How do I calculate softener resin?
Use the following formula to calculate the proper size:Multiply the number of people in your family times 70 (gallons of water used per day, national average).Multiply the answer by your water hardness in grains per gallon (to convert mg/l or ppm to grains, divide by 17.1). ... This is your "grains per day" number.
How many cubic feet is a 48000 grain water softener?
1.5 Cubic FootComplete 1.5 Cubic Foot High Capacity Water Softener Maximum 48,000 grain (48k) capacity Electromechanical 5600 metered valve 1.5 cubic feet high capacity resin (8% crosslink) On-demand (metered) regeneration 10-inch x 54-inch resin tank Standard brine...
How much does water softener resin weigh per cubic foot?
50 pounds per cubic footNet Weight (as shipped): 50 pounds per cubic foot.
How many grains is a 1 cubic foot water softener?
32,000 grainsWhat most dealers call a "32,000" grain system is more accurately described as a "1 cubic foot" system because it contains one cubic foot of softening resin. In order to get 32,000 grains capacity from this system the user would have to use 36 pounds of salt per regeneration!
Can I replace the resin in my water softener?
Unscrew the valve head and set it aside (you may need a helper to hold the resin tank while you twist). Dump out all the resin and gravel (Photo 2). Before you install the new resin, cut the new riser tube to the same height as the old one and insert it into the water softener resin tank. Refill the softener (Photo 3).
What size water softener do I need for a family of 5?
40,000 grain softenerFinally, taking into consideration salt use, the right size of water softener for a family of five would be a 40,000 grain softener.
How much resin should a water softener have?
0.64 to 2.00 cubic feetDepending on its size, the amount of resin should be anywhere from 0.64 to 2.00 cubic feet. When you get the amount right, you eliminate one potential source of water softener problem.
Is all water softener resin the same?
Not all water softener resin is the same. WaterBoss uses “fine mesh” resin, which is much smaller, so more beads are tightly packed into the bed compared to ordinary resins.
What is the best resin for water softeners?
Best Water Softener ResinsDuraWater C-100E Purolite Cation Resin. ... Aquatrol Water Softener Resin. ... Oceanic Water Systems Water Softening Resin. ... ABC Waters SOFRES1 Water Replacement Softener Resin. ... LiquaGen Water Softening Ion Exchange Resin. ... iFilters Water Softener Resin. ... A-Plus Waters.
What is 48000 grain water softener?
With 48,000 grain capacity and 12 ppm of clear water iron, this is an ideal softener for households with high levels of hardness and iron. It also has an built-in, self-cleaning filter screen for homes with sediment issues and private well water supplies.
What does 40 000 grain water softener mean?
40,000 Grain Water Softener. Uses Demand Regeneration technology to regenerate only when you need it – saving you money. Removes up to 125 grains per gallon of hardness and 10 ppm of clear water iron making it an ideal softener for households with high levels of hardness and iron.
How many grains do I need for a water softener?
Determine the proper water softener based on your hardness and number of people in your house.Hardness in Grains Per Gallon1 to 2 people*3 to 4 people*11-20 GPG32,000 Grain32,000 Grain21-30 GPG32,000 Grain40,000 Grain31-40 GPG40,000 Grain64,000 Grain41-50 GPG64,000 Grain80,000 Grain4 more rows
What is 48000 grain water softener?
With 48,000 grain capacity and 12 ppm of clear water iron, this is an ideal softener for households with high levels of hardness and iron. It also has an built-in, self-cleaning filter screen for homes with sediment issues and private well water supplies.
Is 48000 grain water softener enough?
This family would do best with either a 48,000 grain unit (1.5 cubic feet), or ideally a 64,000 grain unit (2 cubic feet). Anything smaller would run out of capacity and work too hard to keep up.
What is the grain capacity of a water softener?
Determine the proper water softener based on your hardness and number of people in your house.Hardness in Grains Per Gallon1 to 2 people*5 to 6 people*5-10 GPG32,000 Grain32,000 Grain11-20 GPG32,000 Grain40,000 Grain21-30 GPG32,000 Grain64,000 Grain31-40 GPG40,000 Grain64,000 Grain4 more rows
How do you determine water softener size?
To determine the appropriate water softener size for your home, multiply the number of people in your home by the gallons of water they use each day (80 gallons per person is the average). Multiply that number by the grains of hardness in your water to figure out how many grains need to be removed each day.
What You've Probably Seen Online
The internet is littered with websites selling 24,000 / 32,000 / 48,000 / 64,000 grain water softeners. What does this mean? As mentioned above, th...
The Result of This Marketing Technique
When softeners are sold by grain capacity, such as "32,000" or "48,000" grain systems, it is a severe disservice to the consumer. It ultimately lea...
A Better Way to Describe Softener Capacity
The only accurate way to describe water softener capacity is by cubic feet of resin and how much salt it will take per regeneration to achieve the...
Common Sense May Not Be All That Common
Despite this concept being around for a long time there are many, many dealers - both online and in-store - who do not understand this concept or r...
How to Properly Size A Water Softener
Properly sizing a water softener is all about matching your specific water quality and water use to a sufficiently sized system that will minimize...
Selecting A Softener to Match Your Conditions
At this point you've used your local conditions and your water usage to figure out how much softening is required per day. Water softeners are usua...
High Salt-Efficiency Water Softener Guide
In order to maximize salt efficiency and ultimately save heaps of salt it's important to understand how much softening capacity is yielded by diffe...
What is the capacity of a water softener?
The capacity of a water softener is simply the amount of hardness it can remove before it needs to regenerate. Water softener capacity is one of the most poorly understood aspects of water softener sizing by both dealers and consumers alike.
How to describe water softener capacity?
The only accurate way to describe water softener capacity is by cubic feet of resin and how much salt it will take per regeneration to achieve the stated capacity. In some U.S. and Canadian jurisdictions a water softener manufacturer must state the salt efficiency of the system being sold. The efficiency is stated in grains/pound of salt. This is the most accurate, honest, and direct way to describe a water softener. Rather than showing the consumer a make-believe capacity that can only be achieved in a laboratory or with massive amounts of salt, the efficiency shows how much salt will be used and how much softening capacity will result.
How many grains of resin is in a 32,000 grain system?
What is sold typically as a 32,000 grain system contains 1 cubic foot of water softening resin. If one looks at the specification provided by the resin manufacturer you will see that 1 cubic foot of resin under ideal laboratory conditions can remove about 32,000 grains of hardness.
How much hardness can a water softener remove?
As mentioned above, the capacity of a water softener describes how much hardness it can remove before it needs to regenerate. A "grain" of hardness is 1/7000th of a pound of dissolved calcium and magnesium. A water softener advertised as a "32,000" grain system should be able to remove 32,000 grains of hardness before it requires regeneration, ...
What is 32,000 grain softener?
When softeners are sold by grain capacity, such as "32,000" or "48,000" grain systems, it is a severe disservice to the consumer. It ultimately leads to customer dissatisfaction for one of a number of reasons. When a consumer purchases a "32,000" grain system expecting to get 32,000 grains capacity there are three different ways the consumer may be disappointed with the purchase:
Is it better to use less salt in a water softener?
This is a much more efficient way to operate a water softener. Less salt means fewer dollars spent, fewer trips to the salt store, less salt to lug, and less salt discharged to the septic system and the environment. But beware - not all water softeners can be set up in this high efficiency mode.
How many gallons does a water softener use?
Regenerating once-a-week also keeps the water consumption low; a water softener uses about 50 gallons when it regenerates.
How many cubic feet of resin is in 32,000 grains?
What most dealers call a "32,000" grain system is more accurately described as a "1 cubic foot" system because it contains one cubic foot of softening resin. In order to get 32,000 grains capacity from this system the user would have to use 36 pounds of salt per regeneration!
How much salt is needed to regenerate a cubic foot system?
What is very interesting though, is that if you use 6 pounds of salt to regenerate a one cubic foot system, it will yield 20,000 grains of softening capacity. Although the one cubic foot unit will cost a little more than a 0.75 cubic foot unit the savings in salt will make up for this cost difference very quickly.
How hard is a grain of water?
A "grain" of water hardness is equivalent to 1/7000th of a pound. It is very important to know your water hardness when you're considering the purchase of a softener. Guessing at this number will result in an improperly sized system. Also, when it comes time to programming your softener it will ask for the hardness value.
How much water does a household use?
You can use this information to figure out how much water your household uses per day, on average. If you don't have this information, simply multiply the number of people living in your home by 75 gallons per day. This will give a fairly accurate guesstimate of daily water use.
Does a water softener run out of salt?
The efficiency of your water softener dictates how much salt you have to buy, how much salt you have to lug, and how much salt gets discharged to the environment. Sizing a softener and considering its salt efficiency will ensure you purchase a softener that never runs out of soft water but also uses the least amount of salt as possible.
How do you calculate water hardness?
The best way to determine how much grains per gallon of water hardness you have is to get a TDS kit.
How many grains of water softener do I need?
Sizing a water softener depends on the water hardness level, how much water you use on a daily basis, and having the right amount of grains rating while minimizing the use of salt.
How to size a water softener: finding the perfect balance
The most common water softener GPG sizes you will find online and in stores are:
How to size a water softener – real efficiency guidelines
Now that you’ve learned to calculate the amount of resin a softener needs to work correctly in your home, there’s one more thing you should know.
How to size a water softener – the downsides
Sizing a water softener isn’t all that hard once you take the time to learn all of the information mentioned above.
Discard the need to size a water softener
The best water softener alternative by far is a water descaler. And that’s for several reasons.
Efficiency or your money back
You can purchase our water descaler here or on Amazon. No matter where you get it from, you’re covered by our one-year money-back guarantee.
Sizing a Water Softener – Calculator, Formula & Chart
If you are looking for a water softener, then you should make sure to understand the sizing for water softener. Generally 32,000 grain units ( 1 cubic foot of resin) is really good capacity for your home, but it is possible if you have a large family ( 6 or more), large house ( 41000 sq ft+) or very hard water ( over 16 grains).
High Salt-Efficiency Water Softener Sizing Guide
Do you know about Water Sediment Filter for Well Water?, if not lets have look on this below post.
