does it take to replace car door lock actuator?
Depending on the vehicle and if the door can open from the inside. The labor is roughly about 1.5 hours. It may be more on some vehicles and models.
How much does it cost to replace an actuator in a car door?
The average car actuator replacement cost is $300, depending, of course, upon your car's make and model. In most cases, a mechanic will remove the malfunctioning actuator and replace it with a functioning one.
How hard is it to replace a door lock actuator?
The Removal and Replacement of the Actuators After removal of the door panel the rest is pretty easy. After removal of the door panel the steps are less stressful, unhook the door lock rod from the door lock (make sure not to loose the clip) the final step is to unbolt and unclip the motor from the door body.
What causes door lock actuator failure?
(If there is no voltage, the problem is separate and electrical). There are several factors that can cause a door lock actuator to fail. One is corrosion. Over time, moisture, oil, dust, and debris can enter the actuator or the mechanical links.
How do I know which door actuator is bad?
Usually a bad or failing power door lock actuator will produce a few symptoms that can notify the driver of an issue that should be serviced.Unusual noises coming from inside the door. ... Power door locks behave erratically. ... Power door locks do not function.
Does the actuator control AC?
It is the job of the AC actuator to control the opening and closing of the airflow in response to the thermostat, thus controlling air movement and allowing cool air to blow down the ducts and into the house.
How do you fix a car door actuator?
Step 1: Position the vehicle. ... Step 2: Secure the vehicle. ... Step 3: Install a nine-volt battery saver. ... Step 4: Remove the door lock actuator bolts and the lock screws. ... Step 5: Disconnect the door lock actuator. ... Step 3: Take apart the motor. ... Step 2: Clean and reconnect the actuator. ... Step 4: Reattach the clips and cables.More items...•
How much does it cost to fix the AC actuator in a car?
The Average Cost to Replace a Blend Door Actuator Is $309-$355, Depending on if You Go to the Mechanic or DIY. This price range is based on national averages for all vehicles and does not factor in taxes, fees, or your particular make and model.
How many door lock actuators does a car have?
Each door has its own power lock actuator, and the motor turns in one direction to lock the doors and the other to unlock them.
Where is door lock actuator located?
Locate the lock actuator. It is bolted to the inside of the door frame by the door latch. Remove the electrical plug that supplies power to the actuator. It should come out by hand.
Why is my car door not locking and unlocking?
A malfunctioning logic board or a break in the wire could cause problems. If the lock and unlock function works intermittently, there could be an electrical short in the system due to the plastic insulation of the wire being worn down. If it has ceased to function at all, the wire could be broken.
How long does a door lock actuator last?
“How Long Do Door Actuators Last?” Actuators are a piece of technology that goes bad over time, that's why it is hard to predict when your door lock actuator goes bad. An actuator should last about 100,000 miles, considering that the car is kept in really good condition.
How much does it cost to fix a locking mechanism on a car door?
Car door lock repair is a relatively quick and painless process, and the prices aren't that egregious either. An assessment and repair of your car door lock can cost anywhere from $50 to $300, depending on the extent of the damage and the amount of labour it will require.
Should I replace door lock actuator?
The door lock actuator can go bad over time because it is used on a regular basis. The motor can fail, or different parts in the motor can go bad. As soon as you notice something is not right with the locks, contact a professional mechanic to have your door lock actuator replaced.
How long should an actuator last?
In the majority of cases the throttle kicker actuator will last the lifetime of your vehicle without any service or maintenance needed on your part. However, when it does fail it is usually very sudden and completely unexpected.
How much does it cost to replace a blend door actuator?
If you choose to have a professional replace your car’s blend door actuator, you can usually expect to pay somewhere between $200 and $500 to get the job done. Of course, the exact cost will depend on various factors, such as the year, make, and model of your vehicle.
Where is the blend door actuator located?
The blend door actuator (s) are typically located on the climate control case behind the dashboard. Consult a repair manual or repair database for the exact location of your vehicle’s blend door actuator (s).
Why is my blend door hotter than the desired setting?
A faulty actuator can cause the blend door to be stuck in one position or another , resulting in an outlet temperature that’s hotter or colder than the desired setting.
What is a blend door?
Finally, the blend door, which is sometimes referred to as a temperature or mixture door, manages the air temperature by regulating airflow through the Heater core.
Can a blend door actuator stop a vehicle from running?
Although a faulty blend door actuator can prevent your climate control system from working properly, the problem will not stop your vehicle from running well. If you can stand the discomfort of the climate control not working correctly, there’s no reason why you can’t continue driving with a faulty blend door actuator.
Can a blend door actuator fail?
A blend door actuator can fail electrically (for example, a faulty motor) or mechanically (for example, broken gears). The video below demonstrates why blend door actuators fail on certain Ford models:
Can you replace a blend door actuator yourself?
You can save money by replacing the blend door actuator yourself if you have the tools and the know-how. CarParts.com has a wide variety of replacement blend door actuators available for various makes and models.
How to tell if door actuator needs replaced?
The most obvious sign that a door lock actuator needs to be replaced is that it simply doesn’t work, that it fails to lock or unlock the door. Wiring and fuse issues should be ruled out. If the only way to activate the door locks electrically is with a key fob, then, it should be verified that the fob battery is good.
How much does it cost to replace a door lock actuator?
To replace a rear door lock actuator, the total cost would be about $196 using O E parts, or about $148 using aftermarket parts.
Why does my door lock sound so weak?
A common symptom is to hear a weak door lock motor trying to work but fail to fully lock or unlock the door. Another common symptom is to hear the plastic gears grind noisily when trying and failing to unlock the door. Either of those can be the result of the plastic housing warping or becoming distorted with age, which can cause binding or misalignment.
How much does it cost to replace a door lock actuator on a 2012 Dodge Ram 1500?
For a 2012 Dodge Ram 1500 pickup, the labor time to replace a door lock actuator is estimated at 0.9 of an hour for a front door and 0.6 of an hour for a rear door. A factory door lock actuator costs about $136, and a Standard actuator costs about $88.
How much does it cost to replace a 2006 Volkswagen Golf door lock actuator?
For a 2006 Volkswagen Golf, the labor time to replace a door lock actuator is estimated at 1.8 hours for either the front or rear doors. An SKP actuator costs about $45, for a total of about $225 to complete the job.
How much does it cost to replace a door actuator on a 2004 Subaru Legacy?
For a 2004 Subaru Legacy, the labor time for a door lock actuator replacement is around 0.8 of an hour for either the front or rear doors. A factory part costs about $100 for any door, and a Standard part costs about $71. The total door actuator replacement cost would be about $180 using OE parts, or about $151 using aftermarket parts.
What is a door lock actuator?
A door lock actuator is a complicated assembly with several parts. It is fundamentally a component of the latch mechanism assembly of the door, which has a hook that grabs and holds the catch in the door jamb when the door is closed.
How much does it cost to replace a door lock actuator?
But the parts that are necessary to replace a door lock actuator can cost over $200 in some cases. It’s what makes door lock actuator replacement on the costly side.
Where Can You Have Door Lock Actuator Replacement Done?
If you know that you have a bad door lock actuator in your car and you want to get it fixed, it should be easy tracking down someone to help you with it. Just about any ASE-certified mechanic should be able to pop your old door lock actuator out and put a new one into its place in no time. It’s a relatively straightforward job that should only take about an hour or so to complete.
How Does a Door Lock Actuator Work?
You’ll gain a new appreciation for your car’s ability to lock and unlock your doors electronically when you know what a door lock actuator has to go through to complete this relatively simple task. Here is how the process plays out in matter of just a second or two:
What Are the Symptoms of a Bad Door Lock Actuator?
You’ll find that a door in your car won’t lock and unlock like normal when you have a bad door lock actuator on your hands. But there are also some other signs that might suggest your door lock actuator is on its last legs when it’s about to go bad. Keep an eye out for these signs, which include:
What happens if a door lock actuator goes bad?
If a door lock actuator ever goes bad, it could make it difficult, if not impossible, to lock and unlock a car door. It’s why it’s going to be so important for you to pay the door lock actuator replacement cost in the event that one of your door lock actuators goes bad.
How many times do you lock and unlock your car door?
Depending on how much time you spend driving your car around, you might do it more than a dozen times each day. And that can really take a toll on your door lock actuators over time. When you’re constantly locking and unlocking your car doors, it’s eventually going to wear your door lock actuators out and put you in a position where you need to replace them.
Can a bad door actuator cause safety issues?
As long as you do these things, a bad door lock actuator shouldn’t be able to cause any other issues for you safety-wise. But you will start to find that manually locking and unlocking the doors all the time is going to get annoying fast, so you should still plan to pay to have door lock actuator replacement done.
How long do door actuators last?
It can be difficult to predict exactly how long a door lock actuator is going to last. It could last for a good many years, well beyond the 100,000-mile mark. But in certain cases, you might find your car still under warranty when you already have to take it in for a replacement.
How much does it cost to replace the door lock actuator?
Replacement of a door lock actuator with the help of a dealership may cost $80-$180 only for labor. Then add between $120 – $270 for some OEM parts. Aftermarket parts are cheaper at $50-$120) but unfortunately, they are not available for all vehicles.
How easy is it to replace a door lock actuator as a DIY project?
But first, you might want to know how difficult the job can be. On average the difficulty can be from 6 to 8 on a scale of 1 to 10, with 10 being most difficult.
How to test door lock actuator?
Each time you operate the lock in different directions you must see 12 V across the electrical connector and in one direction you will have to see a positive and in the other direction you will see a negative. If this simple test yields these results then you can confirm a defective actuator motor or solenoid. But if you have no power it could be a power switch issue.
Why does my door lock alarm go off randomly?
There are also times, like mentioned above when a water leak penetrates inside the door lock actuator connector causing the anti-theft alarm to go off randomly. In some cases, a physical failure of the actuator makes it impossible for the door to be opened from the inside of the car.
How to check if car door actuator is working?
To check if the car door’s actuator is failing, try to use the keypad or remote device to unlock the car door. Another option is to try pressing the unlock button found in the door panel cluster . Check the car door if it will remain locked, and if it is then there’s an issue with the actuator.
Why does my door lock actuator fail?
Internal circuits of door lock actuators also have a tendency to fail from their normal operation. It can happen when the bracket on the actuator for the interior release cable breaks and prevents the door to be opened from the interior.
