You can do it in the following way:
- Determine the length and width of the area you want to cover with soil. ...
- Calculate the area, multiplying the length by width. ...
- Establish the depth – thickness of the topsoil layer. ...
- Multiply the area and dirt layer thickness to obtain its volume: 56 * 0.5 = 28 yd³.
- The volume of soil required is equal to this value. ...
How to figure how much topsoil needed?
You can do it in the following way:
- Determine the length and width of the area you want to cover with soil. ...
- Calculate the area, multiplying the length by width. In our case, A = 14 * 4 = 56 yd². ...
- Establish the depth – thickness of the topsoil layer. ...
- Multiply the area and dirt layer thickness to obtain its volume: 56 * 0.5 = 28 yd³.
- The volume of soil required is equal to this value. ...
How many cubic yards in a ton of dirt?
As a general guide, 1 cubic yard of aggregate, sand, or dirt is equivalent to 1.5 tons. A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet. Secondly, how do you convert tons of soil to cubic yards? 100 lb/ft3 = 100 lb/ft3 × 33/1 ft3/yd3 = 2700 lb/yd3.
How to estimate volume of fill dirt?
Rectangular Area
- Measure the length, width and depth of the area you want to fill with dirt. Record your dimensions in inches. ...
- Calculate the volume of dirt needed to fill the area you measured by multiplying length (120 inches) by width (60 inches) by depth (30 inches). ...
- Convert cubic inches to cubic yards by dividing by 46,656 cubic inches. ...
How do you calculate cubic yards of gravel?
- We have to sum up these four different areas to get the area of the whole yard. ...
- It is time to choose the desired thickness (depth) of the gravel level. ...
- You can calculate the required volume of gravel by multiplying the gravel path area by the desired thickness: 23 yd² * 0.1 yd = 2.3 yd³
How much area does a cubic yard of dirt cover?
100 square feetHow Much Does A Yard Cover? A cubic yard of material can be spread to cover 100 square feet (10×10 foot area) at 3 inches of depth. It's a very helpful ratio because when spreading mulch, a depth of 3 inches is considered ideal.
How much does 3 cubic yards of dirt cover?
Coverage Chart- Bulk MaterialDepth1 Cubic Yard Covers1”324 sq feet2”162 sq feet3”108 sq feet4”81 sq feet9 more rows•Jan 29, 2010
How much does 1 cubic yard of dirt look like?
You can easily calculate cubic yardage by converting all three dimensions of your material into yards and multiplying them. For example, if you dig up a flower bed that is 9 feet long, 3 feet wide and 12 inches deep, you will have one cubic yard of dirt.
Will 2 yards of dirt fit in a pickup truck?
Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel. Small Pickups and Trailers: Can usually handle 1 cubic yard of soil to maybe 1½ of mulch.
How many yards is a dump truck?
Dump Truck Cubic Yardage - The Basics While there is room for variance, most full-size dump trucks have a capacity of between 10 and 16 cubic yards. These types of vehicles often have their capacity listed in the owner's manual.
How many cubic yards is a pickup truck?
The bed of a full size standard pickup has dimensions of: 8' long X 5.33' wide X 1.5' high. When loaded level full, a truck of this size will hold 2.5 cubic yards of material. The following chart outlines some additional common capacities of the full-sized pickup truck.
How many wheelbarrows are in a yard of dirt?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
How much money is a yard of dirt?
Topsoil, Dirt and Sand Costs Topsoil costs $12 to $55 per cubic yard; fill dirt ranges from $7 to $12 per cubic yard; and sand typically falls between $15 and $40 per cubic yard.
How many 40lb bags of topsoil are in a yard?
How many bags of topsoil in a cubic yard:- there are 36 bags of 40lb of topsoil in a cubic yard. A 40lb bag of topsoil yields 0.75 cubic feet, and 1 cubic yard is equal as 27 cubic feet, so number of bags of 40lb of topsoil in a yard = 27/0.75 = 36 bags, so, there are 36 bags of 40 lb of topsoil in a cubic yard.
Will 1 cubic yard fit in a pickup?
A regular size pick-up will hold three cubic yards of mulch (a full load). Two cubic yards is about body level full. When picking up soils, sands and gravels, one cubic yard is all that is recommended on a pick-up truck.
How many five gallon buckets are in a cubic yard?
How many 5 gallon buckets would I need to fill to equal 1 cubic yard? A. There are 202 gallons in a cubic yard. So if you completely fill a 5 gallon bucket up, it would take approximately 40 of those buckets to make up a yard.
How much is a truckload of dirt?
One truck load typically holds 10 to 14 cubic yards of dirt. Installation and rough spreading add $200 to $400 to your overall cost. A one-yard pickup truck of fill dirt hauled yourself costs about $20.
How many wheelbarrows are in a yard of dirt?
Depending upon your wheelbarrow size (i.e. 2 or 3 cubic feet per wheelbarrow load), it will take 9 to 14 full loads to equal 1 cubic yard.
How much topsoil do I need for 1000 square feet?
You will need approximately 500 cubic feet, or 18.5 cubic yards, or 14m3 of topsoil for 1000 square feet area at recommended depth of 6 inches (150mm) thick, 330 cubic feet or 12 cubic yards of topsoil at 4 inches depth, and 1000 cubic feet or 37 cubic yards of topsoil at 12 inches depth for your garden, lawn or ...
How many square feet are in a cubic yard?
Regarding this, “how many square feet are in 1 cubic yard?”, there are 108 square feet coverage in 1 cubic yard of material for standard depth or height of 3 inches deep. Mathematical calculation such as square feet = (Cubic yards × 27) ÷ Height or Depth in feet, square feet = (1×27) ÷ (3/12) = 108 sq ft.
How many cubic yards equal a yard?
ENDMEMO1 cubic yard =1 yards1 yards =2 cubic yard =1.2599 yards2 yards =3 cubic yard =1.4422 yards3 yards =4 cubic yard =1.5874 yards4 yards =5 cubic yard =1.71 yards5 yards =25 more rows
How to calculate cubic yards?
Calculate your cubic yards: Divide cubic feet by 27 to convert to cubic yards and this is your answer
How to calculate feet and inches?
If you measured in feet only skip to "Calculate". If you measured in feet & inches, divide inches by 12 and add that to your feet measure to get total feet. If you measured in inches only, divide inches by 12 and that is your measurement in feet.
How to find the volume of soil in cubic yards?
Using the graphic below as a reference, you can see we want to multiply in feet the length x width x height ÷ 27 to get the volume in cubic yards of soil that you need.
How to find cubic feet of soil?
To get the amount of cubic feet of soil instead of cubic yards, you would take you measurements in feet & multiply the length x width x depth = how many cubic feet of product you need to fill the volume of this garden or raised bed.
How much does a yard 3 of topsoil weigh?
A cubic yard of typical topsoil weighs about 2700 pounds or 1.35 tons. A square yard of a garden with a depth of 1 foot (30.48 cm) weighs about 900 pounds (410 kg) or slightly less than half a ton. The water content of the soil is assumed to be that of a moderately damp (e.g. freshly dug).
How much soil density is needed for a soil calculator?
Also, the soil calculator uses a standard soil density of 100 lbs/ft 3 (1600 kg/m 3) which may be somewhat different depending on the precise topsoil mixture you purchase. Blended topsoil is usually less dense, and thus fewer pounds of it will be required. The calculation process is:
What is the density of soil?
The density of typical soil is 100 lb/ft 3 (1600 kg/m 3 ). This corresponds to moderately damp consolidated soil (rammed earth) and is the number used in our software. When the soil arrives it will be loose and likely have a density of just 75 lb/ft 3 or 1200 kg/m 3 and will require a larger vehicle to transport.
How much is a ton of soil?
A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet. Soil is assumed relatively damp, since adding water can increase or decrease the density of the soil considerably (e.g. if it was raining or if you dig up and leave dirt under the sun so water evaporates).
How much soil is a tonne?
A tonne of condensed, moderately damp soil typically fills about 0.625 m 3 (cubic meters). It can be more or less dense depending on water content and the exact composition.
What is the top soil layer?
Topsoil (soil, dirt) is important since plants derive most of their vital nutrients from this upper, outermost layer of soil, usually between 2 inches (5.1 cm) to 8 inches (20 cm) deep. It is here that most of the Earth's bio activity occurs - decomposition, excrements, etc. all end up here, and it has the best conditions for most life thus it has the highest concentration of organic matter and microorganisms. The soil is composed of a mix of mineral particles, organic matter, water, and air.
How to find the soil weight?
Multiply the volume by the density (in the same units) to get the soil weight
How much soil do I need?
To answer this question, the first step is to establish the volume of soil needed. You can do it in the following way:
How to calculate weight of cubic yard of soil?
To calculate the weight of a cubic yard of soil, you simply have to multiply the volume by its density. Just type the density of soil (you will probably find it on the packaging) into the topsoil calculator and this calculation will be performed effortlessly.
How to calculate the volume of soil needed?
You can calculate the required volume of soil by multiplying the grass yard area by the desired thickness of soil. The last thing to do is to assess the estimated weight of the required soil and its cost. The weight of the cargo may come in handy when transporting the soil.
What is soil made of?
Have you ever wondered what are you stomping on? Was it it always here or has it been here since eternity? Well, the easiest way to answer these questions would be to explain that the soil definition is that it is a mixture of things that have fallen or just found themselves on the ground. It consists of organic matter, liquids, gases, minerals, and living organisms. The soil has been created by endless interactions between those ingredients, with the additional influence of some third parties, such as climate, weather and lots and lots of time. It usually starts with a parent material such as quartz, calcite or feldspar which undergoes weathering – the process of disintegration. Weathering can be caused by:
What is soil degradation?
Soil degradation is the soil process most feared by farmers and gardeners alike. It makes the soil lose its cultivating capabilities by weakening the structure and washing out the rich ingredients. There are several mechanisms of soil degradation:
What is the best type of soil for a garden?
Loamy soil – the best type of soil a gardener can dream of! It is very rich in ingredients, it holds water very well, and its structure assures good drainage. These perfect properties are caused by a well-balanced composition of sand, clay, and silt.
How to prevent soil degradation?
In order to prevent soil degradation and keep it in good condition, you should care about the soil in your garden, yard or field just as much as you care for your plants or grass. Maintaining the quality of your soil is called a soil conservation.
How to calculate cubic yards?
To calculate cubic yards we use the formula: Cubic yards = Length (ft) x Width (ft) x Depth (ft) ÷ 27. Measure the length, width and depth of your area and then multiply the figures together to calculate a result in cubic feet. Dividing the result by 27 will give you a total in cubic yards.
How many cubic feet are there in a yard?
There are 27 cubic feet in a cubic yard. This means that if you want to convert from cubic feet to cubic yards, you should divide your figure by 27.
How to convert square feet to cubic yards?
To convert square feet to cubic yards, simply multiply your square footage figure by the height/depth in feet. This gives you a result in cubic feet. Divide your result by 27 to get your cubic yards measurement.
Is a cubic yard a ton?
The reason for this is because the cubic yard is a unit of volume and the ton, kilogram or pound is a unit of weight. To convert between the two, you'll need to know the density of the substance. To give an extreme example, the total weight of a cubic yard of feathers will be far lighter than a cubic yard of sand.
How many cubic feet are in a cubic yard?
To give you a sense of volume, there are 27 cubic feet in one cubic yard (3′ x 3′ x 3′). A full-size pickup truck holds about 2 cubic yards. 4. Multiply your cubic yardage by the inches of depth you need to fill. The calculations so far are based on one inch of fill depth.
Why is it important to estimate dirt?
A fairly accurate estimate is important for a number of reasons. Quality fill dirt is available at very competitive rates, but if you order too much, you are wasting your money. On the other hand, if you do not order enough, you will incur unnecessary delivery costs. Also, you incur the cost associated with having work delays if work stops until more dirt is delivered.
How to convert square footage to cubic yards?
Fill dirt is sold in cubic yards. To convert your square footage into cubic yards, first divide your square footage by 1,000, and then multiply your result by 3. Your result tells you how many cubic yards will fill one inch of depth.
How many cubic yards of fill for a shed?
For our garden shed and path, assume you need a two -inch depth. You would multiply .54 cubic yards x 2 inches = 1.08 cubic yards of fill.
Why is fill dirt needed?
Fill dirt is necessary for site preparation and as base for a home or building, an addition, road, or sidewalk. These structures need a solid, stable base of support. Fill dirt is not suitable for supporting a garden or vegetation.
What is fill dirt?
Fill dirt is the material used to fill low areas, change the surface grade to improve drainage, or build up ground elevation for landscaping projects or on construction sites. Fill dirt, also called simply “fill”, consists of partially broken down soil that contains clay, sand, silt, and stones, ...
How many cubic yards are needed for 180 sq ft?
Applying that formula to the example above using 180 square feet, you would need .54 cubic yards:
