Full Answer
How long does decorative concrete sealer last?
They have the shortest longevity; since they sit on the surface of the concrete and do not penetrate into the concrete they are at high risk of UV degradation and wear. Decorative concrete sealers are available as solvent or water based products and can last anywhere from 6 months to 3 years.
Does Valspar solid color concrete stain seal?
Valspar Solid Color Concrete Stain Review The Solid Color Concrete Stain manufactured by Valspar is marketed as a concrete staining product that will also seal your concrete, offering an increased level of protection. However, this is not entirely true.
How long do wet look sealers last?
How Long Do Wet Look Sealers Last? Wet look sealers can last anywhere from 2 months to up to 5 years depending on several factors including: The type of surface the wet look sealer was applied to. The amount of subsurface moisture present.
How long do you soak Valspar sealer in water?
Allow to soak for 10–15 minutes — or until pores are completely sealed. Wipe off excess from the surface before the sealer dries. Clean up with warm, soapy water. Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar protective sealer wet look.
How long does sealer last on concrete?
Epoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic. Reactive penetrating sealers are the longest lasting concrete sealers, wearing away only if the substrate surface itself wears away.
How long does stamped concrete sealer last?
The stamped concrete will retain its natural appearance without any gloss or sheen but the penetrating concrete sealer will protect from spalling, cracking and mold for up to ten years before needing to be resealed.
Is Valspar concrete sealer waterproof?
Valspar Wet Look High Gloss Sealer waterproofs and enhances the color and design of aggregate, masonry, brick, slate and pavers with a glossy, wet-look sheen. As durable as it is beautiful, it protects against the sun's powerful rays, damaging weather, water, gasoline and de-icing salts.
How long does concrete cure and seal last?
Concrete cure and seals are affected by the environment and traffic, and generally will begin to show wear patterns after a year or two, and will completely wear away in 3 to 4 years.
How long does concrete Colour seal last?
Keep it clean and make sure to reseal the concrete every two years. This will prevent any stains and keep the surface looking fresh and attractive all year round.
How often should you apply concrete sealer?
By sealing your concrete every 2-5 years, as recommended by experts, you should keep your floor in good shape, preventing cracks, pitting, and additional damage.
Is Valspar protective sealer good?
Valspar® Protective Sealer Natural Look 1.9 out of 5 stars. Read reviews for average rating value is 1.9 of 5. Read 30 Reviews Same page link. Valspar® Natural Look Protective Sealer locks out weather and scuffs with a tough, penetrating layer of invisible protection.
How do you remove Valspar concrete sealer?
1:169:17How To Remove Concrete Sealer (Strip And Re-Seal Old White ...YouTubeStart of suggested clipEnd of suggested clipSo if you've got a water-based sealer on there probably the easiest way to remove most of that isMoreSo if you've got a water-based sealer on there probably the easiest way to remove most of that is with one of these little units here that you just hook to the end of a a pressure washer.
Is Valspar concrete sealer oil based?
Valspar | Oil-based | Concrete Stains & Sealers.
How long does masonry sealer last?
Most low solids solutions found in store will last 6 monts to a year, while higher solids solutions, like the Armor SC25 will last for up to 7-10 years. Acrylic Concrete Sealers: Acrylic sealers last 1-5 years before they need to be re-coated.
How long does water based sealer last?
1 to 3 yearsThere are two types of acrylic sealers: water-based and solvent based, both of which have shorter life spans than both penetrating sealers and epoxies. They generally last 1 to 3 years.
How long does wet look sealer last?
The Armor AR350 can last up to 2-5 years before the need to reseal. Surface porosity, environment, surface abrasion, and the amount of material applied will ultimately determine the life of the sealer. Typically, exterior substrates are sealed every 1-3 years and interior substrates are sealed every 3-7 years.
How often do you need to reseal stamped concrete?
Plan to reseal your stamped concrete at least every 18 to 24 months. If you wait too long between sealer applications the sealer will breakdown and allow the color to start fading. Avoid pet accidents over the stamped concrete.
Does stamped concrete last a long time?
Provided it's installed correctly and adequately maintained, stamped concrete will last just as long as non-stamped, or standard, concrete—about 25 years. That's because the processes of installing stamped concrete and standard concrete are mostly the same.
Is it OK to power wash stamped concrete?
Yes. If a mild detergent solution is not effective in removing tough stains from your stamped concrete, you can use a pressure washer to help remove them. A pressure washer is usually helpful in removing stains from leaves, grease spots, or tire marks.
Is it better to spray or roll concrete sealer?
“Certain sealers are better applied by spray because they are not formulated for rolling,” says Dean Owen, president of Arizona Polymer Flooring Inc. in Glendale, Ariz. “This is usually a function of the solvents used in the formulation. Slow-evaporating solvents are better for rolling.
How long does concrete sealer last?
Decorative concrete sealers are available as solvent or water based products and can last anywhere from 6 months to 3 years. Solvent based concrete sealers will last longer ...
What is a penetrating sealer?
Penetrating Concrete Sealers: penetrating concrete sealers are usually silicate, silane, and siliconate based products. They penetrate into the concrete and dry clear; they do not leave any surface enhancement or sheen. Silicate based densifiers last for the life of the concrete.
How long does a silicate densifier last?
Water repellent and waterproofing silane and siliconate based products can last anywhere from 5-10 years.
Why do we use penetrating sealers on concrete?
We like penetrating concrete sealers because they protect the concrete from salts, water and stains, and they wear extremely well in comparison to decorative concrete sealers.
What is decorative concrete sealer?
We have broken down concrete sealers into the following categories: Decorative Concrete Sealers: decorative concrete sealers usually refer to acrylic or lacquer based products. They add color enhancement, shine, wet look and gloss finishes to concrete. They have the shortest longevity; since they sit on the surface of the concrete ...
Why is concrete coating called durable?
The name “durable concrete coating” is appropriate because they are able to withstand abrasions, chemicals, machinery, equipment and heavy traffic. The most important factor in regards to how long do concrete sealers last is surface preparation.
Does concrete sealer last longer than water based sealer?
Solvent based concrete sealers will last longer than water based concrete sealers. Keep in mind that if you like the decorative look you are going to have to pay to keep it up. Durable Concrete Coatings: durable concrete coatings refer to epoxy and urethane based products.
How Long Does Sealer Last on Concrete?
Knowing how long it takes until concrete sealers wear off is important, so that you know when it’s time to reapply. It also helps to know which ones last the longest, so that you can save time and money. However, the type of sealer you use will have the biggest influence in how long it lasts.
Factors That Affect Sealer Longevity
Aside from the type of sealer used, these are the other factors that affect longevity:
What Is the Longest Lasting Concrete Sealer?
Here are some examples of long-lasting concrete sealers, which are available on Amazon:
Frequently Asked Questions
If you aren’t sure if your concrete sealer has worn off, you can check by pouring some water on the surface and observing if it causes the concrete to darken. Should any darkening occur, this means water was absorbed and it’s time to reapply sealer.
What is solid color concrete stain?
The Solid Color Concrete Stain is an acrylic resin, which means it would be , at best, a surface level sealer that would bond to the concrete substrate. Through bonding, it would, ideally, offer a level of protection from water and UV rays from the sun. However, its chemical composition reveals that it is a weak product that will not really protect ...
Is solid color concrete stain the same as paint?
It will, however, give color to your concrete. The Solid Color Concrete Stain is a product very similar to paint than a true concrete stain.
Does Valspar stain concrete?
The Solid Color Concrete Stain manufactured by Valspar is marketed as a concrete staining product that will also seal your concrete, offering an increased level of protection. However, this is not entirely true. The Solid Color Concrete Stain is more of a paint than a concrete sealer; as such, it will not truly protect your concrete ...
Is concrete stain a paint?
The Solid Color Concrete Stain is more of a paint than a concrete sealer; as such, it will not truly protect your concrete from potential sources of damage ranging from water damage to cracking and general degradation.
How long does a sealer last?
These types of sealers are desirable because they can last up to 3-5 years and aren’t impacted by most of the above factors listed. Even though the sealer benefits will extend out to up to 5 years, you may decide to recoat sooner to keep a consistent color enhancement.
What is an acrylic sealer?
Acrylic sealers are designed to leave behind a visible surface film, usually in the form of a low to high gloss. Acrylic sealers leave behind a surface film which makes them vulnerable to several of the above factors. In a perfect environment, a higher quality acrylic like the Armor AR350 (low gloss) or Armor AR500 (high gloss) ...
What is a wet look sealer?
Penetrating wet look sealers are designed to slightly enhance the color of the surface without leaving behind a surface film.
Do wet look sealers leave a film?
Penetrating wet look sealers don’ t leave behind a surface film and acrylic wet look sealers leave behind a low to high gloss film. Penetrating wet look sealers are rarely impacted by the factors listed above and acrylic wet look sealers are. Penetrating wet look sealers don’t need to be reapplied every year but acrylic wet look sealers should be ...
Can you sand a solvent based acrylic sealer?
Resealing a solvent based sealer is as easy as putting a fresh coat down on a clean and dry surface. There is no sanding or scuffing required with a solvent based acrylic sealer. Before choosing a wet look sealer you need to consider the above factors, but also thing about what you want the surface to look like.
Does a wet look sealer protect colored surfaces?
Penetrating wet look sealers won’t prevent colored surface from fading but acrylic wet look sealers will help to protect colored surfaces. Penetrating wet look sealers will offer a slight enhancement to color and acrylic wet look sealers will offer more of a dramatic color enhancement.
