Typical Bathtub Sizes
| Type of Bathtub | Length | Width | Height |
| Alcove Bathtub | 60 inches | 30 inches | 18 inches |
| Drop-in Bathtub | 45 to 72 inches | 30 to 32 inches | 14 to 20 inches |
| Oval Bathtub | 60 inches | 41 inches | 24 inches |
| Whirlpool Bathtub | 60 inches | 32 inches to 36 inches | 18 inches to 23-1/4 inches |
What is the size of a typical bathroom?
The average size of a full bathroom in the US is five by eight feet, or 40 square feet. The average size of a primary bathroom in the US is 115 to 210 square feet, with an average of 160 square feet. The average size of a half bathroom in the US is 20 square feet, though they can range from 18 to 32 square feet in size.
What are the dimensions of a standard bathroom?
Here is the lowdown on the ideal bathroom layout measurements
- Area of the bathroom. A standard guest bathroom (powder room) comprises a sink and a commode. ...
- Commode or WC (water closet) Firstly, one needs to choose between a wall-mounted or a floor-mounted commode for the bathroom. ...
- Standard dimensions for the shower enclosure. ...
- Standard tub enclosure dimensions. ...
- Bathroom door. ...
What is a good size for a bathroom?
- Showers. Showers are required to have a minimum of 1,024 square inches, which is 32 by 32 inches (81 by 81 centimeters) of interior space — although it’s best to ...
- Single sinks. ...
- Double sinks. ...
- Drop-in tub. ...
- Small soaking tub. ...
What is a standard bath size?
Traditionally, a standard bath measures 1,700 mm in length and about 700 mm wide. This is the standard bath but you can also buy a smaller or bigger one depending on your needs. Normally, the smallest bath you can find measures between 1,400 mm and 1,500 mm in length and 700 mm wide.
How long is a standard bath in feet?
Freestanding bath dimensionsNameLength (mm)Width (mm)Orchard Wharfe freestanding bath 1770 x 8001770mm800mmThe Bath Co. Dulwich freestanding single ended bath 1500 x 7801500mm780mmThe Bath Co. Dulwich roll top freestanding bath with chrome claw feet 1695 x 7001695mm700mm1 more row
What length do baths come in?
If you don't have enough space for a standard bath, a small bath would most likely suit you better. Small baths generally measure between 1400mm-1600mm in length. The width will usually stay the same as a standard size bath (700mm).
How big is a 2 person bathtub?
Common freestanding bathtub sizes for 2 people A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.
How much room do you need for a bath?
While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide. Always allow clear space for access to plumbing and/or whirlpool motors.
What is the standard bath size?
What is a standard bath size? Before the widespread use of the metric system, it was generally accepted that the standard bath size in the UK was 5 foot 6 inches in length. Of course, this now translates as a bath size of 1700mm in length x 700mm in width, which is the most common bath size we sell at Victoria Plum.
How big is a bath?
The largest bath we stock is 1800mm in length and up to 850mm wide. That's 5 foot 9 inches, which is just shy ...
How big is a UK bathroom?
As the average UK bathroom is around 2.3m x 2.7m in size, this would make sense, as it still leaves at least 0.7 metres or 1 metre of clear space, depending on the orientation of your bath. One important thing to remember when measuring for your straight bath is that tiles may give you a false impression of the space you have available.
What is a corner bathtub?
As the name suggest corner bathtubs have been installed at the corner of a bathroom. It is a great choice for the master bathroom especially when you want to relax I in the tub with a book or watch wall-mounted TV. These types of bathtubs are designed for the luxurious people who want to use the bathtub for long and not only to just get clean rather also used for de-stress, meditation and calming soaks.
Why are freestanding tubs heavier than freestanding tubs?
Freestanding tubs are heavier because of material used and they are easily distinguishable for their modern design and superb finishing. It is recommended to go for freestanding tubs if your bathroom has enough space; because this type tubs need more space to accommodate. Recommended size for this type of bathtubs:
Is a walk in bathtub safe?
There exist door on the side by which one can easily walk and seat into the bathtub. This side door should be closed before starting bathing. Bathing is done on a top seat of the bathtub. Walk-in bathtubs are safer than the other bathtubs because of its designated design. There is a safety handrail and grip to keep head above the water level and ease out from the bathtub itself.
How wide is a bathtub?
For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
How deep is a corner bath?
Common size or standard dimensions of a corner bath are: 60 inches by 60 inches or 5ft by 5ft with a water depth of 20 inches (1.6ft). Small sizes run 48 inches by 48 inches (4ftx4ft) with a water depth of 18 inches (1.5ft). Large sizes running at 72 inches by 72 inches (6ftx6ft) with a water depth of 20 inches. (1.6ft).
What is a freestanding tub?
Freestanding tubs are tubs that are unconnected to any walls or surfaces. Depending on the material, freestanding tubs are slightly heavier and are usually distinguishable by the smooth lines and modern design. Freestanding tubs require a rather large bathroom to accommodate the size of the tub as well as the increased weight. If you’re unsure about the size of a freestanding tub and want to learn more about the materials, Badeloft offers FREE bathtub templates and material samples for freestanding bathtubs. Click HERE to request one.
What is an alcove bathtub?
Alcove Bathtub. The most common bathtub on the market, and what most people consider to be the standard bathtub. Affordable and easy to install, the only drawback is its relatively small size. Alcove bathtubs usually fit within a three wall enclosure, making them ideal for a shower combination as well.
How deep is a freestanding bathtub?
Common or standard dimensions for a freestanding bathtub are: 60 inches long (5ft), 30 inches wide (2.5ft) with 19 inches of water depth (1.89ft). Small freestanding bathtubs can run 55 inches long(4.58ft), 27 inches wide (2.25ft) with a water depth of 15(1.25ft).
What is a drop in tub?
Drop in Baths. Most bathtubs have a visible finished side, usually called an apron or skirt, which is flat or bowed. Drop in tubs have no finished sides and are usually installed in an alcove or peninsula jutting out in the middle of your bath space.
How deep is a drop in tub?
Standard dimensions again are similar to drop in tubs running at: 60 inches long(5ft), 30 inches wide(2.5ft), with a water depth of 16 inches(1.3ft).
What is a freestanding bathtub?
1. Freestanding bathtub. Freestanding tubs are among the easiest to recognize. As the name suggests, they are freestanding units that are not attached to any walls. They are often placed in the center of a bathroom and can create a striking effect of luxury and opulence.
When measuring a bathtub, do you measure from the same point?
When measuring, make sure that you measure from the same point on each side or at each end. If not, you will end up adding extra length or width to the true dimensions. When you have taken these measurements and you are sure about their accuracy, you are ready to start shopping for a new bathtub.
What is an undermount tub?
Undermount tubs are similar to drop-in tubs but are fitted into a deck that’s usually made of a material like tile or stone. They can be a striking visual element in your bathroom, creating a lavish feel, but installation is more expensive.
What is an alcove bathtub?
Although there is no such thing as a “standard” tub, the alcove bathtub is probably the design that comes closest to fitting this description. They are usually enclosed by three walls in an alcove, hence the name.
What are the sizes of a sleeve?
Although these are not the only possibilities, the most common sizes are as follows: 1 Small: 48” x 48” x 18” high 2 Medium: 60” x 60” x 20” high 3 Large: 72” x 72” x 20” high
Do you need to take measurements before buying a bathtub?
These measurements are only guidelines since each manufacturer produces bathtubs with slightly different dimensions. However, what is more important is that you take accurate measurements of your space before buying a tub.
Can you put a freestanding bathtub in the center of a bathroom?
As long as you have enough space in your bathroom, you don’t have to worry about the exact dimensions. Having said that, bear in mind that placing a freestanding bathtub in the center of a space that is too small to accommodate it will have a negative effect.
How long is a standard tub?
If you like taking nice long baths, this is probably your most economical option, though you might need to replace the tub surround or tile. Standard tub length: 60 inches (5 feet) Stand tub width: 32 inches. Standard tub height: 18 inches.
How wide is a small tub?
Some small tubs have an interior soaking width of 22 inches. Actually getting inside the tub before you buy is a good idea to ensure that a small tub will work for you. Small tub length: 43-55 inches. Small tub width: 30 inches. Small tub height: 14-15 inches.
How tall is an undermount tub?
While undermount bathtubs might not be obviously more expensive than an alcove, they require more expense in labor and materials framing for the tub and tiling or stone. Undermount tub length: 60 inches. Undermount tub width: 30 inches. Undermount tub height: 16 inches.
What is an alcove tub?
One of the most common tubs, an alcove tub, sits at the end of a small bathroom width wise, flanked by three walls. An alcove tub has one finished side. The other three sides are unfinished, usually with a small lip for tiling over to prevent water damage.
How deep is a soaking tub?
The shortest tubs are 14 inches tall, but only have about eight inches of soaking depth. A shallow tub like this is fine for people who mostly shower, bathe children, and don’t want a tall tub to step in to.
How wide is a Whirlpool jet tub?
Tubs that cycle water cannot have soap or salts going through the jet tubes. Whirlpool tub length: 60 inches. Whirlpool tub width: 32-36 inches.
What is a drop in bathtub?
Drop in bathtubs are similar in dimensions to alcove tubs, except that the front of the alcove must be built up as well instead of having a finished front piece. You end up with a tiled front and a more finished and luxurious look.
What is the standard size of a bath?
What Size Is A Standard Bath? 1700mm long x 700mm wide. Before the metric system, it was accepted that the standard bath size in the UK was 5’6” in length, this now translates to 1700mm, which is the most common bath size.
How big is a small bath?
Small baths generally measure between 1400mm-1600mm in length. The width will usually stay the same as a standard size bath (700mm). However, if you have very limited space, perhaps consider a corner bath.
How to measure a bath?
To do this, stand by the side of it (as if you’re about to get in) and measure the distance from the left side of the bath to the right, this will give you the length. Repeat this process going ...
How much space does a standard bathroom leave?
If you have a bathroom of average size (2.3mx2.7m), a standard bath would leave approximately 1 metre of clear space. Although this is dependent on the orientation of the bath.
How tall is 1800mm?
1800mm equates to around 5 foot 9 inches, according to the ONS, this is the average height of a man in the UK. The average height for a woman in the UK is 5 foot 3 inches, therefore, a large bath would provide more than enough space to spread out and relax.
