how long is my chainsaw bar

Measure the bar from end to end to find its true length.

• For example, if the measurement is 16 1⁄3 inches (41 cm), then the true length of the bar is 16 inches (41 cm).
• Standard chainsaw bar lengths are between 8–24 inches (20–61 cm).
• The true length of the chainsaw bar will always be longer than the cutting length.

Full Answer

How to determine bar length on Chainsaw?

To make this process simpler, make use of the following method:

• Look for a penny, dime, and quarter.
• Clean the dirt and debris away from the bar’s groove.
• Put each coin into the groove of the chainsaw bar.
• The coin that fits perfectly without applying any additional force will serve you the gauge measurements.
• For a penny, the gauge will be 0.058-inch, 0.050-inch for a dime, and 0.063-inch for a quarter.

More items...

How to determine chain length for your chainsaw?

The proper way for how to measure a chainsaw chain length is as follows:

• Count the drive links — Count the individual links on the chain one by one.
• Measure the pitch — This is the distance between each drive link. Measure the length between any three rivets. ...
• Measure the gauge — This is the width of the groove on the chain that fits on the bar. Common gauges include .043″, .050″, .058″, and .063″. ...

How do I measure the length of my chainsaw chain?

• Ensure that you’ve turned off the chainsaw. ...
• Find the cutting length of the chainsaw bar by laying a tape measure at the very tip of the chain. ...
• Round up to the nearest inch.
• Keep the number from step three on hand to help purchase chain for the chainsaw.
• To find the overall bar length, remove the plastic or metal casing on the chainsaw.

More items...

What is the best lightweight chainsaw?

What is the best lightweight chainsaw? Looking for an answer to the question: What is the best lightweight chainsaw? On this page, we have gathered for you the most accurate and comprehensive information that will fully answer the question: What is the best lightweight chainsaw? Husqvarna T435 is the best overall top handle chainsaw because it has all features for easy maintenance and comfort.

How do you measure the length of a chainsaw bar?

To measure a chainsaw's effective cutting length (or simply, “length”): Place a tape measure at the very tip of the bar. Measure straight back to the point where the bar enters the chainsaw body. Round that measurement up to the nearest even number.

How do you measure the length of a bar?

0:031:02How to measure a chainsaw guide bar - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're just going to give you a quick demonstration on how you get that measurement a guide barsMoreWe're just going to give you a quick demonstration on how you get that measurement a guide bars measured from the front of the saw to the tip of the bar on. This may talks three at one.

How long is the chain for a 20 in bar chainsaw?

Oregon Chainsaw chain for Stihl Chainsaw 20" Bar Length 72 Drive links 3/8 Standard 0.05 Gauge.

How long is a 24 chainsaw bar?

Round the measurement to the nearest inch to know the true length of the chainsaw bar. For example, if the measurement is 16 1⁄3 inches (41 cm), then the true length of the bar is 16 inches (41 cm). Standard chainsaw bar lengths are between 8–24 inches (20–61 cm).

Can you put a 20 inch bar on a 16 inch chainsaw?

1:186:59What size bar is right for your chainsaw? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlso approach pro. Saw. So the common bar sizes on these two chainsaws. They come typically with aMoreAlso approach pro. Saw. So the common bar sizes on these two chainsaws. They come typically with a 16 to 20 inch bar on it the main.

Are chainsaw bars universal?

No, chainsaw bars are not universal. There is no one-size-fits-all chainsaw bar. When you have to replace your old or broken chainsaw bar with a new one, brand and model always play a role. In most cases, it is possible to use a bar from a Husqvarna as a replacement for the one you have on your STIHL chainsaw.

How do I know my chain size?

To measure the chain size, if you have just the sprocket, use calipers to measure between the teeth. Measure from center to center of where the chain roller would set between the teeth that will give you the pitch. Once you know the pitch you can determine what chain size you would need.

What does 72 mean on chainsaw chain?

72 = 3/8 pitch .050 gauge or 1.3mm. 73 = 3/8 pitch .058 gauge or 1.5mm.

Are all 20 chainsaw chains the same?

Several manufacturers produce chainsaw chains, and the different brands are not interchangeable with all models. If you replace your chain with another brand, you must know the exact gauge, length, and pitch of the old chain. Installing the wrong chain can result in bodily injury or damage to the machine.

What is the most common chainsaw length?

The standard blade sizes for medium- to heavy-duty chainsaws are 14 to 18 inches, with engine displacements of 40 to 50 cc. Heavy-duty saws with long blades are adequate for heavy yard work, though in many cases they tend to be overkill and can actually hinder you on a small job.

What is the most common chainsaw size?

Most residentially used chainsaws fall between 16 and 24 inches of bar and chain length, and are supported by 32 to 62cc engine displacements (although 62cc is on the high end for most property management purposes).

How big of a tree can you cut with a 14 inch chainsaw?

Felling medium trees – 16” to 18” Cutting down medium size trees with a trunk of about 14″ to 16” will require a larger chainsaw of about 16″ to 18” to fell the tree in one easy pass.

How do you calculate the length of a steel bar?

1800 BendCover is taken as B and diameter of bar is taken as D.Additional length for each hook = 9D.If hook is located at one end, total length of bar = L + 9D.If hook is located at both ends, total length of bar = L + 9D + 9D.

What is the length of 12mm steel bar?

12 meterProduct SpecificationDiameter12mmGradeFe 500MaterialMild SteelSingle Piece Length12 meterSize12mm3 more rows

What is a length bar?

Length bars and long gauge blocks in both metric (up to 1270 mm) and inch (up to 50 inch) sizes can be measured. The measurements are made in environmentally-controlled laboratories using purpose-built equipment designed by NPL. Three services are offered: Standard accuracy.

What is the height and width of a bar?

Standard Bar Dimensions Bars come in different sizes and dimensions, but standard 42 inches or 106.68 centimeters bar heights would fit a 30 inches or 76.2 centimeters stool to be used for seating a patron easily and comfortably.

How to measure chainsaw bar length?

Measure from the tip of the bar to where it enters the body for the cutting length. Start the end of a tape measure where the bar goes inside the main chainsaw body. Extend the tape until you reach the tip of the bar and record your measurement. Round the measurement to the nearest inch to know the cutting length of your bar.

What is a chainsaw bar?

The bar on a chainsaw is the metal part that extends out from the body that the chain wraps around. If you need to determine the size of your chainsaw bar so you can get a replacement, there are easy ways to measure the length. Many measurements refer to either the cutting length, which is how far the bar sticks out, or the true length, ...

How to remove the bar on a chainsaw?

Take the clutch cover off of the chainsaw to remove the bar. Locate the 2 nuts on the right side of your chainsaw holding the clutch cover in place, and use a wrench to unscrew them. Once you take off the nuts, pull the cover straight off of the chainsaw to expose the rest of the bar.

How to fix a chainsaw that won't start?

1. Unplug the spark plug wire so the chainsaw doesn't start. Set your chainsaw down on a flat surface so the handle is face up. Locate the screws or bolts holding the top cover on the chainsaw's body and use either a screwdriver or wrench to loosen them.

What is the standard chainsaw gauge?

The standard gauge sizes are 0.050 inches (1.3 mm), 0.058 inches (1.5 mm), and 0.063 inches (1.6 mm). Your chain gauge may also be 0.043 inches (1.1 mm), but it's not very common.

Why wear gloves when chainsaw chain is sharp?

Wear work gloves to help protect your hands from the chain's teeth since they can be sharp.

What is the average chainsaw cutting length?

The average cutting lengths on most chainsaws are 14 inches (36 cm), 16 inches (41 cm), 18 inches (46 cm), and 20 inches (51 cm). ...

Where is the chainsaw bar stamped?

Your current chainsaw bar is likely to have all of the measurements you need for a chain replacement stamped right on the blade itself.

How long can a gas chainsaw chain be?

Some gas chainsaws, on the other hand, can go up to a whopping 72 inches in bar length because they have the beefy engines to handle it. Another thing to keep in mind is that chainsaw chains don’t stretch. Each one is designed to fit on a certain size bar. For example, if the chain is too short or too wide for the blade, it won’t fit.

How to measure drive link pitch?

Measure the pitch — This is the distance between each drive link. Measure the length between any three rivets. The rivets are what hold the drive links together. Then divide by 2 to get the pitch. Common pitch sizes include 1/4″, .325″, 3/8″, and .404″.

What is the effective cutting length of a chainsaw?

The effective cutting length is the span of the bar from the tip of the blade to the base of the where it’s attached to the chainsaw.

How much does a bar chain cost?

A new bar or chain can cost around $20 to $50 each (or $40 to $100 in total).

How to tell gauge of bar?

Try to slide each coin into the groove of the blade. Whichever one fits snugly without force will tell you the gauge of the bar.

Where is the bolt on a chainsaw?

These bolts are located on the right side of the chainsaw body just past the base of the bar. Once the chainsaw blade is removed, lay it flat on the ground (or table). Then, measure the distance from end to end and don’t round up. Since this is the true length of the blade, there’s no need to adjust the measurement.

How long is a chainsaw bar?

Standard chainsaw bars range between 8 and 24-inches, but to find out the exact length, you might have to get out your tape measure and get the precise measurements yourself. The bar length varies depending on the task required for use and the overall size of the device.

What is a chainsaw blade bar?

The Chainsaw Blade Bar. A chainsaw blade bar is the device’s part that holds the chain in place. The blade itself is not the component that does the cutting but rather the part that guides the chain to cut. You can purchase either a standard or carving bar, depending on your use.

How to measure chainsaw chain?

Measuring your chainsaw chain is a bit more intensive than measuring the blade bar. Instead of unhooking the chain and using a tape measure to gauge the length, you have to take measurements of the chain pitch and gauge.

How to measure the length of a chainsaw blade?

Measure From the Nose to the Mounting Slot. To measure the cutting bar length, you’ll take the tape measure and start near the bar’s mounting slot where the chain bar meets the chainsaw body. Run the tape measure from the chainsaw body along the length of the bar blade out to the end of the blade nose. This is the length of your chainsaw bar blade ...

What is the nose on a chainsaw?

The nose (also known as the tip) The nose sprocket. Your chainsaw bar blade may seem lengthy, but when you go to measure it directly, you’ll find that the length you see is not the measurement you’ll get. Instead, you will take the measurement of the cutting length rather than the full device length.

What are the factors to consider when determining the size of a chainsaw chain?

Chain Size. Ultimately, there are two factors to consider when figuring out your chainsaw’s chain size: its length and depth. Both factors determine whether or not the chain is suitable for the device’s size. If the chain is too long, it will not fit tightly enough around the bar.

How to tell gauge of chain?

You can get your chain gauge by comparing the chain’s groove width to either a dime, penny, or quarter. A quarter equals a .063-inch gauge while a penny equals a .058-inch gauge, and a dime measures a .050-inch gauge. Whichever your chain groove looks closest to gives you your estimated gauge.

How long is a chainsaw bar?

A short version of the answer is: The maximum bar length recommended by manufacturers for gasoline-powered chainsaws scales with engine size and averages to around 4” per 10 cc of cylinder displacement. While chainsaws could technically take any length bar with the right mount type and chain pitch, the recommended maximum indicates the upper limit for efficient and safe operation.

What is the maximum bar length for a saw engine?

saw engine size can be formed: for gasoline-powered saws, the maximum bar length in inches is 4/10 times the saw engine displacement in cc. This can be expressed mathematically as

How to find out maximum bar length?

The best way to find out how long a bar should you be mounting on your chainsaw is to check the manufacturer recommendations for your saw model.

How many cc can a chainsaw run?

A chainsaw can run 1 cm of bar length per 1 cc of cylinder displacement. In the table below, you can see what kind of maximum bar lengths this 4”/10cc rule produces for common engine sizes. Engine size. [cc] Max bar length. [in] [cm] 30 cc. 12”.

What makes a guide bar compatible?

What makes a bar compatible? In short, a guide bar is compatible with a certain chainsaw if it has two things: the same bar mount type and the same chain pitch as the saw.

Why do chainsaws have a 40 bar?

To give an extreme example, putting a 40” bar on a 30 cc saw would make little sense, as the engine would not have ...

What is the rule for saw size?

Using the rule. The rule is intended to give you a rough idea of the bar length each saw size can typically run well . A few points: You can use the rule to roughly determine the max bar length for your saw in case you find no info from the saw manufacturer.

How long is a chainsaw bar?

Normal chainsaw bars, on the other hand, range from 35 to 76 cm in cutting length.

How do you measure the chainsaw bar? Where do you measure it from?

the tail-tip distance, is not a valid parameter for measuring a chainsaw bar.To measure a chainsaw bar, take into account the cutting length , the useful length of the bar, which is equal to the part of the bar that comes out of the chainsaw body.

What do the numbers mean on a chainsaw bar?

Therefore, the characteristics of the attachment plan of the chainsaw blade are essential in the choice of the chainsaw bar and are summarized by the last letter and the last 3 numbers of the bar type identification code, for example “K095 ”. Now let’s explain better:

How to Measure a Stihl Chainsaw Bar?

One of the parameters of the guide is its size. Typically, chainsaw guide rail size is indicated in inches, sometimes in centimeters.

What is the blade on a chainsaw?

This is the blade that extends from the chainsaw engine casing and carries the chain which is what makes the cut for you.

What type of bar is used for a 162 chainsaw?

For example, for the Efco 162 professional chainsaw , the manual recommends several types of bars , including the 168RNDK095 type.

Why is it not recommended to install a chainsaw bar longer than indicated by the manufacturer?

It is not recommended to install a chainsaw bar longer than indicated by the manufacturer, because this affects the engine speed. The longer the chainsaw bar, the more the engine spends power to rotate the crankshaft to accelerate the chain, and this affects engine wear. This is the most important rule to follow.

How to measure chainsaw bar length?

To find the called length of your chainsaw bar, measure it from its front tip all the way back to the cutter closest to the body of the saw. Round this measurement up to the nearest even number in inches. For example, a bar that measures 18 3/4" will actually have a called length of 20".

Why do electric saws use 18" bars?

For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That's why electric saws use bars 18" and shorter. Similarly, chainsaw chains are measured to fit certain bars.

How to measure chain pitch?

To determine the pitch (chain size), you'll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.

How to determine the size of a replacement chain?

There are two ways that you can figure out the size of your replacement chain even without access to a product manual: measure the chain yourself, and look on other parts of the saw for the measurements.

What is the pitch of a replacement chain?

The most common measurements of pitch you'll see on replacement chain are 3/8" and .325".

What is the body of a saw?

The body of the saw holds the motor or the engine, but it's impossible to underestimate the importance of the parts that actually do the cutting: the bar and the chain.

Can you measure your bar and chain?

Don't worry. You can measure both your bar and your chain to determine which replacement parts you should get.

What does it mean when a chainsaw has a longer guide bar?

Generally speaking, the higher the power of a chainsaw, the longer the guide bar it can handle.

What affects the compatible length of chainsaw bars?

The biggest thing that affects the compatible length of chainsaw bars, is the engine power of the chainsaw. That’s what we’ll focus on in this section.

What else to change with the bar?

Before you change your guide bar, you will also want to consider the other chainsaw components this might impact.

What is the difference between an 18 inch bar and a 16 inch bar?

Compared to a 16-inch bar, the 18-inch bar would obviously have a longer cut length . However, the chain also has more distance to travel away from the engine. So running at 16-inches has less length, but more kick. You get the picture.

Do you need a new chain for a bar?

If you increase (or decrease) the length of your bar, you will definitely need a new chain. This is pretty straight forward, if the bar gets longer, you’ll need a longer chain to wrap around it. In addition, you may need to replace your sprocket.

Does chainsaw cutting performance decrease?

Another thing to keep in mind , is that as you increase the length of your chainsaw bar, the cutting performance will decrease. So as you move towards the upper end of the bar range, you can expect your chainsaw to cut with a bit less power . It’s a trade-off between the length of the cut, and the power applied to the chain.

How to check bar track on chainsaw?

To check your bar track, first, remove the front panel of your chainsaw and remove the bar and chain. Seperate the bar from the chain and put your gauge inside the bar track like so: On each gauge tool there is a mark that designates when a bar is too low to be used.

Where is the nose sprocket on a chainsaw?

The nose sprocket is on the end of the chainsaw bar , it has teeth and spins just like the sprocket on the other end of the chainsaw.

How to tell if a bar is worn out?

There are five things that indicate if your bar is too worn out. The bar is very bent, the bar track sides are too wide, the bar track sides are too low, there are pinches in the bar track, and/or the nose sprocket is damaged. In this article we’ll dive into each of these and show you how to test your bar to find out if it needs replaced.

What to do if you find pinches on your bar?

If you find some pinches on your bar and you aren’t sure how long they’ve been there, you may want to check your chain for wear and tear.

What happens if your bar track is too wide?

If your bar track gets too wide it can cause your chain to jump out of the track which is not a good thing.

Why does my bar wear out?

The increased friction from the lack of oil can cause some severe wear to your bar. If our bar starts to look like this, give it a serious inspection to make sure it’s still usable.

What does it mean when your bar is pinched?

Pinches in your bar are exactly what they sound like. They occur when the sides of your bar track have been pinched or pushed inward.

How long does a chainsaw guide bar last?

A chainsaw guide bar will last for years as long as the chainsaw is oiling properly , the chain is in good condition and the sprocket on the chainsaw is in proper condition.

When should I replace my chainsaw bar?

The two most important things that affect the quality of cut on a chainsaw are the chain and the guide bar. The chain and guide bar are under constant load and will eventually need to be replaced no matter how well you maintain your chainsaw. This post will cover when should you replace the guide bar on your chainsaw from wear and tear and not from accidental damage.

What is the best tip bar for cutting?

Sprocket tip bars are really the preferred bar for cutting in clean conditions. The downside of a sprocket tip bar is that it has more points of wear and tear than a hardnose bar does. The sprocket is usually the first part of the bar to show signs of being worn.

What are the two categories of guide bars?

There are primary 2 broad categories of guide bars that we will address in this post. The two categories are sprocket tip and non-sprocket tip, also known as hardnose bars. The two bars are functionally the same with the only real difference being the tip of the bar with one having a sprocket to carry the chain and the other not having ...

Why are hard nose bars not as effective as sprocket tip bars?

Hard nose bars are not as efficient as sprocket tip bars due to the lack of a sprocket on the bar's tip. However, the lack of the sprocket makes hard nose bars significantly more durable and especially suited to cutting in dirty conditions. If there is no sprocket to keep clean and free of debris, there is one less failure point.

Do nose bars slow down chainsaws?

Keep in mind that hard nose bars will slow down the chainsaw somewhat when compared to sprocket tip bars. There are trade-offs to using each bar. It is up to you to decide what’s important to you, speed or durability. Often people will install a new chain when they notice their chainsaw is not cutting properly.

Can you replace a chainsaw bar with a sprocket?

Sprocket failure is the most common failure of this type of bar. If you have a replaceable tip sprocket bar you can simply replace the tip of the bar. In my experience, unless you provide the labor to replace the tip yourself, I would recommend just purchasing a new bar. By the time you pay for labor and parts, it may be cost-effective to replace the chainsaw bar.

Why Is Bar Length Limited?

See all 4 steps on www.wikihow.com

How to Find Out Maximum Bar length?

Bar Length vs. Engine Size

A Note on Bar Compatibility

See more on workshoppist.com