how many btu is a fireplace

How many BTU per hour does a fireplace use?

How many BTU does a gas fireplace use? Gas Fireplaces Log sets may use anywhere from 60,000 to 90,000 BTUs per hour and are very inefficient for heating, since most of the heat goes right up the chimney.

How do you build an electric fireplace?

• We took one 2×4 and cut 4- 8 inch lengths off of the 2×4. ...
• We measured the height of our wall, floor to ceiling. ...
• Nail the 8 inch pieces of the 2×4 ( from step 1) to the tops and bottoms of the studs ( determined in step 2 ), to create the 2 ...
• Bring the side walls into the house and put them in place. ...

More items...

How to set up an electric fireplace?

• There is a nearby wall socket.
• The fireplace power cable is long enough to reach the wall socket, without the need for an extension lead.
• The power cord isn’t plugged into an external timer device.
• The appliance isn’t located on high or long pile carpet.
• The power cord can be placed a safe distance away from the heater part of the electric fireplace.

More items...

Should you buy an electric fireplace?

You probably shouldn't buy an electric fireplace if you're looking to save money on your energy bills. They're not any more efficient than regular electric heaters (and electricity in general tends to be more costly than natural gas), but they cost more.

What is BTU in heating?

How many square feet is a Heirloom 50 fireplace?

What is a heirloom fireplace?

What is Novus fireplace?

How many BTUs is a typical gas fireplace?

Gas Fireplaces Log sets may use anywhere from 60,000 to 90,000 BTUs per hour and are very inefficient for heating, since most of the heat goes right up the chimney. Gas fireplaces come in a much larger range of BTU outputs, from about 10,000 to 70,000 BTUs, and they heat more effectively.

How many BTU should my fireplace be?

For fireplaces, the higher the BTUs, the higher the heat output. But how do you know how many BTUs are right for your home?...Novus.ModelBTUsSpace it will HeatHeirloom 3627,000 – 45,0001,100 – 1,800 square feetHeirloom 4230,000 – 54,0001,500 – 2,500 square feetHeirloom 5036,000 – 65,0001,900 – 3,000 square feet

What is the average BTU of a electric fireplace?

1,000 to 7,000 BTU'sTypically electric fireplaces will produce anywhere From 1,000 to 7,000 BTU's. In comparison a gas fireplace may produce anywhere from 19,000 to 48,000 BTU's. With electric fireplaces the heat is generated from an internal heater. The BTU output can be measured by the kW consumption of the heater.

How many BTU is a gas fireplace insert?

Gas Fireplace Insert Size Small: 10-18,000 BTU – up to 800 sq. ft. Medium: 25-30,000 BTU – up to 1400 sq. ft.

Do you lose heat with a fireplace?

The answer is yes, to a point, they do. Especially if it's a gas-lit fireplace versus a wood burning fireplace, they will definitely cause some heat loss because everything's vented through the chimney.

What produces more heat gas or wood fireplace?

Emissions Above: According to the EPA, traditional wood-burning fireplaces emit 28 pounds of particulants per MMBTU (one million BTUs) of heat output as opposed to natural gas, which produces up to 99 percent less (about 0.28 pounds per MMBTU).

How many BTU do I need for a 20x20 room?

As a general rule, a 20×20 feet or 400 square feet room should use a 12,000 BTU or 1 Ton air conditioner. If your room is heavily shaded, you can save cost by using a 9,000 BTU or 0.75 Ton air conditioner.

Do electric fireplaces use up a lot of electricity?

The average electric fireplace uses nearly 1500 watts of power. If you use it just for ambience, then the cost can range anywhere from $0.003 to $0.03 per hour. However, if you use a heating unit as well, the costs will go up to around $0.09 per hour for a medium setting and $0.18 per hour for the maximum setting.

Do LED fireplaces give off heat?

Depending on your model, the LED fireplace might have electric coils or use infared technology to produce heat. An electric unit sends electricity through coils, which heat up. Fans then push the heat into the room.

Do gas fireplaces use a lot of gas?

A standard 20,000 BTU gas fireplace will use about 20 cubic feet of natural gas per hour. Given that price of natural gas is about $1.09 per 100 cubic feet, running a standard-sized gas fireplace will cost about $0.22/hour at 100% heating output. In short: Gas fireplaces are quite inexpensive to run.

Does gas fireplace use more gas than furnace?

Gas fireplaces use less gas than other traditional heating methods such as furnaces. The amount of gas that a fireplace uses is dependent on many factors such as the BTU rating, unit type, and how frequently the system is used.

Do gas fireplaces give off much heat?

Do Gas Fireplaces Put Out Much Heat? Gas fireplaces can typically produce anywhere from around 5,000 BTUs to 40,000 BTUs, depending on the model of fireplace, but the average heat output for a gas fireplace can be between 25,000 and 30,000 BTUs.

Is 50 000 BTU good for a fire pit?

While you need a fire pit with a heat output of 50000 – 60000 BTU to warm up a larger area. The pit with 70000 BTU (or above) is considered the most powerful that effectively work to heat up the area quickly, but they are a bit hard to use.

Is 40 000 BTU good for a fire pit?

A BTU of between 40,000 and 150,000 BTUs is ideal for a fire pit. 40,000 BTUs is best for most small patios or decks. If you have a med-large patio or deck then you should choose between 60,0000 and 100,000 BTUs.

What size of gas fireplace do I need?

As a basic benchmark, a small gas fireplace will heat less than 500 sq. ft., a medium gas fireplace will heat between 500 – 1,000 sq. ft, a large gas fireplace will heat between 1,000 – 2,200 sq. ft., and an extra-large gas fireplace will heat over 2,200+ sq.

What is the difference between 30000 BTU and 50000 BTU?

Generally, 30,000 BTUs will warm a radius of 5 to 8 feet, 50,000 BTUs about 8 to 10 feet, and so on. Electric heat is typically measured in watts, but you can convert it to BTUs by multiplying it by 3.41 (so a 5,000-watt heater would put out approximately 17,050 BTUs).

Why is it important to check the BTU of an appliance?

It's important to check the BTU of an appliance to ensure that it’s in the proper BTU range for what you need. An insufficient fireplace BTU rating, for example, will operate all the time and still leave you cold. However, you don't want to spend too much money on a unit that produces far more BTU than what your home needs.

What is BTU in cooling?

Cooling – Since BTUs are used to measure the amount of energy required to heat a pound of water , you’re probably wondering how this works as a form of measurement for cooling devices. The BTU number on cooling devices measures the amount of energy used to remove heat from the air rather than the amount of heat output.

What is the purpose of BTU?

For hundreds of years, BTUs have been used to measure energy and it’s the most widely used thermal measurement for determining heating and cooling capacity. The BTU rating of an appliance indicates how powerful it is. This is referred to as the BTU per hour rating. A heater that has 12,000 BTU on the label can produce 12,000 BTUs per hour.

How to compare energy sources?

For instance, you can compare energy sources by converting electricity, propane, natural gas, or wood into BTUs. Wood burning fireplaces, heaters, outdoor grills, ovens & stoves, and other common home appliances all measure their energy output in BTUs, as well as refrigerators and other cooling devices like window air conditioners, portable air conditioners, central air conditioners.

What is the difference between a 9 foot ceiling and a high ceiling?

High ceilings add to the room's overall volume and use more energy to heat or cool the air than standard 9-foot ceilings.

Do you need more BTU for insulation?

Depending on the type and quality of insulation you have, you may require more or less than the standard BTU suggestion. Here’s a little truth bomb: If your home is very drafty or poorly insulated, it's as if you're paying to heat the outside of your house as well.

How Many BTUs Is An Electric Fireplace?

BTU, which stands for British Thermal Unit, is a standard of measurement used to represent the power of an electric fireplace and therefore the heat output.

How much heat does an electric fireplace generate?

However, most electric fireplaces can only generate the maximum amount of heat from a 120V supply, which can be around 5000BTUs based on a plug-in connection to a nearby electrical outlet.

How many BTUs does a Dimplex fireplace produce?

This can be seen in the example that we used earlier, where if the Dimplex Revillusion Built-In Electric Fireplace is hard-wired into your home electrics then it can produce up to 8794B TUs and heat up to 800sqft of area, from 240V.

What is BTU rating?

BTUs are the standard measurement of heat output from an electric fireplace. The higher the BTU rating the more heat an electric fireplace can produce. The heater technology will have a larger impact on the size of room an electric fireplace is able to heat compared to the BTUs. For heating larger rooms up to 1000sqft look to buy an infrared ...

What type of heater does an infrared fireplace use?

Infrared electric fireplaces use an infrared heater instead of a fan heater.

How much space does a fan forced electric fireplace heat?

Conventional fan forced electric fireplaces will typically be able to heat spaces up to 400sqft, while those that can be hard-wired in may be able to heat up to 800sqft.

Is an infrared fireplace better than a fan?

Infrared electric fireplaces are therefore more ideal when it comes to heating larger areas compared to fan forced electric fireplaces, even though the BTUs are shown to be only slightly more.

How many watts does an electric fireplace use?

Most electric fireplaces draw about 1,500 watts and can heat spaces up to 400 square feet. There are larger models available that consume more energy and heat larger spaces, but since electric fireplaces are only for zone heating, the standard 1,500-watt models work for most homeowners.

How much does it cost to run an electric fireplace per hour?

Based on the national average kilowatt-hour (kWh) rate of 12 cents, a 1,500-watt electric fireplace will cost around 18 cents per hour with all settings at maximum. If you use a lower heat setting, the cost per hour can drop by several cents, and if you only use the LED-backlit fire display and not the actual heater, the cost is often less than one cent per hour.

How Much Will a Fireplace Raise My Electric Bill?

Most electric fireplaces draw about 1,500 watts and can heat spaces up to 400 square feet. There are larger models available that consume more energy and heat larger spaces, but since electric fireplaces are only for zone heating, the standard 1,500-watt models work for most homeowners.

How many BTUs does a log use?

Log sets may use anywhere from 60,000 to 90,000 BTUs per hour and are very inefficient for heating, since most of the heat goes right up the chimney. Gas fireplaces come in a much larger range of BTU outputs, from about 10,000 to 70,000 BTUs, and they heat more effectively.

Is a gas fireplace self contained?

First, these appliances fall into two broad categories: gas log sets, which sit inside a traditional wood-fire fireplace, and gas fireplaces, which are self-contained units whether or not they're used in conjunction with traditional fireplaces.

Is propane more expensive than natural gas?

Propane is generally more expensive , but for residents in rural areas that lack natural gas hookups, it's often the only option for heating fuel. The prices of both fuel types fluctuate, but natural gas prices are more stable.

Is it better to curl up in front of a fireplace or in front of a wood burning fireplace?

There's nothing quite like curling up in front of a warm fire in a wood-burning fireplace, but for all the ambiance of the crackling logs and glowing embers, it's not the most efficient way to heat up a room.

What is the temperature difference between a fireplace and a stove?

If a fireplace, stove or insert is normally used as a supplement heat source or used to zone heat the house, the temperature difference might only be 15°F - 25°F. These variables are the main reason that manufacturers make equipment that is versatile and easy to use.

How to calculate BTU for heating?

The first technique is to simply figure the square footage of the space you want to heat. In warmer climates, multiply this number by 10 - 15. In more moderate climates, multiply by 20 - 30. And in cold climates multiply the square foot number by 30 - 40. For example, if you’re trying to heat 1000 square feet in a cold climate, 30,000 - 40,000 BTU’s will add significant warm air to your home.

What is a BTU?

A B ritish T hermal U nit, or BTU, is an international energy measurement. By definition, a British Thermal Unit is the amount of heat needed to raise one pound of water, 1° Fahrenheit.

What is BTU in air conditioning?

While air conditioning during hot weather, BTU’s measure the amount of heat a system can remove from your home each hour. Usually a British Thermal Unit or BTU, is thought of in the heating sense of the definition. That is, how much energy to make the indoor air temperature more comfortable.

How much gas does a 40,000 BTU gas fireplace use?

An average 40,000BTU gas fireplace burning natural gas will typically use 1 therm of gas, equivalent to 100 cubic feet of gas, every 2 and a half hours. A 40,000 BTU gas fireplace burning propane will typically go through 1 gallon of propane in just over 2 hours. How much gas a gas fireplace uses will be down to a range ...

How much gas does a fireplace use?

You can expect a standard gas fireplace to be around 30-40,000BTUs.

How Much Gas Does A Gas Fireplace Pilot Light Use?

A typical standing pilot light on a gas fireplace with an energy usage of 210W or 715BTUs will consume approximately 0.715 cubic feet of gas per hour, or 17 cubic feet of gas per day.

How much energy does a natural gas fireplace use?

1 Therm is also equivalent to 100 cubic feet of natural gas. The maximum energy input for our natural gas fireplace is 6.2kW, which is equivalent to 21,150BTUs/hour. The minimum energy input of 3.5kW is equal to approximately 11,950BTUs.

What factors affect how much gas a fireplace uses?

Factors that can influence how much gas a gas fireplace uses can include: The type of fireplace (natural vent, direct vent or ventless) Fuel type (natural gas or propane) Standing pilot or intermittent pilot light. Efficiency of the fireplace. Maximum heat output available.

How long does it take to heat a gas fireplace?

It would therefore take approximately just under 5 hours for our particular model of gas fireplace to use 1 Therm of energy, or use 100,000 BTUs worth.

Why do fireplaces use pilot lights?

However, many modern gas fireplaces use intermittent pilot lighting to help keep wastage of fuel to a minimum.

MAKE SURE YOU HAVE THE CORRECT GAS LINE SIZE FOR YOUR BURNER!

This is such an important part of making sure your fire pit has nice, tall flames! It’s the number one mistake I see people make when shopping fire pits. Watch the video, read the charts and make sure your Fire Pit works great!

EXTREMELY Important Gas Line Sizing Information

The biggest mistake that we see people make is not running a large enough gas line, or choosing a burner that operates at a much higher BTU rating than they’re line, gas meter, or LP tank can supply. The burners operate well even at 70% of the fuel capacity.

What is BTU in heating?

BTU (British Thermal Unit) is a unit of measurement for heat. For fireplaces, the higher the BTUs, the higher the heat output. But how do you know how many BTUs are right for your home? You can find out by measuring the square footage of the area you want to heat and then finding a fireplace with the right amount of BTUs for the space.

How many square feet is a Heirloom 50 fireplace?

Heirloom 50. 36,000 – 65,000. 1,900 – 3,000 square feet. When choosing what model fireplace is right for your home, variables such as the climate where you live, insulation, weatherproofing, ceiling height and the openness of your floor plan can impact the heating of that space. You don’t have to take the plunge alone.

What is a heirloom fireplace?

The Heirloom features authentic masonry style without the cost of a site-built masonry. With the largest fire viewing area in its class, the intense flames illuminate against a textured brick interior for a dramatic effect. This fireplace comes in three models, and heating capacities are listed below:

What is Novus fireplace?

Novus, Heatilator’s best-selling fireplace, has an established and renowned history of long-lasting performance. Its versatility is unmatched due to supreme installation flexibility and design customization options to fit in almost any space. It is available in four sizes and each of their heating capabilities are as follows:

How Many BTUs Is An Electric fireplace?

How Many BTUs Do I Need For An Electric fireplace?

• The higher the BTUs the more heat an electricfireplace is typically able to generate. However, most electric fireplaces can only generatethe maximum amount of heat from a 120V supply, which can be around 5000BTUsbased on a plug-in connection to a nearby electrical outlet. The difference of a couple of hundred BTUswill be fairly unnoticeable in real...

See more on fireplaceuniverse.com

Conclusion

Further Reading